JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Pira et al., “Impact of the Cu Substrate Surface Preparation on the Morphological, Superconductive and RF Properties of the Nb Superconductive Coatings”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 935-940. doi:10.18429/JACoW-SRF2019-THP041
[n]	S. V. Benson, D. Douglas, G. Neil, M. D. Shinn, and G. P. Williams, “A Synchronized FIR/VUV Light Source at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP086, pp. 1789-1791. 
[n]	D. Bolkhovityanov and P. B. Cheblakov, “PCI Hardware Support in LIA-2 Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN017, pp. 916-918. 
[n]	S. Zhang, S. V. Benson, J. G. Gubeli, G. Neil, and F. G. Wilson, “Investigation and Evaluation on Pulse Stackers for Temporal Shaping of Laser Pulses”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB03, pp. 394-397. 
[n]	H. Nakayama et al., “Beam Background and MDI Design for SuperKEKB/Belle-II”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR007, pp. 1825-1827. 
[n]	T. V. Salikova, M. Petrichenkov, A. V. Repkov, O. A. Shevchenko, and N. Vinokurov, “Radiation Monitoring at Novosibirsk FEL”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS13, pp. 106-107. 
[n]	J. Gr??nert, J. Buck, F. Dietrich, W. Freund, A. Koch, and M. Planas, “Implementation Phase of the European XFEL Photon Diagnostics”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP012, pp. 41-44. 
[n]	M. Yoshimoto et al., “Development of the Beam Halo Monitor in the J-PARC 3-GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOAA03, pp. 2122-2124. 
[n]	U. Wienands et al., “A Transverse Beam Instability in the PEP-II HER Induced by Discharges in the Vacuum System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS068, pp. 1811-1813. 
[n]	Y. Taira, H. Toyokawa, M. Adachi, M. Katoh, S. Tanaka, and N. Yamamoto, “Feasibility Study Gamma-induced Positron Annihilation Lifetime Spectroscopy in an Electron Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR057, pp. 4103-4105. 
[n]	R. Tanaka et al., “JAERI AVF Cyclotron for Research of Advanced Radiation Technology”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-03, pp. 566-569. 
[n]	J. Gr??nert, “Photon Diagnostics Requirements and Challenges at the European XFEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC56, pp. 146-148. 
[n]	Y. Otake et al., “Commissioning and Performance of the Beam Monitor System for XFEL/SPring-8 ``SACLA''”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOOCB02, pp. 47-49. 
[n]	J. Bisognano et al., “A Beauty Factory Using an SRF Linac and a Storage Ring”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-23, pp. 586-588. 
[n]	J. Crisp et al., “A Programmable High-Power Beam Damper for the Tevatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2147-2150. 
[n]	J. Keil, O. Kaul, E. Negodin, and R. Neumann, “Design of a Local IP Orbit Feedback at HERA-e”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH086, pp. 2988-2990. 
[n]	L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490. 
[n]	A. V. Aleksandrov, S. M. Cousineau, A. P. Zhukov, and B. L. Cathey, “6D Beam Measurement, Challenges and Possibilities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2890-2895. doi:10.18429/JACoW-IPAC2018-THXGBE1
[n]	T. A. Pelaia II et al., “Open XAL Status Report 2015”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1270-1272. doi:10.18429/JACoW-IPAC2015-MOPWI050
[n]	M. Pokorny et al., “Distributed Control System for the Test Interferometer of the ALMA Project”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT004, pp. XX-XX. 
[n]	S. Zhang, D. Hardy, G. Neil, and M. D. Shinn, “Characterization and Performance of a High-Power Solid-State Laser for a High-Current Photocathode Injector”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP059, pp. XX-XX. 
[n]	A. P. Shishlo, A. V. Aleksandrov, A. P. Zhukov, and Y. Liu, “Model Based Optics Studies in the MEBT Section of SNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 814-816. doi:10.18429/JACoW-IPAC2017-MOPIK118
[n]	R. Hutcheon and G. McMichael, “Low Power RF Tuning of the RFQ1 Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-21, pp. 94-96. 
[n]	H. Freund, “Time-Dependent Simulation of Free-Electron Laser Amplifiers and Oscillators”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP027, pp. XX-XX. 
[n]	S. B. Leith et al., “The Development of HiPIMS Multilayer SIS Film Coatings on Copper for SRF Applications”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 86. doi:10.18429/JACoW-SRF2021-SUPFDV012
[n]	G. Arbique, B. Chidley, G. McMichael, and J. Sheikh, “CW Operation and Initial Beam Experiments with the RFQ1 Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-20, pp. 91-93. 
[n]	T. Taniuchi et al., “Vacuum Waveguide System for SPring-8 Linac Injector Section”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3863-3865. doi:10.18429/JACoW-IPAC2014-THPRI044
[n]	S. B. Leith, B. Bai, X. Jiang, M. Vogel, R. Ries, and E. Seiler, “HiPIMS NbN Thin Film Development for Use in Multilayer SIS Films”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 91. doi:10.18429/JACoW-SRF2021-SUPFDV013
[n]	K. Gubin et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Present Status”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA122, pp. 274-276. 
