Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543.
[n] L. Moseiko, N. Moseiko, and A. Shirokov, “INTELLECTUAL CRATE-CONTROLLER K167”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH07, pp. XX-XX.
[n] K. Cornelis, L. Evans, A. Faugier, A. Hilaire, and R. Schmidt, “Operation of the SPPS Separation Scheme”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 133-136.
[n] R. Dawson, K. Erdman, B. Milton, and N. Stevenson, “Operation of the TR30 Industrial" Cyclotron"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1733-1735.
[n] M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478.
[n] M. van Rooij et al., “The Vacuum Upgrade of the CERN PS and PS Booster”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP15, pp. 2069-2071.
[n] N. van Gils et al., “Electron beam scattering in rubidium vapour at AWAKE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS010, unpublished.
[n] C. R. Prokop, P. Piot, M. D. Church, and Y.-E. Sun, “Longitudinal Phase Space Measurement for the Advanced Superconducting Test Accelerator Photoinjector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR034, pp. 3009-3011.
[n] W. Busse, “Advantages and Constraints of Modern Accelerator Control Systems”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FI-02, pp. 555-558.
[n] T. Ilg, D. Liska, P. Smith, L. Carlisle, S. Ellis, and G. McCauley, “Special Design Problems and Solutions for High Powered Continuous Duty Linacs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1718-1721.
[n] V. Vlachodimitropoulos, M. J. Barnes, and A. Chmielinska, “Preliminary Results from Validation Measurements of the Longitudinal Power Deposition Model for the LHC Injection Kicker Magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2636-2639. doi:10.18429/JACoW-IPAC2018-WEPMK005
[n] B. Breitkreutz, R. Greven, N. Shurkhno, R. Stassen, and H. Stockhorst, “Stochastic Cooling Hardware for Low Energy Deuterons at COSY”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2261-2263. doi:10.18429/JACoW-IPAC2017-TUPVA080
[n] K. Fukami et al., “Ejected Beam Emittance of the SPring-8 Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI114, pp. 1888-1890.
[n] W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2424-2427.
[n] D. Fernandez-Ca?âoto, F. J. Bermejo, I. Bustinduy, J. Feuchtwanger, J. L. Munoz, and D. de Cos, “Electrode Design of the ESS-Bilbao Accelerator Proton Extraction System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD37, pp. 144-148.
[n] C. S. Hopper, J. R. Delayen, and R. G. Olave, “Superconducting Single-spoke Cavities for High-velocity Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO079, pp. 2480-2482.
[n] R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2734-2736. doi:10.18429/JACoW-IPAC2014-WEPRI101
[n] F. J. Deadrick, J. J. Barnard, T. J. Fessenden, J. W. Meredith, and J. Rintamaki, “Development of Beam Position Monitors for Heavy Ion Recirculators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB14, pp. 2557-2559.
[n] R. W. Carey et al., “Status of the use of Large-Scale CORBA Distributed Software Framework for NIF Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O2_001.
[n] T. Kanayawa, S. Koseki, H. Kubo, and M. Kumada, “High Performance Active Filter for the Power Supply of the HIMAC Synchrotron Magnet”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP100G, pp. 2358-2360.
[n] R. B. Appleby et al., “Low Energy Beam Tracking Under Scattering for a Cold Electron Source in Manchester”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2615-2617. doi:10.18429/JACoW-IPAC2015-WEPWA049
[n] G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1321-1324.
[n] P. Plascjak et al., “The Operational Status of the National Institutes of Health Cyclotron Complex”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-25, pp. 685-688.
[n] B. N. Kosciuk, A. Blednykh, and S. Seletskiy, “Construction and Operational Performance of a Horizontally Adjustable Beam Profile Monitor at NSLS-II”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF07, pp. 55-58.
[n] R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 8-11. doi:10.18429/JACoW-MEDSI2016-MOPE02
[n] S. Herb and J. Kirchgessner, “Operation of CESR with Permanent Magnet Interactioin Region Quadrupoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 130-133.
