Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Levenson et al., “Alternative negative electron affinity activation studies at HERACLES”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 638-641. doi:10.18429/JACoW-IPAC2024-MOPR80
[n] J. Jarvis, A. Mondal, A. Romanov, J. Ruan, M. Wallbank, and V. Lebedev, “New advances in optical stochastic cooling”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOZD1, unpublished.
[n] N. Kuklev, H. Shang, L. Emery, M. Borland, and Y. Sun, “Physics-coupled Bayesian algorithm for APS-U nonlinear dynamics tuning”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP074, unpublished.
[n] A. Anoshin et al., “A NEW INJECTION SYSTEM FOR KURCHATOV SOURCE OF SR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU01, pp. XX-XX.
[n] L. Ponce et al., “ELENA - From Commissioning to Operation”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2391-2394. doi:10.18429/JACoW-IPAC2022-THOXGD1
[n] R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2727-2730. doi:10.18429/JACoW-IPAC2023-WEPA035
[n] S. Myers, “Beam-Beam Simulation for LEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2503-2506.
[n] D. Xu, J. Berg, S. Peggs, and V. Ptitsyn, “Lattice design for Low Energy Cooling in EIC HSR-IR2”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 496-499. doi:10.18429/JACoW-NAPAC2025-TUP059
[n] L. Maindive et al., “Continuous integration on top of the existing control system of LIPAc, for a RF conditioning test bench”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 366-372. doi:10.18429/JACoW-ICALEPCS2025-TUMG005
[n] X. Huang, A. Zholents, and J. Safranek, “Obtaining picosecond x-ray pulses on fourth generation synchrotron light sources”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM062, unpublished.
[n] B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2925-2927. doi:10.18429/JACoW-IPAC2019-WEPRB051
[n] A. Moretti, M. Popovic, E. S. M. McCrory, F. G. Garcia, and T. K. Kroc, “Continued Monitoring of the Conditioning of the Fermilab Linac 805 MHz Cavities”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP029, pp. 464-466.
[n] D. A. Turner et al., “Flux Expulsion Lens: Concept and Measurements”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 56-61. doi:10.18429/JACoW-SRF2023-MOPMB003
[n] A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 627-633. doi:10.18429/JACoW-SRF2023-WEIXA03
[n] G. Hallilingaiah, A. Arnold, S. Gatzmaga, P. Murcek, J. Teichert, and R. Xiang, “Preliminary results of electromagnetic simulation for optimizing an SRF gun cavity”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP57, unpublished.
[n] W. L. Millar, G. Burt, and W. Wuensch, “Monte Carlo Model of High-Voltage Conditioning and Operation”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 283-286. doi:10.18429/JACoW-LINAC2022-MOPORI24
[n] M. Kaemingk, P. Anisimov, E. Simakov, and H. Xu, “Update on multi-objective genetic optimizations of the photoinjector for CARIE”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2439-2442. doi:10.18429/JACoW-IPAC2025-WEPS113
[n] R. Mercado et al., “Motion control systems for insertion devices in Diamond-II”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 518-523. doi:10.18429/JACoW-ICALEPCS2025-TUPD008
[n] J. Safranek, O. Singh, and L. Solomon, “Orbit Stability Improvements at the NSLS X-Ray Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ19, pp. 2711-2713.
[n] B. Aksel and K. Leung, “Cooldown Stresses on the Coldmass of SSC Dipole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2200-2203.
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1075-1078. doi:10.18429/JACoW-IPAC2025-TUPB048
[n] N. Kuklev et al., “ML-enhanced commissioning of the APS-U accelerator complex”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1778-1781. doi:10.18429/JACoW-IPAC2024-TUPS50
[n] K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2060-2063. doi:10.18429/JACoW-IPAC2024-WEPC43
[n] S. M. Chung, C. D. Park, S. H. Gu, and M. Kwon, “Beam-Gas Lifetime in a Low Emittance, Medium-Energy Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA120, pp. 1357-1359.
[n] D. Francescone et al., “On the Betatron radiation in cylindrically symmetric plasma-ion channels”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2170-2173. doi:10.18429/JACoW-IPAC2023-TUPL182
[n] C. Adolphsen, K. L. F. Bane, and K. A. Thompson, “Multibunch Beam Break-Up in Detuned Structures”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3342-3345.
