Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] J. C. Herrera and M. Month, “Investigation of Gradient Corrections for the AGS”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 187-192.
[n] J. P. Blewett et al., “Injection into the ISA”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 816-819.
[n] F. Zhou et al., “First Commissioning of LCLS-II CW Injector Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2171-2173. doi:10.18429/JACoW-IPAC2019-TUPTS106
[n] C. H. Kuo, W. K. Lau, M. S. Yeh, K. H. Hu, and K. T. Hsu, “Integrated Software Environment of Longitudinal Feedback System for TLS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA35, pp. 1153-1155.
[n] T. O. Raubenheimer, “Awards Session Welcome”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THAHC0, unpublished.
[n] Y. S. Cho, B. H. Choi, J. H. Ha, J. H. Lee, J. S. Lee, and S. J. Lim, “Polymer?s Surface Resistivity Improvement using by Ion Implantation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A11, pp. 2577-2579.
[n] A. Pei et al., “Longitudinal Multibunch Feedback Experiment with Switched Filter Bank”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC12, pp. 3094-3096.
[n] A. Fiebig and S. Luegert, “A Radiofrequency Pulse Compressor for Square Output Pulses in the Microsecond Range”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1240-1242.
[n] G. Doucas, M. Dumitru, M. F. Kimmitt, T. Kormann, G. Korschinek, and C. Stan-Sion, “A Photoelectron Source for the Study of Smith-Purcell Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP140G, pp. 748-752.
[n] A. D. Kovalenko et al., “Superconducting Magnets for the NICA Facility at JINR: Status of the Design and Construction Plans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB040, pp. 361-363.
[n] B. Podobedov, “Beam Dynamics Measurements with New Generation BPMs”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEXBA1, unpublished.
[n] K. R. Kim, C.-Y. Lee, J. S. Lee, and B.-S. Park, “Design of the 20 MeV User Facilities of Proton Engineering Frontier Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH189, pp. 2376-2378.
[n] G. Ferrand et al., “Simulation of RF components for the ICONE pilot: RFQ, rebuncher, DTL cavities and amplifiers”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1506-1509. doi:10.18429/JACoW-IPAC2025-TUPS037
[n] G. Wuestefeld, M. Abo-Bakr, J. Feikes, K. Holldack, U. Schade, and H. W. H??bers, “Powerful, Steady State, Coherent Synchrotron Radiation at BESSY II”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI023, pp. 778-780.
[n] W. H. Syed, A. Bellandi, J. Branlard, and A. Eichler, “Identification of the Mechanical Dynamics of the Superconducting Radio-Frequency Cavities for the European XFEL CW Upgrade”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 76-79. doi:10.18429/JACoW-LINAC2022-MOPOPA02
[n] J. C. T. Thangaraj, “Accelerator Research and Technology Developments for Industrial Applications”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEZBB1, unpublished.
[n] M. Koopmans, J.-G. Hwang, A. Jankowiak, M. Ries, G. Schiwietz, and A. Sch?ñlicke, “Statistical Analysis of 2D Single-Shot PPRE Bunch Measurements”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 939-942. doi:10.18429/JACoW-IPAC2021-MOPAB296
[n] S. M. Lidia, “Commissioning of the FRIB Beam Instrumentation”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THZBB1, unpublished.
[n] M. S. Yeh, K. T. Hsu, C. H. Kuo, W. K. Lau, J. F. Lee, and H. J. Tsai, “High Speed Digital Signal Processing Electronics for the TLS Longitudinal Feedback System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA38, pp. 1162-1164.
[n] K. L. Ray et al., “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1609-1611. doi:10.18429/JACoW-IPAC2017-TUPAB124
[n] P. Manini, F. Belloni, M. Marino, and M. Porro, “High Capacity Getter Pump for UHV Operation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3839-3842.
[n] A. A. Kalamaiko, K. Aulenbacher, M. A. Dehn, S. Friederich, and C. P. Stoll, “High Bunch Charges in the Second Injection Beamline of MESA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2574-2576. doi:10.18429/JACoW-IPAC2022-THPOPT007
[n] J. S. Lee and C.-Y. Lee, “The Design and Manufacture of a 300 keV Heavy Ion Implanter for Surface Modification of Materials”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH191, pp. 2382-2384.
[n] B. S. Kim, K. R. Kim, J. S. Lee, and S.-Y. Lee, “Enhancement of Mechanical Properties of High Chromium Steel by Nitrogen Ion Implantation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH183, pp. 2361-2363.
