Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. L. Bailey, D. Capatina, J. W. Morgan, and H.-D. Nuhn, “An Instrument Design for the Accurate Determination of the Electron Beam Location in the Linac Coherent Light Source Undulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN102, pp. 4324-4326.
[n] P. B. Welander, Z. Li, M. H. Nasr, and S. G. Tantawi, “Parallel-Feed SRF Accelerator Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3835-3837. doi:10.18429/JACoW-IPAC2018-THPAL080
[n] A. V. Feschenko and P. N. Ostroumov, “Bunch Shape Analyser with Transverse Scanning of the Low Energy Secondary Electrons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 750-753.
[n] D. Brandt et al., “Beam Dynamics Effects in the CERN SPS Used as a Lepton Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1205-1208.
[n] A. L. Wu, Q. K. Jia, F. W. Wang, and J. Wu, “The parameter study of terahertz Free-Electron Laser Oscillator based on Electrostatic Accelerator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD51, pp. 488-490.
[n] P. Girault, G. Bienvenu, and D. Tronc, “Power Tests Results of4pi/5 Backward TW Structure Without and With Sled RF Pulse Compressor”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 37-40.
[n] S. Chouksey, S. Krishnagopal, V. Kumar, S. Lal, K. K. Pant, and V. Prasad, “Mechanical Engineering Challenges in the Development of the FEL at RRCAT”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA111, pp. 479-481.
[n] J. M. Carmona, I. Podadera, J. Garc?¡a L??pez, and M. C. Jim?®nez-Ramos, “New Tests of Fluorescence Beam Profilers for the Linear IFMIF Prototype Accelerator (LIPAC) using 9 MeV Deuteron Beams”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG028, pp. 192-194.
[n] J. W. Poukey, C. A. Frost, M. G. Mazarakis, and J. J. Ramirez, “Production of Tightly Focused E-Beams with High-Current Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3059-3062.
[n] E. A. Heighway, “An Accelerator Technology Legacy”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH1-04, pp. 664-668.
[n] J. Bradley, J. D. Crnkovic, B. E. Drendel, D. Stratakis, and N. S. Froemming, “Application of Quad-Scan Measurement Techniques to Muon Beams in the Muon g-2 Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1852-1855. doi:10.18429/JACoW-IPAC2018-WEPAF016
[n] B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
[n] J. C. Hovater, “Performance of SRF Systems in Large Scale Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93C02, pp. XX-XX.
[n] M. Cavenaile, F. Ames, C. R. J. Charles, O. K. Kester, B. E. Schultz, and R. Kanungo, “Pulse Stretching Out of the CANREB EBIS”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH03, unpublished.
[n] C. Yao, Y.-C. Chae, and W. E. Norum, “An FPGA-based Bunch-by-Bunch Tune Measurement System for the APS Storage Ring”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM064, pp. 315-317.
[n] J. Zhao, D. Q. Gao, H. Zhang, and Z. Z. Zhou, “Design of the Control System of Pulsed Power Supplies for WHMM Injection Bump Magnets”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3442-3445. doi:10.18429/JACoW-IPAC2017-WEPVA077
[n] L. Shen, Y. L. Chi, and C. Huang, “The Pulsed Power Supply using IGBT Topology for CSNS Injection System Bump Magnet”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN044, pp. 2140-2142.
[n] T. J. Ma et al., “Bunch-by-bunch Beam Current Monitor for HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE030, pp. 1035-1037.
[n] L. Michelotti, “Resonance Topology”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1372-1375.
[n] M. H. Nasr and S. G. Tantawi, “Corrections of Klystron Output Pulse in SW Accelerator Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3772-3773. doi:10.18429/JACoW-IPAC2019-THPGW084
[n] G. Vismara, “Thhe New Front-end Narrow-band Electronics for the LEP Beam Orbit Measurement System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1548-1551.
[n] W. Fu, T. D, and S. Nemesure, “A Generic REST API Service for Control Databases”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 465-468. doi:10.18429/JACoW-ICALEPCS2017-TUPHA038
[n] H. Shang, G. Decker, L. Emery, W. E. Norum, and R. Soliday, “Application Software for the BSP-100 Beam Position Monitor at the APS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP036, pp. 167-169.