[n] N. Kuklev, A. Romanov, J. Jarvis, M. Wallbank, and N. Banerjee, “Facility-scale differentiable virtual accelerator at Fermilab”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 106-110. doi:10.18429/JACoW-NAPAC2025-MOP028
[n] S. Myers, “Effect of Reactive Feedback on the Transverse Mode Coupling Instability Using the Few-Particles Model and Simulation”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2341-2344.
[n] H. Lovelace III et al., “An update on the transition crossing schemes for the EIC hadron storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1630-1633. doi:10.18429/JACoW-IPAC2024-TUPS03
[n] L. T. Sun et al., “FECR Ion Source Development and Challenges”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 1-5. doi:10.18429/JACoW-ECRIS2020-MOWZO01
[n] J. J. Error, D. R. Bruce, J. J. Fazekas, S. A. Helus, and J. R. Maines, “Deformation Monitoring of the Spallation Neutron Source (SNS) Tunnels”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE037, pp. 2509-2511.
[n] B. Muratori and J. Jones, “RUEDI microscopy: solenoids or quadrupoles?”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3256-3259. doi:10.18429/JACoW-IPAC2023-WEPL062
[n] F. Marti, J. Griffin, and V. Taivassalo, “Design of the Axial Injection System for the NSCL Cyclotrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2450-2453.
[n] M. Bartolini, L. R. Brederode, M. Deegan, M. Miccolis, N. P. Rees, and J. Santander-Vela, “Scaling Agile for the Square Kilometre Array”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1080. doi:10.18429/JACoW-ICALEPCS2019-WEPHA011
[n] G. Bellomo and L. Serafini, “Design of the Central Region for Axial Injection in the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-11, pp. 507-510.
[n] S. Kim, H. S. Kang, M. H. Chun, J. S. Yang, and S. H. Nam and Y, “HIGH POWER RF SYSTEM AND ITS UPGRADE PLAN FOR THE PLS STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP005, pp. XX-XX.
[n] D. P. Siddons and Z. Yin, “Secure Remote Operations of NSLS Beamlines with (Free)NX”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB11, pp. 421-423.
[n] H. Nishiumura, G. Portmann, D. Robin, and J. Safranek, “Model Calibration and Symmetry Restoration of the Advanced Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP069L, pp. 971-973.
[n] A. Sukhanov et al., “Cold test results of pre-production PIP-II SSR2 cavities with high-power couplers in the Fermilab Spoke Test Cryostat”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 161-163. doi:10.18429/JACoW-LINAC2024-MOPB050
[n] D. H. Han, Y. S. Kim, and M. Kwon, “Coupling Impedance Measurement of Pohang Light Source Storage Ring Vacuum Components”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP100G, pp. 1093-1095.
[n] K. Zenker, M. Justus, and R. Steinbrück, “DALI Control System Considerations”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 547-551. doi:10.18429/JACoW-ICALEPCS2023-TUPDP022
[n] A. Samoshkin, D. Gudkov, A. Solodko, and G. Riddone, “CLIC Two-Beam Module for the CLIC Conceptual Design and Related Experimental Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC008, pp. 1003-1005.
[n] A. Zholents and M. Zolotorev, “An Amplifier for Optical Stochastic Cooling”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V031, pp. 1804-1806.
