Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Ghatak, A. S. Dhavale, N. Gupta, and K. C. Mittal, “A Kinetic Model of Multipaction for SRF Cavities for Accelerator Driven Sub-Critical System (ADSS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP090, pp. 1741-1743.
[n] H. Henke and O. Napoly, “Wake Fields Between Two Parallel Resistive Plates”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1046-1049.
[n] J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1687-1690. doi:10.18429/JACoW-IPAC2024-TUPS26
[n] S. K. Guharay, C. K. Allen, M. Reiser, C. R. Chang, and K. Saadatmand, “A Compact ESQ System for Transport and Focusing of H- Beam from Ion Source to RFQ”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-16, pp. 338-340.
[n] M. Fouaidy, A. Caruette, T. Junquera, and Q. S. Shu, “Surface Scanning Thermometers for Diagnostic Purpose of the TESLA SRF Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F06, pp. 559-563.
[n] N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687. doi:10.18429/JACoW-SRF2021-WEOCAV03
[n] P. Di Marcantonio, R. Cirami, B. Jeram, and G. Chiozzi, “Transmitting huge amounts of data design implementation and performance of the Bulk Data transfer mechanism in ACS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_032.
[n] E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n] Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR047, pp. 4080-4082.
[n] C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 503-506.
[n] A. Castilla, J. R. Delayen, V. S. Morozov, and T. Satogata, “Employing Twin Crabbing Cavities to Address Variable Transverse Coupling of Beams in the MEIC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 80-82. doi:10.18429/JACoW-IPAC2014-MOPRO011
[n] N. Holtkamp et al., “Longitudinal Beam Dynamics of the RWT-Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 676-679.
[n] V. Petrillo, M. Ferrario, L. Giannessi, C. R. Frascati, and C. Maroli, “One-Dimensional FEL Equations Without the Slowly Varying Envelope Approximation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB21, pp. 79-82.
[n] P. G. O, J. E. Dyson, R. G. Maggs, P. Schafstall, and T. J. Zaugg, “Variable Gradient Permanent-Magnet Quadrupole Lenses”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 354-357.
[n] A. Rhyder, G. R. Jackson, and A. Owen, “A software framework based on Qt for accessing EPICS data using Channel Access”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL002, pp. 30-32.
[n] J. Qiang et al., “Beam Dynamics Simulation of the Solenoid Sextupole Error in the LCLS-II Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4277-4280. doi:10.18429/JACoW-IPAC2018-THPMF085
[n] M. A. Leonova, “MICE Spectrometer Solenoid Magnetic Field Measurements”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO15, pp. 1337-1339.
[n] F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233.
[n] M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
[n] P. Dhara, P. Maity, A. Roy, P. S. Roy, and P. Singhai, “Design of the Data Acquisition System for the Nuclear Physics Experiments at VECC”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC01, pp. 268-270.
[n] J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
[n] E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251.
[n] F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841.
[n] J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
[n] R. A. Jameson, “High-Brightness H-Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 903-908.
[n] K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2839-2842.
[n] D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n] D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1156-1159. doi:10.18429/JACoW-IPAC2017-MOPVA128
[n] B. Rusnak et al., “Superconducting Multicell Cavity Development Program at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1021-1024.
[n] C. A. Thomas et al., “Design and Implementation of Non-Invasive Profile Monitors for the ESS LEBT”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 551-554. doi:10.18429/JACoW-IBIC2016-TUPG80
[n] J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
[n] M. E. Hamm and J. M. Potter, “An Inexpensive PC-Based Ion Linac Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1377-1380.
[n] T. Allison, J. Sage, M. Wissman, V. A. Lebedev, and C. Piller, “The CEBAF Beam Scraping Monitor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH130, pp. 2389-2391.
[n] R. I. Farnsworth, A. K. Grant, N. Hauser, and A. Rhyder, “Research Metadata Management at the Australian Synchrotron and ANSTO”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA03, pp. 121-123.
[n] P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
[n] Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2706-2709.
[n] K. Saadatmand et al., “Performance of the SSC Magnetron Ion Source and LEBTS”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-20, pp. 94-96.
[n] J. Breunlin et al., “Diagnostics at the Max IV 3 GeV Storage Ring During Commissioning”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-IBIC2016-MOAL02
[n] T.-S. F. Wang and J. T. Kwan, “A Study of Storage Ring Requirements for an Explosive Detection System Using NRA Method”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP022, pp. 1790-1792.
[n] S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “BUBBANET": A High Performance Network for the SSC Accelerator Control System"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1829-1832.
[n] B. T. Freemire et al., “High Pressure Gas-Filled RF Cavities for Use in a Muon Cooling Channel”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUODA1, pp. 419-421.
[n] Y. Hashimoto et al., “Development of a Nondestructive Beam Profile Monitor using a Sheeted Nitrogen-molecular Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE014, pp. 987-989.