[n] J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3345-3347. doi:10.18429/JACoW-IPAC2024-THPG38
[n] Y. B. Yan et al., “Beam Diagnostics System for a Photo-Neutron Source Driven by 15MeV Electron Linac”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC06, pp. 57-59.
For LaTeX
Use Complete Form
For BibTeX
References
- J. L. Bailey, D. Capatina, J. W. Morgan, and H.-D. Nuhn, “An Instrument Design for the Accurate Determination of the Electron Beam Location in the Linac Coherent Light Source Undulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN102, pp. 4324-4326.
- P. B. Welander, Z. Li, M. H. Nasr, and S. G. Tantawi, “Parallel-Feed SRF Accelerator Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3835-3837.
- A. V. Feschenko and P. N. Ostroumov, “Bunch Shape Analyser with Transverse Scanning of the Low Energy Secondary Electrons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 750-753.
- D. Brandt et al., “Beam Dynamics Effects in the CERN SPS Used as a Lepton Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1205-1208.
- A. L. Wu, Q. K. Jia, F. W. Wang, and J. Wu, “The parameter study of terahertz Free-Electron Laser Oscillator based on Electrostatic Accelerator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD51, pp. 488-490.
- P. Girault, G. Bienvenu, and D. Tronc, “Power Tests Results of4pi/5 Backward TW Structure Without and With Sled RF Pulse Compressor”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 37-40.
- S. Chouksey, S. Krishnagopal, V. Kumar, S. Lal, K. K. Pant, and V. Prasad, “Mechanical Engineering Challenges in the Development of the FEL at RRCAT”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA111, pp. 479-481.
- J. M. Carmona, I. Podadera, J. Garc?¡a L??pez, and M. C. Jim?®nez-Ramos, “New Tests of Fluorescence Beam Profilers for the Linear IFMIF Prototype Accelerator (LIPAC) using 9 MeV Deuteron Beams”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG028, pp. 192-194.
- J. W. Poukey, C. A. Frost, M. G. Mazarakis, and J. J. Ramirez, “Production of Tightly Focused E-Beams with High-Current Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3059-3062.
- E. A. Heighway, “An Accelerator Technology Legacy”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH1-04, pp. 664-668.
- J. Bradley, J. D. Crnkovic, B. E. Drendel, D. Stratakis, and N. S. Froemming, “Application of Quad-Scan Measurement Techniques to Muon Beams in the Muon g-2 Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1852-1855.
- B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
- J. C. Hovater, “Performance of SRF Systems in Large Scale Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93C02, pp. XX-XX.
- M. Cavenaile, F. Ames, C. R. J. Charles, O. K. Kester, B. E. Schultz, and R. Kanungo, “Pulse Stretching Out of the CANREB EBIS”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH03, unpublished.
- C. Yao, Y.-C. Chae, and W. E. Norum, “An FPGA-based Bunch-by-Bunch Tune Measurement System for the APS Storage Ring”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM064, pp. 315-317.
- J. Zhao, D. Q. Gao, H. Zhang, and Z. Z. Zhou, “Design of the Control System of Pulsed Power Supplies for WHMM Injection Bump Magnets”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3442-3445.
- L. Shen, Y. L. Chi, and C. Huang, “The Pulsed Power Supply using IGBT Topology for CSNS Injection System Bump Magnet”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN044, pp. 2140-2142.
- T. J. Ma et al., “Bunch-by-bunch Beam Current Monitor for HLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE030, pp. 1035-1037.
- L. Michelotti, “Resonance Topology”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1372-1375.
- M. H. Nasr and S. G. Tantawi, “Corrections of Klystron Output Pulse in SW Accelerator Testing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3772-3773.
- G. Vismara, “Thhe New Front-end Narrow-band Electronics for the LEP Beam Orbit Measurement System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1548-1551.
- W. Fu, T. D, and S. Nemesure, “A Generic REST API Service for Control Databases”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 465-468.
- H. Shang, G. Decker, L. Emery, W. E. Norum, and R. Soliday, “Application Software for the BSP-100 Beam Position Monitor at the APS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP036, pp. 167-169.
- J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG38, pp. 3345-3347.
- Y. B. Yan et al., “Beam Diagnostics System for a Photo-Neutron Source Driven by 15MeV Electron Linac”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC06, pp. 57-59.
Back to search