|
M. Wake et al., “Tests of 1.5 meter Model 50mm SSC Collider Dipoles at Fermilab”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2173-2176. |
|
W. Koska et al., “Tests of 40 mm SSC Dipole Model Magnets with Vertically Split Yokes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2179-2182. |
|
S. Gourlay et al., “Quench Performance of Superconducting Quadrupole Magnets for the New Fermilab Low Beta Insertion”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2227-2230. |
|
R. W. Hanft et al., “Magnetic Performance of New Fermilabe High Gradient Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2233-2236. |
|
J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2236-2239. |
|
S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399. |
|
K. Chow et al., “Design and Fabrication of Racetrack Coil Accelerator Magnets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP23F, pp. 2026-2028. |
|
S. Caspi et al., “Mechanical Design of a High Field Common Coil Magnet”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP119, pp. 3236-3238. |
|
J. DiMarco et al., “Fermilab-Built SSC Collider Dipoles Using Low Temperature Curing Insulation Systems with and without Glass Tape”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2769-2772. |
|
J. Berg et al., “An engineering prototype of a late stage ionization cooling cell for a muon collider”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR34, this conference. |
