Favourites
For Word
[n] K. W. Zieher and A. Hornung, “Investigation of a Modified Helix Loaded Superconducting Resonator for Acceleration of Heavy Ions”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3312-3314.
[n] N. R. Bell and L. Phillips, “Generation of Flat Ultra-Low Emittance Beams”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3398-3400. doi:10.18429/JACoW-IPAC2018-THPAK072
[n] M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
[n] M. Giovannozzi, A. Huschauer, O. Michels, A. Nicoletti, and G. Sterbini, “Analysis of Performance Fluctuations for the CERN Proton Synchrotron Multi-Turn Extraction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3135-3138. doi:10.18429/JACoW-IPAC2017-WEPIK088
[n] C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169.
[n] D. E. Kim et al., “Development of IVUN at Pohang Accelerator Laboratory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC115, pp. 2273-2275.
[n] H. F. Vogel and J. J. Rosenthal, “Cement Potted Coils for Muon Channel Magnets”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P24, pp. 430-432.
[n] D. Schulze, K. Mittag, B. Pioszcyk, H. Strube, and J. Vetter, “Superconducting Resonators in the Presence of Radiation Pressure and Frequency Feedback”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 160-162.
[n] H. Burkhardt, B. Goddard, and V. Mertens, “Protection Devices in the Transfer Lines to the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB052, pp. 1721-1723.
[n] E. W. Bethel et al., “Big Data Analysis and Visualization: What Do Linacs and Tropical Cyclones Have in Common?”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI2, pp. 299-303.
[n] M. Mara et al., “!CHAOS Historical Engine”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA006, pp. 3158-3160.
[n] R. Keller, R. Gough, R. Thomae, K. Leung, J. Greer, and P. Bach, “Measurements on the H- Ion Source and Low Energy Beam Transport Section for the SNS Front-End Systems”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD09, pp. 223-225.
[n] D. Schulze, “Dead Beat Filling and Feedforward RF Control for the Spallation Neutron Source SNQ”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B03, pp. 39-42.
[n] K. Mittag, “Beam Dynamics in a Proton Linear Accelerator for a Neutron Spallation Source”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-10, pp. 253-256.
[n] K. Takayama, T. Adachi, E. Nakamura, and H. Someya, “Beam Dynamical Issues of the KEK All-ion Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC107, pp. 3227-3229.
[n] H. Ishii, J. Adachi, T. Kosuge, and H. Tanaka, “Interlock System for a Magnetic-Bearing Pulse Selector”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 385-387. doi:10.18429/JACoW-MEDSI2018-THPH23
[n] Q. King, K. T. Lebioda, M. Magrans de Abril, M. Martino, R. Murillo-Garcia, and A. Nicoletti, “CCLIBS: The CERN Power Converter Control Libraries”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 950-953. doi:10.18429/JACoW-ICALEPCS2015-WEPGF106
[n] A. Nicoletti and M. Martino, “Data-driven Controller Design Using the CERN Power Converter Control Libraries (CCLIBS)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1335-1337. doi:10.18429/JACoW-IPAC2019-TUPMP039
[n] L. R. Doolittle et al., “Plans for Precision RF Controls for FERMI@ELETTRA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN116, pp. 2310-2312.
[n] D. Schulze et al., “RF Control of Superconducting Helically Loaded Cavities”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G01, pp. 156-162.
[n] H. Beger, A. Fiebig, C. E. Hill, R. Hohbach, F. Nitsch, and S. Talas, “Design, Construction and Operation of the New CERN SC RF System”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-02, pp. 146-150.
[n] J. Q. Lan, B. Sun, Y. C. Sun, and H. Xu, “Beam Polarization Theory and its Application to HLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE005, pp. 4518-4520.
[n] H. Eschelbacher and H. Schopper, “An Investigation of the Slotted Iris Structure with Drift Tubes”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-05, pp. 502-507.
[n] R. Apsimon, J. Esberg, A. Latina, D. Schulte, and J. A. Uythoven, “Design Considerations of the Final Turnaround Regions for the CLIC Drive Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 485-488. doi:10.18429/JACoW-IPAC2014-MOPME049
[n] J. R. Aggus, D. Edwards, H. J. Halama, and J. C. Herrera, “Characteristics of the ISABELLE Vacuum System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1287-1290.
[n] J. Y. Liu et al., “Development of the X-Band Megawatt-Class Coaxial Magnetrons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2346-2348. doi:10.18429/JACoW-IPAC2021-TUPAB357
[n] M. R. Davis et al., “Latest Performance Results from the FONT 5 Intra Train Beam Position Feedback System at ATF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME053, pp. 3049-3051.
[n] G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693.
[n] G. Mrotzek, R. Cernik, J. Flaherty, and P. D. Quinn, “Photon Beam Position Monitors on the SRS at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1563-1566.
[n] B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL064, unpublished.
[n] G. Rakowsky, E. B. Blum, S. Krinsky, and D. Lynch, “NSLS In-Vacuum Undulators and Mini-Beta Straights”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH003, pp. 2453-2455.