[n] L. Vega Cid et al., “Seamless 1.3 GHz Copper Cavities for Nb Coatings: Cold Test Results of Two Different Approaches”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 498. doi:10.18429/JACoW-SRF2021-TUPTEV009
[n] C. Liu, E. Nanni, E. Snively, K. Kim, and R. Herbst, “Next generation direct RF sampling LLRF control and monitoring system for linear accelerators”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 199-205. doi:10.18429/JACoW-ICALEPCS2025-MODR005
[n] C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2240-2243. doi:10.18429/JACoW-IPAC2024-WEPG22
[n] D. Belohrad et al., “The Digital Signal Processing Chain of the CERN LIU BWS”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 288-292. doi:10.18429/JACoW-IBIC2023-TUP044
[n] J. E. Baader and S. Casalbuoni, “Pulsed Wire Magnetic Field Measurement System for Short-Period Long Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2903-2906. doi:10.18429/JACoW-IPAC2021-WEPAB126
[n] K. Skoufaris, C. Carli, D. Schulte, and P. Raimondi, “First design of a 10 TeV centre of mass energy muon collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 690-693. doi:10.18429/JACoW-IPAC2023-MOPL064
[n] N. Kuklev, M. Borland, G. I. Fystro, H. Shang, and Y. Sun, “Online Accelerator Tuning with Adaptive Bayesian Optimization”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 842-845. doi:10.18429/JACoW-NAPAC2022-THXD4
[n] J. A. MacLachlan and J. Griffin, “Application of a New Scheme for Passing through Transition Energy to the Fermilab Main RIng and Main Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2826-2829.
[n] H. Park, J. Yoon, E. Kako, E.-S. Kim, and J. Han, “Investigation of the fabrication method for the 3rd harmonic superconducting double-cell cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3053-3055. doi:10.18429/JACoW-IPAC2023-WEPA176
[n] J. Wei et al., “RHIC Sextant Test - Physics and Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B006, pp. 69-71.
[n] E. A. Bekhtenev, V. P. Cherepanov, G. V. Karpov, V. B. Reva, E. Shubin, and D. N. Skorobogatov, “Beam Position Monitor System for 2 MeV Electron Cooler for COSY”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD028, pp. 608-610.
[n] Y. Jiao et al., “Progress of physics studies and beam commissioning of the High Energy Photon Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1290-1293. doi:10.18429/JACoW-IPAC2024-TUPG31
[n] N. Kuklev and M. Borland, “Improved symplectic particle tracking for modern vectorized architectures”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPR51, unpublished.
[n] Y. K. Kim, “Towards the Globatron for Tomorrow”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper TUXX02, unpublished.
[n] R. Tighe and P. Corredoura, “RF Feedback Simulation Results for PEP-II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ03, pp. 2666-2668.
[n] A. Ullattuparambil et al., “Picometer-scale emittance and space charge effects in nanostructured photocathodes”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 317-321. doi:10.18429/JACoW-NAPAC2025-TUBN03
[n] J. Safranek, G. Portmann, and A. Terebilo, “MATLAB-BASED LOCO”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE003, pp. 1184-1186.
[n] S. Virostek, D. Oshatz, and J. W. Staples, “A Thermal Analysis Model for High Power Density Beam Stops”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH153, pp. 1577-1579.
[n] X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 16-19. doi:10.18429/JACoW-HIAT2025-MOB03
[n] J. L. Li, P. Piot, and R. Tikhoplav, “Production of Transverse Controllable Laser Density Distribution in Fermilab/NICADD Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP043, pp. 2783-2785.
[n] M. Mapes et al., “A Summary and Status of the SNS Ring Vacuum Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE046, pp. 2929-2931.
[n] L. Maunoury et al., “SPIRAL1: A Versatile User Facility”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 29-33. doi:10.18429/JACoW-ECRIS2018-MOC4
[n] J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1260-1263. doi:10.18429/JACoW-IPAC2021-MOPAB418
[n] P. J. Chou et al., “The Design Improvement of Horizontal Stripline Kicker in TPS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1961-1963. doi:10.18429/JACoW-IPAC2017-TUPIK105
[n] J. S. Berg, E. Forest, R. L. Warnock, and R. D. Ruth, “Full-Turn Symplectic Map from a Generator in a Fourier-Spline Basis”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 291-294.
[n] V. Grattoni, J. E. Baader, and S. Casalbuoni, “Superconducting Phase Shifter Design for the Afterburner at the European XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3823-3826. doi:10.18429/JACoW-IPAC2021-THPAB036
[n] D. R. Welch et al., “Breakdown in Pressurized RF Cavities”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP066, pp. 945-947.
