JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. M. Liuzzo et al., “Updates on Lattice Modeling and Tuning for the ESRF-EBS Lattice.”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2818-2821. doi:10.18429/JACoW-IPAC2016-WEPOW005
[n]	M. Venturini, A. Dragt, and A. Wolski, “Wigglers and Single-Particle Dynamics in the NLC Damping Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB023, pp. 2772-2774. 
[n]	R. Garoby, “SPL at CERN”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROBAU04, pp. 930-933. 
[n]	X. Liu et al., “Optical Cavity R&D for Laser-Electron Interaction Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4587-4589. doi:10.18429/JACoW-IPAC2018-THPMK115
[n]	F. Zimmermann et al., “Single-pass Beam Measurements for the Verification of the LHC Magnetic Model”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC015, pp. 489-491. 
[n]	V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199. 
[n]	A. Schmidt, G. Kreps, A. Matheisen, and H. Weitkaemper, “Updates on 1.3 GHz Cavity Weld to Helium Vessel and Application of the FMS”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO040, pp. 665-668. 
[n]	I. Ben-Zvi et al., “R&D towards Cooling of the RHIC Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPA005, pp. 39-41. 
[n]	T. Plath, J. Roensch-Schulenburg, J. Rossbach, H. Schlarb, S. Schreiber, and B. Steffen, “Commissioning and Diagnostics Development for the New Short-Pulse Injector Laser at FLASH”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC03, pp. 353-356. 
[n]	Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1806-1809. 
[n]	G.-Y. Hsiung et al., “TPS Vacuum System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP018, pp. 387-389. 
[n]	D. Cook et al., “Initial Experimental Results of a New Direct Converter for High Energy Physics Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS123, pp. 2661-2663. 
[n]	C.-Y. Tsai, J. Wu, C. Yang, M. Yoon, and G. Zhou, “Sideband Instability in a Tapered Free Electron Laser”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 76-79. doi:10.18429/JACoW-FEL2017-MOP020
[n]	M. G. Minty et al., “Energy Change of a Depolarizing Resonance Due to a Type-3 Siberian Snake”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2506-2509. 
[n]	S. Bart Pedersen, S. Bozyigit, and S. Jackson, “Java Expert GUI Framework for CERN's Beam Instrumentation Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS027, pp. 852-855. 
[n]	B. T. Jacobson, T. J. Campese, A. Y. Murokh, A. C. Bartnik, and B. M. Dunham, “Design and Initial Demonstration Results of Laser Wire Scanner for Energy Recovery Linacs”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF11, pp. 525-525. 
[n]	C. M. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM202, pp. XX-XX. 
[n]	V. Litvinenko et al., “ERL Based Electron-Ion Collider eRHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP043, pp. 2768-2770. 
[n]	T. Pugnat, B. Dalena, A. Simona, L. Bonaventura, R. De Maria, and J. Molson, “Accurate and Efficient Tracking in Electromagnetic Quadrupoles”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3207-3210. doi:10.18429/JACoW-IPAC2018-THPAK004
[n]	A. R. Goulden, R. Bate, R. K. Buckley, P. A. McIntosh, and S. M. Pattalwar, “Cryogenic Refrigeration Equipment for the New Light Source (NLS) Superconducting LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA077, pp. 3849-3851. 
[n]	V. Ptitsyn, A. Marusic, R. J. Michnoff, M. G. Minty, G. Robert-Demolaize, and T. Satogata, “Slow Orbit Feedback at RHIC”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM108, pp. 469-472. 
[n]	G. Rees, “A Pulsed Spallation Source for Neutron Scattering Research”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 989-993. 
[n]	Z. Reszela et al., “Sardana ÔÇô A Python Based Software Package for Building Scientific Scada Applications”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO206, pp. 25-27. 
[n]	M. D. Hancock and B. G. Martlew, “A Modular Personnel Safety System for VELA based on Commercial Safety Network Controllers”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO038, pp. 123-125. 
[n]	T. Suwada et al., “Enhancement of the Positron Intensity by a Tungsten Single Crystal Target at the KEKB Injector Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN030, pp. 2778-2780. 
[n]	R. S. Shinde et al., “Effect of Eddy Current in Magnetic Lamination on Pulsed Septum Magnet Response”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA013, pp. 643-645. 
[n]	J. Jadlovsky et al., “Information System for ALICE Experiment Data Access”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1451-1454. doi:10.18429/JACoW-ICALEPCS2017-THPHA041
[n]	M. J. Barnes et al., “Development of an Eddy Current Septum for LINAC4”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD002, pp. 1434-1436. 
[n]	W. Mexner, K. Cerff, M. Hagelstein, and T. Spangenberg, “Experiences with PVSS II as an Overall SCADA System for ANKA”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUX02, pp. 46-48. 
[n]	A. Schmidt, J. Iversen, A. Matheisen, and W. Singer, “PED Requirements Applied to the Cavity and Helium Tank Manufacturing”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP048, pp. 227-230. 
[n]	T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828. 
[n]	J. Nudell, Z. Liu, C. A. Preissner, and V. Sajaev, “Calculation of Orbit Distortions for the APS Upgrade Due to Girder Resonances”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 95-98. doi:10.18429/JACoW-MEDSI2018-TUPH28
[n]	H. Gassot, S. Blivet, T. Junquera, G. Olry, and E. Zaplatin, “Mechanical Studies of the Multi-Gap Spoke Cavity for European Project HIPPI”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP33, pp. 312-313. 
[n]	V. Tympel et al., “First Measurements of a New Type of Coreless Cryogenic Current Comparators (4C) for Non-Destructive Intensity Diagnostics of Charged Particles”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 82-84. doi:10.18429/JACoW-IBIC2019-MOPP008
[n]	N. Toge et al., “New Final Focus System for the SLAC Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2152-2155. 
[n]	T. A. Trinh et al., “Development of a 13.56MHz RF Implanter at PEFP”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA031, pp. 3747-3749. 
[n]	T. V. Shaftan et al., “Status of the NSLS-II Injection System Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC089, pp. 2198-2200. 
[n]	K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n]	X. R. Resende, R. H. A. Farias, L. Liu, M. B. Plotegher, and P. F. Tavares, “Analysis of the LNLS Storage Ring Optics Using LOCO”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP012, pp. 3720-3722. 
[n]	C. M. Fortgang, Y. K. Batygin, I. N. Draganic, R. W. Garnett, R. C. McCrady, and L. Rybarcyk, “Design of a Duoplasmatron Extraction Geometry and LEBT for the LANSCE H+ RFQ Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM18, pp. 673-675. 
[n]	M. Felber et al., “New MTCA.4-based Hardware Developments for the Control of the Optical Synchronization Systems at DESY”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD07, pp. 152-156. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search