[n] M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3094-3097.
[n] M. Knott, G. Gunderson, F. Lenkszus, and W. McDowell, “Control System Features of the Argonne 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2014-2017.
[n] H.-D. Gr?ñf et al., “Progress and Status of the S-DALINAC”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J09, pp. XX-XX.
[n] M. E. Castro Carballo, “Performance of the Fast Beam Conditions Monitor BCM1F in the CMS Experiment at the LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD83, pp. 239-241.
[n] W. J. Starling and T. Cain, “Superconducting Super Collider Laboratory Coupled-Cavity Linac Mechanical Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-69, pp. 241-243.
[n] S. Singh, J. A. Gore, S. Kulkarni, and P. Singh, “Control System for BARC-TIFR Pelletron”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCA04, pp. 251-253.
[n] R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847.
[n] H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
[n] K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1167-1169. doi:10.18429/JACoW-IPAC2017-MOPVA132
[n] G. Joshi, T. Ananthkrishnan, S. K. Bharade, P. M. Paresh, C. K. Pithawa, and C. I. Sujo, “RF Control System for 400 keV RFQ”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB03, pp. 260-262.
[n] K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
[n] H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n] R. J. Pasquinelli, “Twenty-five Years of Stochastic Cooling Experience at Fermilab”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO01, pp. 36-40.
[n] M. Canzari, M. Di Carlo, M. Dolci, and R. Smareglia, “Using AI in the Fault Management Predictive Model of the SKA TM Services: A Preliminary Study”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 435-438. doi:10.18429/JACoW-ICALEPCS2017-TUPHA030
[n] J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2132-2135.
[n] D. K. Liu and K. R. Ye, “Improvement of Beam Diagnosis”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-73, pp. 875-877.
[n] A. Buteau et al., “Future of Tango”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA01, pp. 723-727.
[n] L. R. Shen and D. K. Liu, “The SSRF Control System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB009, pp. 2704-2706.
[n] P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2241-2244. doi:10.18429/JACoW-IPAC2016-WEPMB056
[n] G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 797-800.
[n] R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
[n] A. Sharma et al., “Development of a Prototype Linear Induction Accelerator at BARC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99917, pp. XX-XX.
[n] V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
[n] D. A. Swenson, F. W. Guy, and W. J. Starling, “Commissioning the 2.5-MeV RFD Linac Prototype”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA63, pp. 3531-3533.
[n] A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 259. doi:10.18429/JACoW-MEDSI2020-WEPA14
[n] V. Poucki, T. Karcnik, P. L. Lemut, and M. O. Oblak, “Combating Multi-bunch Instabilities with the Libera Bunch-by-bunch Unit”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC084, pp. 1251-1253.
[n] T. Kroc, A. Moretti, and M. Popovic, “Fermilab Linac Upgrade - Module Conditioning Results”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-51, pp. 187-189.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Ghatak, A. S. Dhavale, N. Gupta, and K. C. Mittal, “A Kinetic Model of Multipaction for SRF Cavities for Accelerator Driven Sub-Critical System (ADSS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP090, pp. 1741-1743.
- H. Henke and O. Napoly, “Wake Fields Between Two Parallel Resistive Plates”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1046-1049.
- J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS26, pp. 1687-1690.
- S. K. Guharay, C. K. Allen, M. Reiser, C. R. Chang, and K. Saadatmand, “A Compact ESQ System for Transport and Focusing of H- Beam from Ion Source to RFQ”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-16, pp. 338-340.
- M. Fouaidy, A. Caruette, T. Junquera, and Q. S. Shu, “Surface Scanning Thermometers for Diagnostic Purpose of the TESLA SRF Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F06, pp. 559-563.
- N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687.
- P. Di Marcantonio, R. Cirami, B. Jeram, and G. Chiozzi, “Transmitting huge amounts of data design implementation and performance of the Bulk Data transfer mechanism in ACS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_032.
- E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3415-3417.
- Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR047, pp. 4080-4082.
- C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 503-506.
- A. Castilla, J. R. Delayen, V. S. Morozov, and T. Satogata, “Employing Twin Crabbing Cavities to Address Variable Transverse Coupling of Beams in the MEIC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 80-82.
- N. Holtkamp et al., “Longitudinal Beam Dynamics of the RWT-Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 676-679.
- V. Petrillo, M. Ferrario, L. Giannessi, C. R. Frascati, and C. Maroli, “One-Dimensional FEL Equations Without the Slowly Varying Envelope Approximation”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB21, pp. 79-82.
- P. G. O, J. E. Dyson, R. G. Maggs, P. Schafstall, and T. J. Zaugg, “Variable Gradient Permanent-Magnet Quadrupole Lenses”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 354-357.
- A. Rhyder, G. R. Jackson, and A. Owen, “A software framework based on Qt for accessing EPICS data using Channel Access”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL002, pp. 30-32.