[n] B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1549-1552.
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Minimization of Emittance at the Cornell Electron Storage Ring With Sloppy Models”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 402-404. doi:10.18429/JACoW-NAPAC2016-TUPOA58
[n] S. Eylon et al., “Initial Commissioning Results of the RTA Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA3, pp. 3390-3392.
[n] G. Atoian, A. Zelenski, A. Bogdanov, M. F. Runtso, and E. J. Stephenson, “Precision, Absolute Proton Beam Polarization Measurements at 200 MeV Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP190, pp. 444-446.
[n] F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-01, pp. 268-277.
[n] F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
[n] K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446.
[n] S. S. Cao, J. Chen, L. W. Lai, Y. B. Leng, and N. Zhang, “Beam Arrival Time Analisis Based on CBPM at DCLS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4023-4025. doi:10.18429/JACoW-IPAC2017-THPAB128
[n] M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, and J. Rossbach, “Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2818-2821. doi:10.18429/JACoW-IPAC2015-WEPMA029
[n] S. Sytova, “VOLC: Volume Free Electron Laser Simulation Code”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH003, pp. 14-17.
[n] P. R. Cameron, M. C. Grau, M. Morvillo, T. J. Shea, and R. E. Sikora, “RHIC Beam Position Monitor Characterization”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ05, pp. 2458-2460.
[n] C. P. Manin, E. J. Bond, A. D. Casey, R. D. Clark, and G. W. Norman, “Streamlining the Target Fabrication Request at the National Ignition Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 176-179. doi:10.18429/JACoW-ICALEPCS2017-TUBPL04
[n] C. Boyer et al., “Thirty Meter Telescope Adaptive Optics Computing Challenges”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MODAULT01, pp. 36-39.
[n] S. Schulz et al., “Few-Femtosecond Facility-Wide Synchronization of the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 318-321. doi:10.18429/JACoW-FEL2019-WEB04
[n] R. J. Ducar, T. M. Tomasko, and L. A. Winterowd, “A CAMAC Based High-Resolution Repetitive Waveform Generator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4149-4152.
[n] K. Kostro, R. Billen, and C. Roderick, “On-change Publishing of Database Resident Control System Data”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP013, pp. 120-122.
[n] J. Cherix, M. Maerki, H. R. Fitze, H. Frei, and P. K. Sigg, “Development of High Power Gridded Tube CW RF Systems with Excellent Reliability and Maintainability”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAL2, pp. 418-422.
[n] T. D. Cassidy, A. J. Gorka, and R. B. Wehrle, “Insertion and Extraction of Internal Targetry at the Zero Gradient Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 640-642.
[n] K. G. Batrakov and S. Sytova, “Generation Regimes of FEL With Volume Distributed Feedback”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH005, pp. 41-44.
[n] S. Wang, M. D. Cropper, O. B. Malyshev, E. A. Seddon, and R. Valizadeh, “The Secondary Electron Yield from Transition Metals”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2403-2405. doi:10.18429/JACoW-IPAC2014-WEPME057
[n] D. E. Suddeth, “Air-Filled Ion Chamber Beam Loss Monitors for the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 602-605.
[n] D. Boutin et al., “Residual Orbit Correction Studies for the FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3332-3334. doi:10.18429/JACoW-IPAC2016-THPMB042
[n] K. Vodopivec and B. Vacaliuc, “High Throughput Data Acquisition with EPICS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 213-217. doi:10.18429/JACoW-ICALEPCS2017-TUBPA05
[n] J. M. Bogaty and A. V. Rauchas, “Computerized Measurement of Injection Tunes at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1765-1768.
[n] G. R. Swain, R. A. Jameson, R. A. Kandarian, D. J. Liska, E. R. Martin, and J. M. Potter, “Cavity Tuning for the LAMPF 805 MHz Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I05, pp. 242-249.
