Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. V. Khodak and V. A. Kushnir, “Time Performance Control in Electron Linacs with Thermionic RF Gun”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI064, pp. 1780-1782.
[n] D. R. Bett et al., “Improving the Performance of an Orbit Feed-forward Based on Quadrupole Motion at the KEK ATF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1931-1934. doi:10.18429/JACoW-IPAC2017-TUPIK097
[n] Y. G??mez Mart?¡nez et al., “MYRRHA 80 kW CW RF Coupler Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4115-4117. doi:10.18429/JACoW-IPAC2019-THPTS007
[n] I. V. Khodak, V. A. Kushnir, V. V. Mitrochenko, and D. L. Stepin, “Thermionic RF Gun with High-Temperature Metallic Cathode”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI065, pp. 1777-1779.
[n] J.-L. Bouly et al., “Ion Charge State Increase 1 -> N for the Acceleration of Alkali and Metallic Radioactive Ion Beams”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP10A, pp. 1403-1405.
[n] M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 257-260. doi:10.18429/JACoW-IBIC2022-TUP16
[n] R. Cary and G. Shasharina, “Expression Templates for Truncated Power Series”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P119, pp. 2654-2656.
[n] H. Ishii, T. Kosuge, and H. Nitani, “The Development of Vacuum Gauge Monitoring and Control System using Web2CToolkit”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 96-98. doi:10.18429/JACoW-PCaPAC2018-WEP26
[n] S. Petracca and I. Pinto, “Particle accelerators to meet gravitational waves”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 218-221. doi:10.18429/JACoW-IPAC2023-MOPA080
[n] R. P. Johnson et al., “A Six-dimensional Muon Beam Cooling Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS007, pp. 2409-2411.
[n] R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
[n] W. Gai, M. Conde, R. Konencny, W. Liu, and J. Power, “Results from The Argonne Wakefield Accelerator Test Facility”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH203, pp. 587-590.
[n] E. Acerbi, F. Alessandria, and L. Rossi, “Possible Movements of the Milan Superconducting Coils Under the Influence of Mechanical Stresses”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B14, pp. 71-74.
[n] H. Iinuma et al., “Four-dimensional phase space control with a strongly X-Y coupled beam for the three-dimensional spiral trajectory with a validation experiment with 0.12 m radius of compact storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC56, unpublished.
[n] P. M. Hanlet et al., “Studies of RF Breakdown of Metals in Dense Gases”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP054, pp. 3259-3261.
[n] T. J. Roberts et al., “MANX, A 6-D Muon Cooling Demonstration Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP056, pp. 3331-3333.
[n] Y. Morita et al., “Vertical Cold Test of the Crab Cavity with a Co-axial Beam Pipe”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR015, pp. XX-XX.
[n] J. S. Chai, J. H. Ha, H. Y. Lee, Y. S. Kim, S. Oh, and M. Yoon, “New Design and Development of 13 MeV PET Cyclotron in Korea”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP80, pp. 3137-3139.
[n] L. Sito et al., “Beam-beam long range compensator mechanical demonstrator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4916-4918. doi:10.18429/JACoW-IPAC2023-THPM015
[n] A. Jiang et al., “Matching the beam from AGS to the EIC Hadron Storage Ring with excellent emittance preservation”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 505-508. doi:10.18429/JACoW-NAPAC2025-TUP062
[n] I. V. Khodak and V. A. Kushnir, “RF Electron Gun with Driven Plasma Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP027, pp. 1991-1993.
[n] S. Fleury, E. Todesco, M. Barberan Marin, and M. Bernardini, “HL-LHC magnet production: building a complex planning to identify bottlenecks”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1645-1648. doi:10.18429/JACoW-IPAC2024-TUPS08
[n] L. Guo et al., “RF design of the 49 and 98 MHz normal-conducting cavities for bunch splitting in the EIC HSR”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7310, unpublished.
[n] L. Guo et al., “Vertical tests of the 166.6 MHz HOM-damped Prototype SRF Cavities for HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3086-3089. doi:10.18429/JACoW-IPAC2023-WEPA191
[n] K. Ruisard, A. Aleksandrov, A. Zhukov, A. Hoover, and T. Thompson, “Progress towards halo modeling at the SNS Beam Test Facility”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB044, unpublished.
[n] O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 192-194. doi:10.18429/JACoW-CYCLOTRONS2019-TUP017
[n] E. Froidefond, F. Bouly, P.-O. Dumont, and D. Vandeplassche, “Study and Design of a Fast Switching Magnet for the MYRRHA Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2356-2359. doi:10.18429/JACoW-IPAC2021-TUPAB361
[n] B. Zhu, J. Liu, P. Wang, S. Liu, and Y. Wang, “Operational Status and Fault Analysis of the CSNS Vacuum System and Development Progress of the CSNS-II Vacuum System”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7675, unpublished.
[n] L. Wartski, J. Marcou, and S. Roland, “Detection of Optical Transition Radiation and Its Application to Beam Diagnostics”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 544-549.
[n] T. Hezel, R. Rossmanith, B. Krevet, and H. O. Moser, “Conceptual and Experimental Feasibility Study of a Superconductive Micro-Undulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P122, pp. 3512-3514.
[n] M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122
[n] E. Barnes et al., “Design, prototyping and production of the vacuum assembly for eXperiments (VAX) for HL-LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1056, unpublished.
[n] X. Guo, H. Deng, J. Chen, S. Zhao, X. Wu, and X. Huang, “Electromagnetic-thermal coupling study of the SHINE injector cavity”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP52, unpublished.
