|
T. Saeki et al., “Study on Fabrication of Superconducting RF 9-cell Cavity for ILC at KEK”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOBB203, pp. 3132-3134. |
|
T. Higo et al., “Comparison of High Gradient Performance in Varying Cavity Geometries”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI018, pp. 2741-2743. |
|
T. Kubo et al., “Electron Beam Welding for High Gradient Superconducting Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO015, pp. 2346-2348. |
|
T. Kubo, Y. Ajima, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “In-house Production of a Large-Grain Single-Cell Cavity at Cavity Fabrication Facility and Results of Performance Tests”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2519-2521. |
|
T. Saeki et al., “Studies of Fabrication Procedure of 9-cell SRF Cavity for ILC Mass-production at KEK.”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2528-2530. |
|
K. Nohara et al., “Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2869-2872. |
|
T. Dohmae, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “Production and Investigation of Superconducting 9-Cell Cavity Made of Large Grain Nb in KEK”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2141-2144. |
|
K. Umemori et al., “Vertical Test Results of Nitrogen Doped SRF Cavities at KEK”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2154-2157. |
|
M. Yamanaka et al., “Hydroforming SRF Three-cell Cavity from Seamless Niobium Tube”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2170-2172. |
|
T. Miyazawa, A. H. Hashimoto, M. Yamanaka, T. Kikuchi, and K. Mase, “Morphologies of Oxygen-Free Titanium and Palladium/Titanium Thin Films: New Non-Evaporable Getter (NEG) Coatings”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 84-87. |