[n] R. C. Peacock et al., “Pulsed DC High Field Measurements of Irradiated and Non-Irradiated Electrodes of Different Materials”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 441-444. doi:10.18429/JACoW-LINAC2022-TUPOPA13
[n] T. Hellert, A. Hessler, E. Lam, F. Sannibale, and M. Dach, “Augmented reality for accelerator operations: A virtual control room prototype”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1801-1804. doi:10.18429/JACoW-ICALEPCS2025-THPD089
[n] W. K. Lau et al., “Progress of the Longitudinal Feedback System and Associated Beam Observations in TLS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA37, pp. 1159-1161.
[n] C. C. Wilcox, W. A. Frank, A. Pertica, and R. E. Williamson, “Studies of the Time Structure of Ionisation Beam Profile Measurements in the ISIS Extracted Proton Beamline”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 412-416. doi:10.18429/JACoW-IBIC2019-TUPP037
[n] Y. Noh, B. Y. Kim, K. R. Kim, and J. S. Lee, “Mechanical Properties of WC-Co by Nitrogen Ion Implantation: Improvement of Industrial Tools”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH184, pp. 2364-2366.
[n] H. Imao, “Nitrogen Gas-Jet Curtain for Windowless Helium Gas Cell Equipped With Differential Pumping Systems”, presented at the LINAC'22, Liverpool, UK, Aug.-Sep. 2022, paper TH1AA01, unpublished.
[n] T. J. Overton, T. H. Pacey, Y. M. Saveliev, and G. X. Xia, “Beam Dynamics and Drive Beam Losses Within a Planar Dielectric Wakefield Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 641-644. doi:10.18429/JACoW-IPAC2022-MOPOMS010
[n] F. Sannibale et al., “Higher Fields and Beam Energies in Continuous-Wave Room-Temperature VHF RF Guns”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 401-403. doi:10.18429/JACoW-FEL2017-WEA05
[n] T. G. Hallilingaiah, A. Arnold, S. Köppen, P. Michel, and U. van Rienen, “Fabrication, Field Measurement, and Testing of a Compact RF Deflecting Cavity for ELBE”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 271-274. doi:10.18429/JACoW-LINAC2022-MOPORI20
[n] J. Wood et al., “Density downramp injection into a discharge-based plasma acceleration stage”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3041, unpublished.
[n] R. Li et al., “Enhanced harmonic stability in magnet resonant power supplies via multi-harmonic closed-loop control and current feedforward”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS07, unpublished.
[n] M. A. Dehn, K. Aulenbacher, and P. S. Plattner, “MIST - The MESA-Injector Source Two”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2624-2626. doi:10.18429/JACoW-IPAC2022-THPOPT024
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Herrera and M. Month, “Investigation of Gradient Corrections for the AGS”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 187-192.
- J. P. Blewett et al., “Injection into the ISA”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 816-819.
- F. Zhou et al., “First Commissioning of LCLS-II CW Injector Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2171-2173.
- C. H. Kuo, W. K. Lau, M. S. Yeh, K. H. Hu, and K. T. Hsu, “Integrated Software Environment of Longitudinal Feedback System for TLS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA35, pp. 1153-1155.
- T. O. Raubenheimer, “Awards Session Welcome”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THAHC0, unpublished.
- Y. S. Cho, B. H. Choi, J. H. Ha, J. H. Lee, J. S. Lee, and S. J. Lim, “Polymer?s Surface Resistivity Improvement using by Ion Implantation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A11, pp. 2577-2579.
- A. Pei et al., “Longitudinal Multibunch Feedback Experiment with Switched Filter Bank”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC12, pp. 3094-3096.
- A. Fiebig and S. Luegert, “A Radiofrequency Pulse Compressor for Square Output Pulses in the Microsecond Range”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1240-1242.
- G. Doucas, M. Dumitru, M. F. Kimmitt, T. Kormann, G. Korschinek, and C. Stan-Sion, “A Photoelectron Source for the Study of Smith-Purcell Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP140G, pp. 748-752.
- A. D. Kovalenko et al., “Superconducting Magnets for the NICA Facility at JINR: Status of the Design and Construction Plans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB040, pp. 361-363.
- B. Podobedov, “Beam Dynamics Measurements with New Generation BPMs”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEXBA1, unpublished.