[n]	S. Koscielniak and K. Zeno, “Adiabatic capture of longitudinal phase space”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3387-3390. doi:10.18429/JACoW-IPAC2023-WEPL118
[n]	J. Prenting et al., “High Precision Survey and Alignment of Large Linear Accelerators”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP38, pp. 690-692. 
[n]	G. Cheng et al., “RF-Thermal-Structural Analysis of a Waveguide Higher Order Mode Absorber”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS075, pp. 605-607. 
[n]	W. C. Nunnally, “Accelerator Power Concepts Using Isolated Transmission Lines”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3105-3108. 
[n]	M. Yakopov et al., “Upgrade of the European XFEL Phase Shifters”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1479. doi:10.18429/JACoW-ICALEPCS2019-WEPHA165
[n]	Z. Huang, “Recent Progress in High-Gain FEL Theory”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOC001, pp. XX-XX. 
[n]	E. Acerbi, S. Ceresara, R. Garre, L. Rossi, and G. Volpini, “Italian Development of a Superconducting Cable for the Main Dipoles of the Large Hadron Collider”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1417-1420. 
[n]	C. Liu et al., “Fixed Target Operation at RHIC in 2019”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 542-544. doi:10.18429/JACoW-NAPAC2019-TUPLO05
[n]	C. P. Welsch, E. Bravin, B. Burel, T. Chapman, T. Lefevre, and M. J. Pilon, “High Dynamic Range Beam Profile Measurements”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH088, pp. 1217-1219. 
[n]	K. Hock et al., “Luminosity maximization in a small vertex region at RHIC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 44-47. doi:10.18429/JACoW-IPAC2024-MOPC06
[n]	M. Calvi et al., “Summary of the U15 Prototype Magnetic Performance”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP041, pp. 111-115. 
[n]	G. Favero et al., “Predictive capabilities in CFD simulations of additively manufactured extraction grid cooling channels for the DTT NBI system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4939-4942. doi:10.18429/JACoW-IPAC2023-THPM022
[n]	K. Popov, A. Aryshev, and N. Terunuma, “Electron beam and laser-Compton X-ray parameters stabilization simulation study at KEK Laser-Undulator Compact X-ray facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB062, unpublished. 
[n]	N. C. Bhattacharya, J. A. Nolen, and S. Tanaka, “Design, Fabrication and Testing of a Nested Pair of ''cos theta; Dipole'' X-Y Steering Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-03, pp. 471-473. 
[n]	C. Hernandez-Garcia et al., “A High Average Current DC GaAs Photocathode Gun for ERLs and FELs”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP050, pp. 3117-3119. 
[n]	K. Gubin et al., “Tests of High Temperature Intense Neutron Target Prototype.”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBZ03, pp. XX-XX. 
[n]	C. H. G. Hernandez-Garcia et al., “Longitudinal Space Charge Effects in the JLAB IR FEL SRF Linac”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUBOS02, pp. XX-XX. 
[n]	R. Valizadeh and C. Benjamin, “Ultra-thin film yttria enhanced gold photocathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 883-885. doi:10.18429/JACoW-IPAC2023-MOPL147
[n]	A. Pepato et al., “Implementation of the Additive Manufacturing for metals approach: the production of the acceleration grids for DTT NBI project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2230-2233. doi:10.18429/JACoW-IPAC2023-TUPM018
[n]	S. Karabekyan et al., “Status update of the SASE3 variable polarization project at the European XFEL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 364-367. doi:10.18429/JACoW-IPAC2024-MOPG30
[n]	B. L. Cathey, A. V. Aleksandrov, S. M. Cousineau, and A. P. Zhukov, “Technical Workings of the 6D Phase Measurement at SNS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1107-1109. doi:10.18429/JACoW-IPAC2018-TUPAL044
[n]	K. Popov, A. Aryshev, J. Urakawa, and N. Terunuma, “KEK LUCX facility new FPGA based LLRF phase and amplitude feedback performance report”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA112, unpublished. 
[n]	H. Santos et al., “Control and Analysis Software Development at the European XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 157. doi:10.18429/JACoW-ICALEPCS2019-MOMPR004
[n]	S. Candela et al., “Laser powder bed fusion of pure niobium for particle accelerator applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4935-4938. doi:10.18429/JACoW-IPAC2023-THPM021
[n]	K. Togawa et al., “A Soft X-Ray Free-Electron Laser Beamline of SACLA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1209-1212. doi:10.18429/JACoW-IPAC2017-TUOAA2
[n]	C. Benjamin et al., “Deposition and Characterisation of V₃Si films for SRF Applications”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 84-87. doi:10.18429/JACoW-SRF2023-MOPMB011
[n]	A. Silenzi et al., “Remote User Operation with Karabo at the European XFEL”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper TUPV044, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search