Favourites
For Word
[n] N. Munemoto, K. Horioka, K. Okamura, S. Takano, and K. Takayama, “Laser Ablation Ion Source for Highly Charge-State Ion Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2632-2634. doi:10.18429/JACoW-IPAC2016-WEPMY036
[n] J. Heller, T. Flisgen, C. Schmidt, and U. van Rienen, “Quantification of Geometric Uncertainties in Single Cell Cavities for BESSY VSR using Polynomial Chaos”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 415-417. doi:10.18429/JACoW-IPAC2014-MOPME018
[n] C. Zannini, H. Bartosik, E. de la Fuente, I. Mases, and G. Rumolo, “Transverse instabilities at injection energy in the CERN-SPS: lessons learned during high intensity studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3482-3485. doi:10.18429/JACoW-IPAC2023-WEPL156
[n] R. Veness et al., “Experience From the Construction of a New Fast Wire Scanner Prototype for the CERN- SPS and its Optimisation for Installation in the CERN-PS Booster”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 479-482. doi:10.18429/JACoW-IBIC2015-TUPB061
[n] A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3603-3606. doi:10.18429/JACoW-IPAC2016-THPMW028
[n] G. Vignola, A. Amro, M. Attal, F. Makahleh, M. M. Shehab, and S. Varnasseri, “SESAME in Jordan”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAB007, pp. 586-589.
[n] Y. Morita et al., “Upgrading magnet power supply system in J-PARC main ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3762-3765. doi:10.18429/JACoW-IPAC2023-WEPM082
[n] S. Ushijima, H. Fujisawa, M. Ichikawa, Y. Iwashita, H. Tongu, and M. Yamada, “LEBT with Hybrid Magnets in a Proton Linac for Compact Neutron Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB013, pp. 304-306.
[n] J. P. Arnoul, J. J. Dupas, J. I. Nicoloso, F. P. Signol, and P. J. Betremieux, “The Laser Megajoule Facility: Control System Status Report”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB02, pp. 10-12.
[n] S. P. M?©ller, N. Hertel, and J. S. Nielsen, “Status and Very First Commissioning of the ASTRID2 Synchrotron Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA003, pp. 64-66.
[n] I. Gorgisyan et al., “First beam through the superconducting linac of European Spallation Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS056, unpublished.
[n] M. Scholz, M. Vogt, and J. Zemella, “Beam Optics Measurements at FLASH2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 863-865. doi:10.18429/JACoW-IPAC2015-MOPHA035
[n] J. C. Nugent and V. C. Palladino, “The Physics Programme of next MICE Step IV”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1361-1363. doi:10.18429/JACoW-IPAC2014-TUPME010
[n] S. S. Kurennoy, “Electromagnetic Design of RF Cavities for Accelerating Low-Energy Muons”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD017, pp. 1446-1448.
[n] A. Peters, “Maximizing Technology Transfer Benefits to Society”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBN5, pp. 7-11.
[n] Z. H. Bai, W. Li, L. Wang, and P. H. Yang, “Design Study for the First Version of the HALS Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2713-2715. doi:10.18429/JACoW-IPAC2017-WEPAB060
For LaTeX
Use Complete Form
For BibTeX
References
- N. Munemoto, K. Horioka, K. Okamura, S. Takano, and K. Takayama, “Laser Ablation Ion Source for Highly Charge-State Ion Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2632-2634.
- J. Heller, T. Flisgen, C. Schmidt, and U. van Rienen, “Quantification of Geometric Uncertainties in Single Cell Cavities for BESSY VSR using Polynomial Chaos”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 415-417.
- C. Zannini, H. Bartosik, E. de la Fuente, I. Mases, and G. Rumolo, “Transverse instabilities at injection energy in the CERN-SPS: lessons learned during high intensity studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL156, pp. 3482-3485.
- R. Veness et al., “Experience From the Construction of a New Fast Wire Scanner Prototype for the CERN- SPS and its Optimisation for Installation in the CERN-PS Booster”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 479-482.
- A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3603-3606.
- G. Vignola, A. Amro, M. Attal, F. Makahleh, M. M. Shehab, and S. Varnasseri, “SESAME in Jordan”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WOAB007, pp. 586-589.
- Y. Morita et al., “Upgrading magnet power supply system in J-PARC main ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM082, pp. 3762-3765.
- S. Ushijima, H. Fujisawa, M. Ichikawa, Y. Iwashita, H. Tongu, and M. Yamada, “LEBT with Hybrid Magnets in a Proton Linac for Compact Neutron Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB013, pp. 304-306.
- J. P. Arnoul, J. J. Dupas, J. I. Nicoloso, F. P. Signol, and P. J. Betremieux, “The Laser Megajoule Facility: Control System Status Report”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOAB02, pp. 10-12.
- S. P. M?©ller, N. Hertel, and J. S. Nielsen, “Status and Very First Commissioning of the ASTRID2 Synchrotron Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA003, pp. 64-66.
- I. Gorgisyan et al., “First beam through the superconducting linac of European Spallation Source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS056, this conference.
- M. Scholz, M. Vogt, and J. Zemella, “Beam Optics Measurements at FLASH2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 863-865.
- J. C. Nugent and V. C. Palladino, “The Physics Programme of next MICE Step IV”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1361-1363.
- S. S. Kurennoy, “Electromagnetic Design of RF Cavities for Accelerating Low-Energy Muons”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD017, pp. 1446-1448.
- A. Peters, “Maximizing Technology Transfer Benefits to Society”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBN5, pp. 7-11.
- Z. H. Bai, W. Li, L. Wang, and P. H. Yang, “Design Study for the First Version of the HALS Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2713-2715.
Back to search