Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Bartolini et al., “Status of the PETRA IV Machine Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1475-1478. doi:10.18429/JACoW-IPAC2022-TUPOMS029
[n] I. Ben-Zvi, “ERL Prototype at BNL”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOBAU06, pp. 41-41.
[n] J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3234-3237.
[n] A. Orlati et al., “Evolution in the Development of the Italian Single-dish COntrol System (DISCOS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1366-1369. doi:10.18429/JACoW-ICALEPCS2017-THPHA014
[n] V. Ptitsyn, A. Marusic, R. J. Michnoff, M. G. Minty, G. Robert-Demolaize, and T. Satogata, “Slow Orbit Feedback at RHIC”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM108, pp. 469-472.
[n] M. Broseta, A. Burgos, G. Cuni, D. Fernandez-Carreiras, D. Roldan, and S. Rubio-Manrique, “A Web-Based Report Tool for Tango Control Systems via Websockets”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 826-829. doi:10.18429/JACoW-ICALEPCS2017-TUPHA173
[n] D. Saez de Jauregui et al., “Possible Superconducting Insertion Devices with Period Length Doubling for Beamlines of Third Generation Light Sources”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC161, pp. 3269-3271.
[n] H. X. Yang, H. X. Deng, B. Liu, D. Wang, and K. S. Zhou, “Relative Timing Jitter Effects on Two-stage Seeded FEL at SHINE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1551-1554. doi:10.18429/JACoW-IPAC2021-TUPAB078
[n] L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n] R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527.
[n] R. J. Bakker et al., “Fast and Flexible BPM-System: Valuable Commissioning Tool for the BESSY II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP29G, pp. 1482-1484.
[n] Hosoda N., Aoki T., Fukami K., Fukui T., Kodera M., Masuda T., Ohshima T., Suzuki H., Takao M., Tanaka R., Tani N., Yamashita A., Yonehara H., “Integration of the Booster Synchrotron Control System to the Spring-8 Control System”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P27, pp. XX-XX.
[n] A. Yamashita et al., “New SPring-8 Control Room: Towards Unified Operation with SACLA and SPring-8 II Era.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN025, pp. 296-299.
[n] J. A. Uythoven et al., “Injection Protection Upgrade for the HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2136-2139. doi:10.18429/JACoW-IPAC2015-TUPTY051
[n] L. Rybarcyk et al., “Design Requirements and Expected Performance of the New LANSCE H+ RFQ”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA17, pp. 336-338.
[n] A. Vella, R. Cai, D. Mirarchi, S. Redaelli, and G. Valentino, “Preliminary results of crystal channelling optimisation in the LHC using reinforcement learning”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS031, unpublished.
[n] P. Shapiro, J. M. Frame, and R. B. Theus, “The NRL Cyclotron Ion Optics System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 917-922.
[n] N. Yu. Muchnoi, “FCC-ee Beam Energy Measurement Suggestion”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SUT1A3, pp. 230-232.
[n] B. F. Milton et al., “A 30 MeV H Cyclotron for Isotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-02, pp. 145-148.
[n] A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Temperature Measurements of Carbon Stripper Foil by Pulsed 650keV H- Ion Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP108, pp. 3620-3622.
[n] J. G. Hwang and J. Kuszynski, “First Prototype of a Coronagraph-based Halo Monitor for BERLinPro”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 434-437. doi:10.18429/JACoW-IBIC2018-WEPB03
[n] H. Matsumoto et al., “Operation of the C-Band 50 MW Klystron with Smart Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D030, pp. 157-159.
[n] S. A. Overstreet et al., “Manufacturing the Harmonic Kicker Cavity Prototype for the Electron-Ion Collider”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 601-603. doi:10.18429/JACoW-NAPAC2022-WEZD6
[n] L. W. Lai et al., “BATCH APPLICATIONS OF DIGITAL BPM PROCESSORS FROM THE SINAP”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 658-660. doi:10.18429/JACoW-IBIC2016-WEPG17
For LaTeX
Use Complete Form
For BibTeX
References
- R. Bartolini et al., “Status of the PETRA IV Machine Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1475-1478.
- I. Ben-Zvi, “ERL Prototype at BNL”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOBAU06, pp. 41-41.
- J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3234-3237.
- A. Orlati et al., “Evolution in the Development of the Italian Single-dish COntrol System (DISCOS)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1366-1369.
- V. Ptitsyn, A. Marusic, R. J. Michnoff, M. G. Minty, G. Robert-Demolaize, and T. Satogata, “Slow Orbit Feedback at RHIC”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM108, pp. 469-472.
- M. Broseta, A. Burgos, G. Cuni, D. Fernandez-Carreiras, D. Roldan, and S. Rubio-Manrique, “A Web-Based Report Tool for Tango Control Systems via Websockets”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 826-829.
- D. Saez de Jauregui et al., “Possible Superconducting Insertion Devices with Period Length Doubling for Beamlines of Third Generation Light Sources”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC161, pp. 3269-3271.
- H. X. Yang, H. X. Deng, B. Liu, D. Wang, and K. S. Zhou, “Relative Timing Jitter Effects on Two-stage Seeded FEL at SHINE”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1551-1554.
- L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2584-2586.
- R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527.
- R. J. Bakker et al., “Fast and Flexible BPM-System: Valuable Commissioning Tool for the BESSY II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP29G, pp. 1482-1484.
- Hosoda N., Aoki T., Fukami K., Fukui T., Kodera M., Masuda T., Ohshima T., Suzuki H., Takao M., Tanaka R., Tani N., Yamashita A., Yonehara H., “Integration of the Booster Synchrotron Control System to the Spring-8 Control System”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P27, pp. XX-XX.
- A. Yamashita et al., “New SPring-8 Control Room: Towards Unified Operation with SACLA and SPring-8 II Era.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN025, pp. 296-299.
- J. A. Uythoven et al., “Injection Protection Upgrade for the HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2136-2139.
- L. Rybarcyk et al., “Design Requirements and Expected Performance of the New LANSCE H+ RFQ”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA17, pp. 336-338.
- A. Vella, R. Cai, D. Mirarchi, S. Redaelli, and G. Valentino, “Preliminary results of crystal channelling optimisation in the LHC using reinforcement learning”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS031, this conference.
- P. Shapiro, J. M. Frame, and R. B. Theus, “The NRL Cyclotron Ion Optics System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 917-922.
- N. Yu. Muchnoi, “FCC-ee Beam Energy Measurement Suggestion”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SUT1A3, pp. 230-232.
- B. F. Milton et al., “A 30 MeV H Cyclotron for Isotope Production”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-02, pp. 145-148.
- A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Temperature Measurements of Carbon Stripper Foil by Pulsed 650keV H- Ion Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP108, pp. 3620-3622.
- J. G. Hwang and J. Kuszynski, “First Prototype of a Coronagraph-based Halo Monitor for BERLinPro”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 434-437.
- H. Matsumoto et al., “Operation of the C-Band 50 MW Klystron with Smart Modulator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D030, pp. 157-159.
- S. A. Overstreet et al., “Manufacturing the Harmonic Kicker Cavity Prototype for the Electron-Ion Collider”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 601-603.
- L. W. Lai et al., “BATCH APPLICATIONS OF DIGITAL BPM PROCESSORS FROM THE SINAP”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 658-660.
Back to search