- J. Qiang et al., “Beam Dynamics Simulation of the Solenoid Sextupole Error in the LCLS-II Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4277-4280.
- M. A. Leonova, “MICE Spectrometer Solenoid Magnetic Field Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO15, pp. 1337-1339.
- F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233.
- M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
- P. Dhara, P. Maity, A. Roy, P. S. Roy, and P. Singhai, “Design of the Data Acquisition System for the Nuclear Physics Experiments at VECC”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC01, pp. 268-270.
- J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
- E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251.
- F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841.
- J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
- R. A. Jameson, “High-Brightness H-Accelerators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 903-908.
- K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2839-2842.
- D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS38, pp. 2775-2778.
- D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1156-1159.
- B. Rusnak et al., “Superconducting Multicell Cavity Development Program at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1021-1024.
- C. A. Thomas et al., “Design and Implementation of Non-Invasive Profile Monitors for the ESS LEBT”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 551-554.
- J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
- M. E. Hamm and J. M. Potter, “An Inexpensive PC-Based Ion Linac Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1377-1380.
- T. Allison, J. Sage, M. Wissman, V. A. Lebedev, and C. Piller, “The CEBAF Beam Scraping Monitor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH130, pp. 2389-2391.
- R. I. Farnsworth, A. K. Grant, N. Hauser, and A. Rhyder, “Research Metadata Management at the Australian Synchrotron and ANSTO”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOAA03, pp. 121-123.
- P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
- Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2706-2709.
- K. Saadatmand et al., “Performance of the SSC Magnetron Ion Source and LEBTS”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-20, pp. 94-96.
- J. Breunlin et al., “Diagnostics at the Max IV 3 GeV Storage Ring During Commissioning”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- T.-S. F. Wang and J. T. Kwan, “A Study of Storage Ring Requirements for an Explosive Detection System Using NRA Method”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP022, pp. 1790-1792.
- S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “BUBBANET": A High Performance Network for the SSC Accelerator Control System"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1829-1832.
- B. T. Freemire et al., “High Pressure Gas-Filled RF Cavities for Use in a Muon Cooling Channel”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUODA1, pp. 419-421.
- Y. Hashimoto et al., “Development of a Nondestructive Beam Profile Monitor using a Sheeted Nitrogen-molecular Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE014, pp. 987-989.
- M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3094-3097.
- M. Knott, G. Gunderson, F. Lenkszus, and W. McDowell, “Control System Features of the Argonne 6 GeV Synchrotron Light Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2014-2017.
- H.-D. Gr?ñf et al., “Progress and Status of the S-DALINAC”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J09, pp. XX-XX.
- M. E. Castro Carballo, “Performance of the Fast Beam Conditions Monitor BCM1F in the CMS Experiment at the LHC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD83, pp. 239-241.
- W. J. Starling and T. Cain, “Superconducting Super Collider Laboratory Coupled-Cavity Linac Mechanical Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-69, pp. 241-243.
- S. Singh, J. A. Gore, S. Kulkarni, and P. Singh, “Control System for BARC-TIFR Pelletron”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCA04, pp. 251-253.
- R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847.
- H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
- K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1167-1169.
- G. Joshi, T. Ananthkrishnan, S. K. Bharade, P. M. Paresh, C. K. Pithawa, and C. I. Sujo, “RF Control System for 400 keV RFQ”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB03, pp. 260-262.
- K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
- H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1921-1923.
- R. J. Pasquinelli, “Twenty-five Years of Stochastic Cooling Experience at Fermilab”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO01, pp. 36-40.
- M. Canzari, M. Di Carlo, M. Dolci, and R. Smareglia, “Using AI in the Fault Management Predictive Model of the SKA TM Services: A Preliminary Study”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 435-438.
- J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2132-2135.
- D. K. Liu and K. R. Ye, “Improvement of Beam Diagnosis”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-73, pp. 875-877.
- A. Buteau et al., “Future of Tango”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPA01, pp. 723-727.
- L. R. Shen and D. K. Liu, “The SSRF Control System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB009, pp. 2704-2706.
- P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2241-2244.
- G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 797-800.
- R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 230-232.
- A. Sharma et al., “Development of a Prototype Linear Induction Accelerator at BARC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99917, pp. XX-XX.
- V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
- D. A. Swenson, F. W. Guy, and W. J. Starling, “Commissioning the 2.5-MeV RFD Linac Prototype”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA63, pp. 3531-3533.
- A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 259.
- V. Poucki, T. Karcnik, P. L. Lemut, and M. O. Oblak, “Combating Multi-bunch Instabilities with the Libera Bunch-by-bunch Unit”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC084, pp. 1251-1253.
- T. Kroc, A. Moretti, and M. Popovic, “Fermilab Linac Upgrade - Module Conditioning Results”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-51, pp. 187-189.
Back to search