[n] E. Echeverria, A. Flint, A. Galdi, and J. Maxson, “Molecular beam epitaxial growth of Sodium Antimonide photocathodes”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1246-1248. doi:10.18429/JACoW-IPAC2025-TUPM040
[n] S. Kondrashev et al., “Laser Ion Source for High Current Injection into Synchrotrons”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI006, pp. 1721-1723.
[n] J.-G. Wang, D. LeBon, R. McBrien, and T. Hunter, “Characterization of a SNS Transfer Line Dipole”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO038, pp. 2388-2390.
[n] P. Michel, W. Seidel, G. Staats, J. Teichert, R. Wuensch, and U. Lehnert, “First Experiences with the FIR-FEL at ELBE”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH036, pp. 97-100.
[n] L. Grubert, N. Barov, B. Cluggish, S. Galkin, and J. S. Kim, “Graphical Front-End and Object-Oriented Design for IonEx, an Ion Extraction Modeling Code”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP053, pp. 3324-3326.
[n] R. Pana and A. Curcio, “Coherent Difraction Radiation for Longitudinal Electron Beam Characteristics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 291-293. doi:10.18429/JACoW-IBIC2022-TUP28
[n] E. V. Domarov et al., “The Utilization of Standard DC Accelerator ELV for The Tomography”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB15, pp. 186-188.
[n] I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
[n] B. Epsztein and D. T. Tran, “Triperiodic Structure”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-2, pp. 457-470.
[n] P. Korysko et al., “Methods for VHEE/FLASH Radiotherapy Studies and High Dose Rate Dosimetry at the CLEAR User Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 758-761. doi:10.18429/JACoW-LINAC2022-THPOPA06
[n] D. Edstrom et al., “IOTA Proton Injector Beamline Installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1737-1739. doi:10.18429/JACoW-IPAC2023-TUPA183
[n] F. P?®rez et al., “ALBA II Acelerator Upgrade Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1467-1470. doi:10.18429/JACoW-IPAC2022-TUPOMS027
[n] N. Kuklev, A. Romanov, A. Valishev, and J. Wieland, “New results of nonlinear quasi-integrable lattice studies”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM115, unpublished.
[n] R. Hrovatin et al., “Advancements of ELBE timing system upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4128-4130. doi:10.18429/JACoW-IPAC2023-THPA070
[n] M. Justus et al., “Machine Protection System Upgrade for a New Timing System at ELBE”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 542-546. doi:10.18429/JACoW-ICALEPCS2023-TUPDP021
[n] J. Corbett, R. Hettel, D. Keeley, and D. Mostowfi, “Digital Orbit Feedback Compensation for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ21, pp. 2714-2716.
[n] P. Anisimov, E. Simakov, H. Xu, J. Rosenzweig, J. Maxson, and M. Kaemingk, “Multi-objective genetic optimization of high charge TopGun photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 840-843. doi:10.18429/JACoW-IPAC2024-MOPS55
[n] J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
[n] S. Allison, N. Spencer, K. Underwood, D. VanOlst, and M. Zelanzy, “MPS VAX Monitor and control Software Architecture”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1884-1887.
[n] P. Saha, O. Chubenko, S. S. Karkare, and H. A. Padmore, “Photoluminescence Studies of Alkali-Antimonide Photocathodes”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 188-191. doi:10.18429/JACoW-NAPAC2019-MOPLH09
[n] R. Pana, A. Curcio, and A. I. Wawrzyniak, “LUMOS: A Visible Diagnostic Beamline for the Solaris Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3901-3903. doi:10.18429/JACoW-IPAC2021-THPAB064
[n] Y. S. Kim et al., “New Design of the KIRAMS-13 Cyclotron for Regional Cyclotron Center”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13008, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Levenson et al., “Alternative negative electron affinity activation studies at HERACLES”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR80, pp. 638-641.
- J. Jarvis, A. Mondal, A. Romanov, J. Ruan, M. Wallbank, and V. Lebedev, “New advances in optical stochastic cooling”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOZD1, unpublished.
- N. Kuklev, H. Shang, L. Emery, M. Borland, and Y. Sun, “Physics-coupled Bayesian algorithm for APS-U nonlinear dynamics tuning”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOP074, unpublished.
- A. Anoshin et al., “A NEW INJECTION SYSTEM FOR KURCHATOV SOURCE OF SR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU01, pp. XX-XX.