[n] S. Pal, U. Panda, and R. Basak, “Process Control for Parallel Run of Two Helium Liquefiers at VEC Centre, Kolkata”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCD02, pp. 285-288.
[n] L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
For LaTeX
Use Complete Form
For BibTeX
References
- K. W. Zieher and A. Hornung, “Investigation of a Modified Helix Loaded Superconducting Resonator for Acceleration of Heavy Ions”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3312-3314.
- N. R. Bell and L. Phillips, “Generation of Flat Ultra-Low Emittance Beams”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3398-3400.
- M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
- M. Giovannozzi, A. Huschauer, O. Michels, A. Nicoletti, and G. Sterbini, “Analysis of Performance Fluctuations for the CERN Proton Synchrotron Multi-Turn Extraction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3135-3138.
- C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169.
- D. E. Kim et al., “Development of IVUN at Pohang Accelerator Laboratory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC115, pp. 2273-2275.
- H. F. Vogel and J. J. Rosenthal, “Cement Potted Coils for Muon Channel Magnets”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P24, pp. 430-432.
- D. Schulze, K. Mittag, B. Pioszcyk, H. Strube, and J. Vetter, “Superconducting Resonators in the Presence of Radiation Pressure and Frequency Feedback”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 160-162.
- H. Burkhardt, B. Goddard, and V. Mertens, “Protection Devices in the Transfer Lines to the LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB052, pp. 1721-1723.
- E. W. Bethel et al., “Big Data Analysis and Visualization: What Do Linacs and Tropical Cyclones Have in Common?”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI2, pp. 299-303.
- M. Mara et al., “!CHAOS Historical Engine”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA006, pp. 3158-3160.
- R. Keller, R. Gough, R. Thomae, K. Leung, J. Greer, and P. Bach, “Measurements on the H- Ion Source and Low Energy Beam Transport Section for the SNS Front-End Systems”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD09, pp. 223-225.
- D. Schulze, “Dead Beat Filling and Feedforward RF Control for the Spallation Neutron Source SNQ”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B03, pp. 39-42.
- K. Mittag, “Beam Dynamics in a Proton Linear Accelerator for a Neutron Spallation Source”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S4-10, pp. 253-256.
- K. Takayama, T. Adachi, E. Nakamura, and H. Someya, “Beam Dynamical Issues of the KEK All-ion Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC107, pp. 3227-3229.
- H. Ishii, J. Adachi, T. Kosuge, and H. Tanaka, “Interlock System for a Magnetic-Bearing Pulse Selector”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 385-387.
- Q. King, K. T. Lebioda, M. Magrans de Abril, M. Martino, R. Murillo-Garcia, and A. Nicoletti, “CCLIBS: The CERN Power Converter Control Libraries”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 950-953.
- A. Nicoletti and M. Martino, “Data-driven Controller Design Using the CERN Power Converter Control Libraries (CCLIBS)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1335-1337.
- L. R. Doolittle et al., “Plans for Precision RF Controls for FERMI@ELETTRA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN116, pp. 2310-2312.
- D. Schulze et al., “RF Control of Superconducting Helically Loaded Cavities”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G01, pp. 156-162.
- H. Beger, A. Fiebig, C. E. Hill, R. Hohbach, F. Nitsch, and S. Talas, “Design, Construction and Operation of the New CERN SC RF System”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-02, pp. 146-150.
- J. Q. Lan, B. Sun, Y. C. Sun, and H. Xu, “Beam Polarization Theory and its Application to HLS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE005, pp. 4518-4520.
- H. Eschelbacher and H. Schopper, “An Investigation of the Slotted Iris Structure with Drift Tubes”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-05, pp. 502-507.
- R. Apsimon, J. Esberg, A. Latina, D. Schulte, and J. A. Uythoven, “Design Considerations of the Final Turnaround Regions for the CLIC Drive Beam”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 485-488.
- J. R. Aggus, D. Edwards, H. J. Halama, and J. C. Herrera, “Characteristics of the ISABELLE Vacuum System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1287-1290.
- J. Y. Liu et al., “Development of the X-Band Megawatt-Class Coaxial Magnetrons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2346-2348.
- M. R. Davis et al., “Latest Performance Results from the FONT 5 Intra Train Beam Position Feedback System at ATF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME053, pp. 3049-3051.
- G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693.
- G. Mrotzek, R. Cernik, J. Flaherty, and P. D. Quinn, “Photon Beam Position Monitors on the SRS at Daresbury”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1563-1566.
- B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL064, unpublished.
- G. Rakowsky, E. B. Blum, S. Krinsky, and D. Lynch, “NSLS In-Vacuum Undulators and Mini-Beta Straights”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH003, pp. 2453-2455.
- S. Pal, U. Panda, and R. Basak, “Process Control for Parallel Run of Two Helium Liquefiers at VEC Centre, Kolkata”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCD02, pp. 285-288.
- L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
Back to search