[n] G. Yadav et al., “Simulation Study for an Inverse Designed Narrowband THz Radiator for Ultrarelativistic Electrons”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 973-975. doi:10.18429/JACoW-IPAC2022-TUPOST049
[n] A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
[n] S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097.
[n] R. J. Ducar, “A Control System for the Fermilab Master-Slave Servo Manipulator”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1751-1754.
[n] W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1057-1062.
[n] M. J. Henderson et al., “Machine Learning Based Sample Alignment at TOPAZ”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 851-855. doi:10.18429/JACoW-ICALEPCS2023-TUPDP116
[n] S. A. Cherenshchikov, A. N. Dovbnya, and A. N. Opanasenko, “Secondary Emission in Cold-Cathode Magnetron Injection Gun”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA16, pp. 939-941.
[n] Z. T. Zhao, H. Ding, and H. Xu, “Commissioning Status of the Shanghai Synchrotron Radiation Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOAM01, pp. 998-1000.
[n] Y. Kurihara et al., “Development of Polarized Electron Source Using GaAs-AlGaAs Superlattice”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH423, pp. 647-649.
[n] S. Pfeiffer et al., “Status Update of the Fast Energy Corrector Cavity at FLASH”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 112-114. doi:10.18429/JACoW-LINAC2018-MOPO039
[n] L. R. Ives et al., “200 kW CW, 350 MHz Multiple Beam Inductive Output Tube”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO08, pp. 946-947.
[n] Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP024, unpublished.
[n] M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n] Y. V. Krylov, E. V. Kaportsev, K. Moseev, N. I. Moseiko, and A. G. Valentinov, “The Automation of Energy Ramping for the Main Storage Ring of KSRS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 597-599. doi:10.18429/JACoW-RUPAC2016-THPSC026
[n] M. P. Pretelli, F. Burini, G. T. Taddia, S. M. Tenconi, A. Lampasi, and P. Zito, “Switching Network Units for High Currents and Voltages or Plasma Applications”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 603-605. doi:10.18429/JACoW-RUPAC2016-THPSC028
[n] K. C. D. Chan et al., “Commissioning Plan for a High-Current Proton Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W017, pp. 1150-1152.
[n] D. Bullard et al., “Modification of the CEBAF Transport Dipoles for Energy Upgrade Considerations”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP146, pp. 3309-3311.
[n] J. Chen, L. Lai, L. Yu, R. Yuan, and S. Cao, “Development and performance evaluation of the Cavity BPM system for SHINE”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG79, unpublished.
[n] L. S. Walling, P. Allison, and A. H. Shapiro, “Transverse Coupling Impedance Measurement Studies of Low-Q Cavities”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH442, pp. 704-706.
[n] E. J. Divall et al., “Grid-enabling the Astra Gemini Laser Data”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP015, pp. 435-437.
[n] Z. Zhao, S. Liu, and C. H. Wang, “BEPCII EPICS Data Archiving and Retrieving System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP002, pp. 411-413.
[n] J.-M. Christmann et al., “Findings of simulation studies for the fast corrector magnets of PETRA IV”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1544-1547. doi:10.18429/JACoW-IPAC2024-TUPR53
[n] A. Tauschwitz et al., “Experimental Investigations of Plasma Lens Focusing and Plasma Channel Transport of Heavy Ion Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ04, pp. 1852-1854.
[n] R. Benaroya, T. H. Blewitt, J. M. Brooks, and C. Laverick, “Effect of Fast Neutron Irradiation at Low Temperature on NbZr Coil Performance”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 383-386.
[n] Ms. Yao, Z. Ni, and X. Zhou, “Development of Computer Centralized Control System for Large- Scale Equipment”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper MOPV008, unpublished.
[n] C. Bieth, J. M. Baze, G. Dugay, A. Joubert, and C. Pagani, “GANIL RF Systems”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4117-4120.
[n] J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509.
[n] S. Zhou, “A 90 MeV Electron Linac of IHEP”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-28, pp. 505-507.