- L. Ponce et al., “ELENA - From Commissioning to Operation”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2391-2394.
- R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA035, pp. 2727-2730.
- S. Myers, “Beam-Beam Simulation for LEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2503-2506.
- D. Xu, J. Berg, S. Peggs, and V. Ptitsyn, “Lattice design for Low Energy Cooling in EIC HSR-IR2”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 496-499.
- L. Maindive et al., “Continuous integration on top of the existing control system of LIPAc, for a RF conditioning test bench”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 366-372.
- X. Huang, A. Zholents, and J. Safranek, “Obtaining picosecond x-ray pulses on fourth generation synchrotron light sources”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM062, unpublished.
- B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2925-2927.
- A. Moretti, M. Popovic, E. S. M. McCrory, F. G. Garcia, and T. K. Kroc, “Continued Monitoring of the Conditioning of the Fermilab Linac 805 MHz Cavities”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP029, pp. 464-466.
- D. A. Turner et al., “Flux Expulsion Lens: Concept and Measurements”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB003, pp. 56-61.
- A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEIXA03, pp. 627-633.
- G. Hallilingaiah, A. Arnold, S. Gatzmaga, P. Murcek, J. Teichert, and R. Xiang, “Preliminary results of electromagnetic simulation for optimizing an SRF gun cavity”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP57, unpublished.
- W. L. Millar, G. Burt, and W. Wuensch, “Monte Carlo Model of High-Voltage Conditioning and Operation”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 283-286.
- M. Kaemingk, P. Anisimov, E. Simakov, and H. Xu, “Update on multi-objective genetic optimizations of the photoinjector for CARIE”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS113, pp. 2439-2442.
- R. Mercado et al., “Motion control systems for insertion devices in Diamond-II”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 518-523.
- J. Safranek, O. Singh, and L. Solomon, “Orbit Stability Improvements at the NSLS X-Ray Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ19, pp. 2711-2713.
- B. Aksel and K. Leung, “Cooldown Stresses on the Coldmass of SSC Dipole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2200-2203.
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, pp. 1075-1078.
- N. Kuklev et al., “ML-enhanced commissioning of the APS-U accelerator complex”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS50, pp. 1778-1781.
- K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC43, pp. 2060-2063.
- S. M. Chung, C. D. Park, S. H. Gu, and M. Kwon, “Beam-Gas Lifetime in a Low Emittance, Medium-Energy Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA120, pp. 1357-1359.
- D. Francescone et al., “On the Betatron radiation in cylindrically symmetric plasma-ion channels”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL182, pp. 2170-2173.
- C. Adolphsen, K. L. F. Bane, and K. A. Thompson, “Multibunch Beam Break-Up in Detuned Structures”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3342-3345.
- N. Kuklev, A. Romanov, J. Jarvis, M. Wallbank, and N. Banerjee, “Facility-scale differentiable virtual accelerator at Fermilab”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 106-110.
- S. Myers, “Effect of Reactive Feedback on the Transverse Mode Coupling Instability Using the Few-Particles Model and Simulation”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2341-2344.
- H. Lovelace III et al., “An update on the transition crossing schemes for the EIC hadron storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS03, pp. 1630-1633.
- L. T. Sun et al., “FECR Ion Source Development and Challenges”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO01, pp. 1-5.
- J. J. Error, D. R. Bruce, J. J. Fazekas, S. A. Helus, and J. R. Maines, “Deformation Monitoring of the Spallation Neutron Source (SNS) Tunnels”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE037, pp. 2509-2511.
- B. Muratori and J. Jones, “RUEDI microscopy: solenoids or quadrupoles?”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL062, pp. 3256-3259.
- F. Marti, J. Griffin, and V. Taivassalo, “Design of the Axial Injection System for the NSCL Cyclotrons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2450-2453.
- M. Bartolini, L. R. Brederode, M. Deegan, M. Miccolis, N. P. Rees, and J. Santander-Vela, “Scaling Agile for the Square Kilometre Array”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1080.
- G. Bellomo and L. Serafini, “Design of the Central Region for Axial Injection in the Milan Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-11, pp. 507-510.
