Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “Network Management of Real-Time Embedded Processors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1823-1826.
[n] D. Einfeld et al., “Status of the Injector System for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP70, pp. 2427-2429.
[n] J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1590-1595. doi:10.18429/JACoW-ICALEPCS2025-THPD013
[n] J. M. Meyer et al., “Facing the Challenges of Experiment Control and Data Management at ESRF-EBS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 66-70. doi:10.18429/JACoW-ICALEPCS2023-MO2AO01
[n] E. Traykov et al., “Double achromat solution with a dedicated collimation system for the MEBT-3 section of MYRRHA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 63-65. doi:10.18429/JACoW-IPAC2023-MOPA004
[n] B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3053-3055.
[n] L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX.
[n] L. Perrot et al., “Detailed design studies of the high energy beam transport line of the Minerva Project at SCK CEN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 69-72. doi:10.18429/JACoW-IPAC2023-MOPA011
[n] N. Bunijevac and D. Monteiro, “Scheduler for cooling and ventilation plants: feedback on easy and low cost method for energy savings”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD110, unpublished.
[n] H. Kraft and L. Perrot, “BPM for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2143-2146. doi:10.18429/JACoW-IPAC2021-TUPAB284
[n] Yu. K. Osina et al., “Cyclotron of Multicharged Ions”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 96-98. doi:10.18429/JACoW-RuPAC2021-FRA02
[n] S. Arjmand, “Plasma generation in capillary discharges simulated with COMSOL for charged particle acceleration”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS022, unpublished.
[n] H. Schlarb, N. Heidbrook, H. Kapitza, F. Ludwig, and N. Nagad, “Precision RF Gun Phase Monitor System for the VUV-FEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH025, pp. 1052-1054.
[n] C. M. Warsop et al., “High Intensity Studies on the ISIS Synchrotron, Including Key Factors for Upgrades and the Effects of Half Integer Resonance.”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B05, pp. 619-623.
[n] P. Arcioni, M. Bressan, and L. Perregrini, “A New 3-D Electromagnetic Solver for the Design of Arbitrarily Shaped Accelerating Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 772-775.
[n] R. T. Dowd, A. Michalczyk, and K. Zingre, “Cavity Load Impedance Diagnostic at the Australian Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP064, pp. 2153-2155.
[n] J. Grillenberger, J. M. Humbel, A. C. Mezger, M. Seidel, and W. Tron, “Status and Further Development of the PSI High Intensity Proton Facility”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT004, pp. 37-39.
[n] P. Pierini, F. Broggi, G. Conciauro, P. Arcioni, and M. Bressan, “The Groove Guide: A Non-Conventional Interaction Structure for Microwave FEL Experiments”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1569-1572.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “Network Management of Real-Time Embedded Processors”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1823-1826.
- D. Einfeld et al., “Status of the Injector System for the Synchrotron Light Source ANKA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP70, pp. 2427-2429.
- J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1590-1595.
- J. M. Meyer et al., “Facing the Challenges of Experiment Control and Data Management at ESRF-EBS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2AO01, pp. 66-70.
- E. Traykov et al., “Double achromat solution with a dedicated collimation system for the MEBT-3 section of MYRRHA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA004, pp. 63-65.
- B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3053-3055.
- L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX.
- L. Perrot et al., “Detailed design studies of the high energy beam transport line of the Minerva Project at SCK CEN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA011, pp. 69-72.
- N. Bunijevac and D. Monteiro, “Scheduler for cooling and ventilation plants: feedback on easy and low cost method for energy savings”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD110, unpublished.
- H. Kraft and L. Perrot, “BPM for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2143-2146.
- Yu. K. Osina et al., “Cyclotron of Multicharged Ions”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 96-98.
- S. Arjmand, “Plasma generation in capillary discharges simulated with COMSOL for charged particle acceleration”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS022, unpublished.
- H. Schlarb, N. Heidbrook, H. Kapitza, F. Ludwig, and N. Nagad, “Precision RF Gun Phase Monitor System for the VUV-FEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH025, pp. 1052-1054.
- C. M. Warsop et al., “High Intensity Studies on the ISIS Synchrotron, Including Key Factors for Upgrades and the Effects of Half Integer Resonance.”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B05, pp. 619-623.
- P. Arcioni, M. Bressan, and L. Perregrini, “A New 3-D Electromagnetic Solver for the Design of Arbitrarily Shaped Accelerating Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 772-775.
- R. T. Dowd, A. Michalczyk, and K. Zingre, “Cavity Load Impedance Diagnostic at the Australian Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP064, pp. 2153-2155.
- J. Grillenberger, J. M. Humbel, A. C. Mezger, M. Seidel, and W. Tron, “Status and Further Development of the PSI High Intensity Proton Facility”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT004, pp. 37-39.
- P. Pierini, F. Broggi, G. Conciauro, P. Arcioni, and M. Bressan, “The Groove Guide: A Non-Conventional Interaction Structure for Microwave FEL Experiments”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1569-1572.
Back to search