[n] J. Brown, A. Sukhanov, D. Passarelli, G. Romanov, and T. Xu, “Simulations of field emitters and multipacting in PIP-II Single Spoke Resonator Type-2”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 345-347. doi:10.18429/JACoW-LINAC2024-TUPB010
[n] J. Bosser et al., “LHC Beam Instrumentation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAR3, pp. 465-467.
[n] D. Gavela et al., “Fabrication and Tests of a RF Cavity for a Novel Compact Superconducting Cyclotron for Radioisotope Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4585-4587. doi:10.18429/JACoW-IPAC2017-THPVA062
[n] S. G. Schubert et al., “CsK2Sb Growth Studies: Towards High Quantum Efficiency and Smooth Surfaces”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2566-2568. doi:10.18429/JACoW-IPAC2015-WEPWA032
For LaTeX
Use Complete Form
For BibTeX
References
- P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543.
- L. Moseiko, N. Moseiko, and A. Shirokov, “INTELLECTUAL CRATE-CONTROLLER K167”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH07, pp. XX-XX.
- K. Cornelis, L. Evans, A. Faugier, A. Hilaire, and R. Schmidt, “Operation of the SPPS Separation Scheme”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 133-136.
- R. Dawson, K. Erdman, B. Milton, and N. Stevenson, “Operation of the TR30 Industrial" Cyclotron"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1733-1735.
- M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478.
- M. van Rooij et al., “The Vacuum Upgrade of the CERN PS and PS Booster”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP15, pp. 2069-2071.
- N. van Gils et al., “Electron beam scattering in rubidium vapour at AWAKE”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS010, this conference.
- C. R. Prokop, P. Piot, M. D. Church, and Y.-E. Sun, “Longitudinal Phase Space Measurement for the Advanced Superconducting Test Accelerator Photoinjector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR034, pp. 3009-3011.
- W. Busse, “Advantages and Constraints of Modern Accelerator Control Systems”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FI-02, pp. 555-558.
- T. Ilg, D. Liska, P. Smith, L. Carlisle, S. Ellis, and G. McCauley, “Special Design Problems and Solutions for High Powered Continuous Duty Linacs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1718-1721.
- V. Vlachodimitropoulos, M. J. Barnes, and A. Chmielinska, “Preliminary Results from Validation Measurements of the Longitudinal Power Deposition Model for the LHC Injection Kicker Magnet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2636-2639.
- B. Breitkreutz, R. Greven, N. Shurkhno, R. Stassen, and H. Stockhorst, “Stochastic Cooling Hardware for Low Energy Deuterons at COSY”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2261-2263.
- K. Fukami et al., “Ejected Beam Emittance of the SPring-8 Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI114, pp. 1888-1890.
- W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2424-2427.
- D. Fernandez-Ca?âoto, F. J. Bermejo, I. Bustinduy, J. Feuchtwanger, J. L. Munoz, and D. de Cos, “Electrode Design of the ESS-Bilbao Accelerator Proton Extraction System”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD37, pp. 144-148.
- C. S. Hopper, J. R. Delayen, and R. G. Olave, “Superconducting Single-spoke Cavities for High-velocity Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO079, pp. 2480-2482.
- R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2734-2736.
- F. J. Deadrick, J. J. Barnard, T. J. Fessenden, J. W. Meredith, and J. Rintamaki, “Development of Beam Position Monitors for Heavy Ion Recirculators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB14, pp. 2557-2559.
- R. W. Carey et al., “Status of the use of Large-Scale CORBA Distributed Software Framework for NIF Controls”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O2_001.
- T. Kanayawa, S. Koseki, H. Kubo, and M. Kumada, “High Performance Active Filter for the Power Supply of the HIMAC Synchrotron Magnet”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP100G, pp. 2358-2360.
- R. B. Appleby et al., “Low Energy Beam Tracking Under Scattering for a Cold Electron Source in Manchester”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2615-2617.
- G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1321-1324.