- K. R. Kim, C.-Y. Lee, J. S. Lee, and B.-S. Park, “Design of the 20 MeV User Facilities of Proton Engineering Frontier Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH189, pp. 2376-2378.
- G. Ferrand et al., “Simulation of RF components for the ICONE pilot: RFQ, rebuncher, DTL cavities and amplifiers”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS037, pp. 1506-1509.
- G. Wuestefeld, M. Abo-Bakr, J. Feikes, K. Holldack, U. Schade, and H. W. H??bers, “Powerful, Steady State, Coherent Synchrotron Radiation at BESSY II”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI023, pp. 778-780.
- W. H. Syed, A. Bellandi, J. Branlard, and A. Eichler, “Identification of the Mechanical Dynamics of the Superconducting Radio-Frequency Cavities for the European XFEL CW Upgrade”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 76-79.
- J. C. T. Thangaraj, “Accelerator Research and Technology Developments for Industrial Applications”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEZBB1, unpublished.
- M. Koopmans, J.-G. Hwang, A. Jankowiak, M. Ries, G. Schiwietz, and A. Sch?ñlicke, “Statistical Analysis of 2D Single-Shot PPRE Bunch Measurements”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 939-942.
- S. M. Lidia, “Commissioning of the FRIB Beam Instrumentation”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THZBB1, unpublished.
- M. S. Yeh, K. T. Hsu, C. H. Kuo, W. K. Lau, J. F. Lee, and H. J. Tsai, “High Speed Digital Signal Processing Electronics for the TLS Longitudinal Feedback System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA38, pp. 1162-1164.
- K. L. Ray et al., “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1609-1611.
- P. Manini, F. Belloni, M. Marino, and M. Porro, “High Capacity Getter Pump for UHV Operation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3839-3842.
- A. A. Kalamaiko, K. Aulenbacher, M. A. Dehn, S. Friederich, and C. P. Stoll, “High Bunch Charges in the Second Injection Beamline of MESA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2574-2576.
- J. S. Lee and C.-Y. Lee, “The Design and Manufacture of a 300 keV Heavy Ion Implanter for Surface Modification of Materials”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH191, pp. 2382-2384.
- B. S. Kim, K. R. Kim, J. S. Lee, and S.-Y. Lee, “Enhancement of Mechanical Properties of High Chromium Steel by Nitrogen Ion Implantation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH183, pp. 2361-2363.
- R. C. Peacock et al., “Pulsed DC High Field Measurements of Irradiated and Non-Irradiated Electrodes of Different Materials”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 441-444.
- T. Hellert, A. Hessler, E. Lam, F. Sannibale, and M. Dach, “Augmented reality for accelerator operations: A virtual control room prototype”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1801-1804.
- W. K. Lau et al., “Progress of the Longitudinal Feedback System and Associated Beam Observations in TLS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA37, pp. 1159-1161.
- C. C. Wilcox, W. A. Frank, A. Pertica, and R. E. Williamson, “Studies of the Time Structure of Ionisation Beam Profile Measurements in the ISIS Extracted Proton Beamline”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 412-416.
- Y. Noh, B. Y. Kim, K. R. Kim, and J. S. Lee, “Mechanical Properties of WC-Co by Nitrogen Ion Implantation: Improvement of Industrial Tools”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH184, pp. 2364-2366.
- H. Imao, “Nitrogen Gas-Jet Curtain for Windowless Helium Gas Cell Equipped With Differential Pumping Systems”, presented at the 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, paper TH1AA01, unpublished.
- T. J. Overton, T. H. Pacey, Y. M. Saveliev, and G. X. Xia, “Beam Dynamics and Drive Beam Losses Within a Planar Dielectric Wakefield Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 641-644.
- F. Sannibale et al., “Higher Fields and Beam Energies in Continuous-Wave Room-Temperature VHF RF Guns”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 401-403.
- T. G. Hallilingaiah, A. Arnold, S. Köppen, P. Michel, and U. van Rienen, “Fabrication, Field Measurement, and Testing of a Compact RF Deflecting Cavity for ELBE”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 271-274.
- J. Wood et al., “Density downramp injection into a discharge-based plasma acceleration stage”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3041, this conference.
- R. Li et al., “Enhanced harmonic stability in magnet resonant power supplies via multi-harmonic closed-loop control and current feedforward”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS07, unpublished.
- M. A. Dehn, K. Aulenbacher, and P. S. Plattner, “MIST - The MESA-Injector Source Two”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2624-2626.
Back to search