- S. Kim, H. S. Kang, M. H. Chun, J. S. Yang, and S. H. Nam and Y, “HIGH POWER RF SYSTEM AND ITS UPGRADE PLAN FOR THE PLS STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP005, pp. XX-XX.
- D. P. Siddons and Z. Yin, “Secure Remote Operations of NSLS Beamlines with (Free)NX”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB11, pp. 421-423.
- H. Nishiumura, G. Portmann, D. Robin, and J. Safranek, “Model Calibration and Symmetry Restoration of the Advanced Light Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP069L, pp. 971-973.
- A. Sukhanov et al., “Cold test results of pre-production PIP-II SSR2 cavities with high-power couplers in the Fermilab Spoke Test Cryostat”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 161-163.
- D. H. Han, Y. S. Kim, and M. Kwon, “Coupling Impedance Measurement of Pohang Light Source Storage Ring Vacuum Components”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP100G, pp. 1093-1095.
- K. Zenker, M. Justus, and R. Steinbrück, “DALI Control System Considerations”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP022, pp. 547-551.
- A. Samoshkin, D. Gudkov, A. Solodko, and G. Riddone, “CLIC Two-Beam Module for the CLIC Conceptual Design and Related Experimental Program”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC008, pp. 1003-1005.
- A. Zholents and M. Zolotorev, “An Amplifier for Optical Stochastic Cooling”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V031, pp. 1804-1806.
- L. Vega Cid et al., “Seamless 1.3 GHz Copper Cavities for Nb Coatings: Cold Test Results of Two Different Approaches”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 498.
- C. Liu, E. Nanni, E. Snively, K. Kim, and R. Herbst, “Next generation direct RF sampling LLRF control and monitoring system for linear accelerators”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 199-205.
- C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG22, pp. 2240-2243.
- D. Belohrad et al., “The Digital Signal Processing Chain of the CERN LIU BWS”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP044, pp. 288-292.
- J. E. Baader and S. Casalbuoni, “Pulsed Wire Magnetic Field Measurement System for Short-Period Long Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2903-2906.
- K. Skoufaris, C. Carli, D. Schulte, and P. Raimondi, “First design of a 10 TeV centre of mass energy muon collider”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL064, pp. 690-693.
- N. Kuklev, M. Borland, G. I. Fystro, H. Shang, and Y. Sun, “Online Accelerator Tuning with Adaptive Bayesian Optimization”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 842-845.
- J. A. MacLachlan and J. Griffin, “Application of a New Scheme for Passing through Transition Energy to the Fermilab Main RIng and Main Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2826-2829.
- H. Park, J. Yoon, E. Kako, E.-S. Kim, and J. Han, “Investigation of the fabrication method for the 3rd harmonic superconducting double-cell cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA176, pp. 3053-3055.
- J. Wei et al., “RHIC Sextant Test - Physics and Performance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B006, pp. 69-71.
- E. A. Bekhtenev, V. P. Cherepanov, G. V. Karpov, V. B. Reva, E. Shubin, and D. N. Skorobogatov, “Beam Position Monitor System for 2 MeV Electron Cooler for COSY”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD028, pp. 608-610.
- Y. Jiao et al., “Progress of physics studies and beam commissioning of the High Energy Photon Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG31, pp. 1290-1293.
- N. Kuklev and M. Borland, “Improved symplectic particle tracking for modern vectorized architectures”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR51, unpublished.
- Y. K. Kim, “Towards the Globatron for Tomorrow”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper TUXX02, unpublished.
- R. Tighe and P. Corredoura, “RF Feedback Simulation Results for PEP-II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ03, pp. 2666-2668.
- A. Ullattuparambil et al., “Picometer-scale emittance and space charge effects in nanostructured photocathodes”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 317-321.
- J. Safranek, G. Portmann, and A. Terebilo, “MATLAB-BASED LOCO”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE003, pp. 1184-1186.
- S. Virostek, D. Oshatz, and J. W. Staples, “A Thermal Analysis Model for High Power Density Beam Stops”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH153, pp. 1577-1579.
- X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOB03, pp. 16-19.