- P. Plascjak et al., “The Operational Status of the National Institutes of Health Cyclotron Complex”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-25, pp. 685-688.
- B. N. Kosciuk, A. Blednykh, and S. Seletskiy, “Construction and Operational Performance of a Horizontally Adjustable Beam Profile Monitor at NSLS-II”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF07, pp. 55-58.
- R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 8-11.
- S. Herb and J. Kirchgessner, “Operation of CESR with Permanent Magnet Interactioin Region Quadrupoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 130-133.
- B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1549-1552.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Minimization of Emittance at the Cornell Electron Storage Ring With Sloppy Models”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 402-404.
- S. Eylon et al., “Initial Commissioning Results of the RTA Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA3, pp. 3390-3392.
- G. Atoian, A. Zelenski, A. Bogdanov, M. F. Runtso, and E. J. Stephenson, “Precision, Absolute Proton Beam Polarization Measurements at 200 MeV Beam”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP190, pp. 444-446.
- F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-01, pp. 268-277.
- F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
- K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446.
- S. S. Cao, J. Chen, L. W. Lai, Y. B. Leng, and N. Zhang, “Beam Arrival Time Analisis Based on CBPM at DCLS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4023-4025.
- M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, and J. Rossbach, “Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2818-2821.
- S. Sytova, “VOLC: Volume Free Electron Laser Simulation Code”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH003, pp. 14-17.
- P. R. Cameron, M. C. Grau, M. Morvillo, T. J. Shea, and R. E. Sikora, “RHIC Beam Position Monitor Characterization”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ05, pp. 2458-2460.
- C. P. Manin, E. J. Bond, A. D. Casey, R. D. Clark, and G. W. Norman, “Streamlining the Target Fabrication Request at the National Ignition Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 176-179.
- C. Boyer et al., “Thirty Meter Telescope Adaptive Optics Computing Challenges”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MODAULT01, pp. 36-39.
- S. Schulz et al., “Few-Femtosecond Facility-Wide Synchronization of the European XFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 318-321.
- R. J. Ducar, T. M. Tomasko, and L. A. Winterowd, “A CAMAC Based High-Resolution Repetitive Waveform Generator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4149-4152.
- K. Kostro, R. Billen, and C. Roderick, “On-change Publishing of Database Resident Control System Data”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP013, pp. 120-122.
- J. Cherix, M. Maerki, H. R. Fitze, H. Frei, and P. K. Sigg, “Development of High Power Gridded Tube CW RF Systems with Excellent Reliability and Maintainability”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAL2, pp. 418-422.
- T. D. Cassidy, A. J. Gorka, and R. B. Wehrle, “Insertion and Extraction of Internal Targetry at the Zero Gradient Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 640-642.
- K. G. Batrakov and S. Sytova, “Generation Regimes of FEL With Volume Distributed Feedback”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH005, pp. 41-44.
- S. Wang, M. D. Cropper, O. B. Malyshev, E. A. Seddon, and R. Valizadeh, “The Secondary Electron Yield from Transition Metals”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2403-2405.
- D. E. Suddeth, “Air-Filled Ion Chamber Beam Loss Monitors for the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 602-605.
- D. Boutin et al., “Residual Orbit Correction Studies for the FCC-hh”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3332-3334.
- K. Vodopivec and B. Vacaliuc, “High Throughput Data Acquisition with EPICS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 213-217.
- J. M. Bogaty and A. V. Rauchas, “Computerized Measurement of Injection Tunes at the Zero Gradient Synchrotron (ZGS)”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1765-1768.
- G. R. Swain, R. A. Jameson, R. A. Kandarian, D. J. Liska, E. R. Martin, and J. M. Potter, “Cavity Tuning for the LAMPF 805 MHz Linac”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I05, pp. 242-249.
- G. Yadav et al., “Simulation Study for an Inverse Designed Narrowband THz Radiator for Ultrarelativistic Electrons”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 973-975.
- A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
- S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097.