[n] K. Pieterman, J. A. M. Dam, C. Commeaux, and G. Levy, “AGOR Cryogenics: A Status Report”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F3-01, pp. 220-223.
[n] A. Kilicgedik et al., “RF Measurements and Tuning of the Test Module of 800 MHz Radio-Frequency Quadrupole”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 438-440. doi:10.18429/JACoW-LINAC2022-TUPOPA12
For LaTeX
Use Complete Form
For BibTeX
References
- I. V. Khodak and V. A. Kushnir, “Time Performance Control in Electron Linacs with Thermionic RF Gun”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI064, pp. 1780-1782.
- D. R. Bett et al., “Improving the Performance of an Orbit Feed-forward Based on Quadrupole Motion at the KEK ATF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1931-1934.
- Y. G??mez Mart?¡nez et al., “MYRRHA 80 kW CW RF Coupler Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4115-4117.
- I. V. Khodak, V. A. Kushnir, V. V. Mitrochenko, and D. L. Stepin, “Thermionic RF Gun with High-Temperature Metallic Cathode”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI065, pp. 1777-1779.
- J.-L. Bouly et al., “Ion Charge State Increase 1 -> N for the Acceleration of Alkali and Metallic Radioactive Ion Beams”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP10A, pp. 1403-1405.
- M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 257-260.
- R. Cary and G. Shasharina, “Expression Templates for Truncated Power Series”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P119, pp. 2654-2656.
- H. Ishii, T. Kosuge, and H. Nitani, “The Development of Vacuum Gauge Monitoring and Control System using Web2CToolkit”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 96-98.
- S. Petracca and I. Pinto, “Particle accelerators to meet gravitational waves”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA080, pp. 218-221.
- R. P. Johnson et al., “A Six-dimensional Muon Beam Cooling Experiment”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS007, pp. 2409-2411.
- R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
- W. Gai, M. Conde, R. Konencny, W. Liu, and J. Power, “Results from The Argonne Wakefield Accelerator Test Facility”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH203, pp. 587-590.
- E. Acerbi, F. Alessandria, and L. Rossi, “Possible Movements of the Milan Superconducting Coils Under the Influence of Mechanical Stresses”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B14, pp. 71-74.
- H. Iinuma et al., “Four-dimensional phase space control with a strongly X-Y coupled beam for the three-dimensional spiral trajectory with a validation experiment with 0.12 m radius of compact storage ring”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC56, unpublished.
- P. M. Hanlet et al., “Studies of RF Breakdown of Metals in Dense Gases”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP054, pp. 3259-3261.
- T. J. Roberts et al., “MANX, A 6-D Muon Cooling Demonstration Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP056, pp. 3331-3333.
- Y. Morita et al., “Vertical Cold Test of the Crab Cavity with a Co-axial Beam Pipe”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR015, pp. XX-XX.
- J. S. Chai, J. H. Ha, H. Y. Lee, Y. S. Kim, S. Oh, and M. Yoon, “New Design and Development of 13 MeV PET Cyclotron in Korea”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP80, pp. 3137-3139.
- L. Sito et al., “Beam-beam long range compensator mechanical demonstrator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM015, pp. 4916-4918.
- A. Jiang et al., “Matching the beam from AGS to the EIC Hadron Storage Ring with excellent emittance preservation”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 505-508.
- I. V. Khodak and V. A. Kushnir, “RF Electron Gun with Driven Plasma Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP027, pp. 1991-1993.
- S. Fleury, E. Todesco, M. Barberan Marin, and M. Bernardini, “HL-LHC magnet production: building a complex planning to identify bottlenecks”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS08, pp. 1645-1648.
- L. Guo et al., “RF design of the 49 and 98 MHz normal-conducting cavities for bunch splitting in the EIC HSR”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7310, this conference.
- L. Guo et al., “Vertical tests of the 166.6 MHz HOM-damped Prototype SRF Cavities for HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA191, pp. 3086-3089.
- K. Ruisard, A. Aleksandrov, A. Zhukov, A. Hoover, and T. Thompson, “Progress towards halo modeling at the SNS Beam Test Facility”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB044, unpublished.
- O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 192-194.
- E. Froidefond, F. Bouly, P.-O. Dumont, and D. Vandeplassche, “Study and Design of a Fast Switching Magnet for the MYRRHA Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2356-2359.
- B. Zhu, J. Liu, P. Wang, S. Liu, and Y. Wang, “Operational Status and Fault Analysis of the CSNS Vacuum System and Development Progress of the CSNS-II Vacuum System”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7675, this conference.
- L. Wartski, J. Marcou, and S. Roland, “Detection of Optical Transition Radiation and Its Application to Beam Diagnostics”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 544-549.
- T. Hezel, R. Rossmanith, B. Krevet, and H. O. Moser, “Conceptual and Experimental Feasibility Study of a Superconductive Micro-Undulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P122, pp. 3512-3514.
- M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2889-2892.
- E. Barnes et al., “Design, prototyping and production of the vacuum assembly for eXperiments (VAX) for HL-LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1056, this conference.
- X. Guo, H. Deng, J. Chen, S. Zhao, X. Wu, and X. Huang, “Electromagnetic-thermal coupling study of the SHINE injector cavity”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP52, unpublished.
- K. Pieterman, J. A. M. Dam, C. Commeaux, and G. Levy, “AGOR Cryogenics: A Status Report”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F3-01, pp. 220-223.
- A. Kilicgedik et al., “RF Measurements and Tuning of the Test Module of 800 MHz Radio-Frequency Quadrupole”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 438-440.
Back to search