- J. L. Li, P. Piot, and R. Tikhoplav, “Production of Transverse Controllable Laser Density Distribution in Fermilab/NICADD Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP043, pp. 2783-2785.
- M. Mapes et al., “A Summary and Status of the SNS Ring Vacuum Systems”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE046, pp. 2929-2931.
- L. Maunoury et al., “SPIRAL1: A Versatile User Facility”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 29-33.
- J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1260-1263.
- P. J. Chou et al., “The Design Improvement of Horizontal Stripline Kicker in TPS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1961-1963.
- J. S. Berg, E. Forest, R. L. Warnock, and R. D. Ruth, “Full-Turn Symplectic Map from a Generator in a Fourier-Spline Basis”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 291-294.
- V. Grattoni, J. E. Baader, and S. Casalbuoni, “Superconducting Phase Shifter Design for the Afterburner at the European XFEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3823-3826.
- D. R. Welch et al., “Breakdown in Pressurized RF Cavities”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP066, pp. 945-947.
- E. Echeverria, A. Flint, A. Galdi, and J. Maxson, “Molecular beam epitaxial growth of Sodium Antimonide photocathodes”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM040, pp. 1246-1248.
- S. Kondrashev et al., “Laser Ion Source for High Current Injection into Synchrotrons”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI006, pp. 1721-1723.
- J.-G. Wang, D. LeBon, R. McBrien, and T. Hunter, “Characterization of a SNS Transfer Line Dipole”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO038, pp. 2388-2390.
- P. Michel, W. Seidel, G. Staats, J. Teichert, R. Wuensch, and U. Lehnert, “First Experiences with the FIR-FEL at ELBE”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH036, pp. 97-100.
- L. Grubert, N. Barov, B. Cluggish, S. Galkin, and J. S. Kim, “Graphical Front-End and Object-Oriented Design for IonEx, an Ion Extraction Modeling Code”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP053, pp. 3324-3326.
- R. Pana and A. Curcio, “Coherent Difraction Radiation for Longitudinal Electron Beam Characteristics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 291-293.
- E. V. Domarov et al., “The Utilization of Standard DC Accelerator ELV for The Tomography”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB15, pp. 186-188.
- I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
- B. Epsztein and D. T. Tran, “Triperiodic Structure”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-2, pp. 457-470.
- P. Korysko et al., “Methods for VHEE/FLASH Radiotherapy Studies and High Dose Rate Dosimetry at the CLEAR User Facility”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 758-761.
- D. Edstrom et al., “IOTA Proton Injector Beamline Installation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA183, pp. 1737-1739.
- F. P?®rez et al., “ALBA II Acelerator Upgrade Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1467-1470.
- N. Kuklev, A. Romanov, A. Valishev, and J. Wieland, “New results of nonlinear quasi-integrable lattice studies”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM115, unpublished.
- R. Hrovatin et al., “Advancements of ELBE timing system upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA070, pp. 4128-4130.
- M. Justus et al., “Machine Protection System Upgrade for a New Timing System at ELBE”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP021, pp. 542-546.
- J. Corbett, R. Hettel, D. Keeley, and D. Mostowfi, “Digital Orbit Feedback Compensation for SPEAR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ21, pp. 2714-2716.
- P. Anisimov, E. Simakov, H. Xu, J. Rosenzweig, J. Maxson, and M. Kaemingk, “Multi-objective genetic optimization of high charge TopGun photoinjector”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS55, pp. 840-843.
- J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
- S. Allison, N. Spencer, K. Underwood, D. VanOlst, and M. Zelanzy, “MPS VAX Monitor and control Software Architecture”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1884-1887.
- P. Saha, O. Chubenko, S. S. Karkare, and H. A. Padmore, “Photoluminescence Studies of Alkali-Antimonide Photocathodes”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 188-191.
- R. Pana, A. Curcio, and A. I. Wawrzyniak, “LUMOS: A Visible Diagnostic Beamline for the Solaris Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3901-3903.
- Y. S. Kim et al., “New Design of the KIRAMS-13 Cyclotron for Regional Cyclotron Center”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP13008, pp. XX-XX.
Back to search