- R. J. Ducar, “A Control System for the Fermilab Master-Slave Servo Manipulator”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1751-1754.
- W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1057-1062.
- M. J. Henderson et al., “Machine Learning Based Sample Alignment at TOPAZ”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP116, pp. 851-855.
- S. A. Cherenshchikov, A. N. Dovbnya, and A. N. Opanasenko, “Secondary Emission in Cold-Cathode Magnetron Injection Gun”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA16, pp. 939-941.
- Z. T. Zhao, H. Ding, and H. Xu, “Commissioning Status of the Shanghai Synchrotron Radiation Facility”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUOAM01, pp. 998-1000.
- Y. Kurihara et al., “Development of Polarized Electron Source Using GaAs-AlGaAs Superlattice”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH423, pp. 647-649.
- S. Pfeiffer et al., “Status Update of the Fast Energy Corrector Cavity at FLASH”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 112-114.
- L. R. Ives et al., “200 kW CW, 350 MHz Multiple Beam Inductive Output Tube”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO08, pp. 946-947.
- Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP024, unpublished.
- M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3974-3977.
- Y. V. Krylov, E. V. Kaportsev, K. Moseev, N. I. Moseiko, and A. G. Valentinov, “The Automation of Energy Ramping for the Main Storage Ring of KSRS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 597-599.
- M. P. Pretelli, F. Burini, G. T. Taddia, S. M. Tenconi, A. Lampasi, and P. Zito, “Switching Network Units for High Currents and Voltages or Plasma Applications”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 603-605.
- K. C. D. Chan et al., “Commissioning Plan for a High-Current Proton Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W017, pp. 1150-1152.
- D. Bullard et al., “Modification of the CEBAF Transport Dipoles for Energy Upgrade Considerations”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP146, pp. 3309-3311.
- J. Chen, L. Lai, L. Yu, R. Yuan, and S. Cao, “Development and performance evaluation of the Cavity BPM system for SHINE”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG79, unpublished.
- L. S. Walling, P. Allison, and A. H. Shapiro, “Transverse Coupling Impedance Measurement Studies of Low-Q Cavities”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH442, pp. 704-706.
- E. J. Divall et al., “Grid-enabling the Astra Gemini Laser Data”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP015, pp. 435-437.
- Z. Zhao, S. Liu, and C. H. Wang, “BEPCII EPICS Data Archiving and Retrieving System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP002, pp. 411-413.
- J.-M. Christmann et al., “Findings of simulation studies for the fast corrector magnets of PETRA IV”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR53, pp. 1544-1547.
- A. Tauschwitz et al., “Experimental Investigations of Plasma Lens Focusing and Plasma Channel Transport of Heavy Ion Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAQ04, pp. 1852-1854.
- R. Benaroya, T. H. Blewitt, J. M. Brooks, and C. Laverick, “Effect of Fast Neutron Irradiation at Low Temperature on NbZr Coil Performance”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 383-386.
- Ms. Yao, Z. Ni, and X. Zhou, “Development of Computer Centralized Control System for Large- Scale Equipment”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper MOPV008, unpublished.
- C. Bieth, J. M. Baze, G. Dugay, A. Joubert, and C. Pagani, “GANIL RF Systems”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4117-4120.
- J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509.
- S. Zhou, “A 90 MeV Electron Linac of IHEP”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-28, pp. 505-507.
- J. Brown, A. Sukhanov, D. Passarelli, G. Romanov, and T. Xu, “Simulations of field emitters and multipacting in PIP-II Single Spoke Resonator Type-2”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 345-347.
- J. Bosser et al., “LHC Beam Instrumentation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAR3, pp. 465-467.
- D. Gavela et al., “Fabrication and Tests of a RF Cavity for a Novel Compact Superconducting Cyclotron for Radioisotope Production”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4585-4587.
- S. G. Schubert et al., “CsK2Sb Growth Studies: Towards High Quantum Efficiency and Smooth Surfaces”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2566-2568.
Back to search