Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365.
[n] W. T. Milner et al., “Transport of DC and Bunched Beams Through a 25 mV Folded Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1697-1702.
[n] R. L. Gluckstern, “Effect of Errors in Repetitive Structures”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 5-02, pp. 190-195.
[n] B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
[n] C. Jamet et al., “SPIRAL2 Diagnostic Qualifications with RFQ beams”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 188-192. doi:10.18429/JACoW-IBIC2019-MOPP036
[n] S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
[n] P. Korysko et al., “Updates, Status and Experiments of CLEAR, the CERN Linear Electron Accelerator for Research”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3022-3025. doi:10.18429/JACoW-IPAC2022-THPOMS030
[n] S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2865-2868.
[n] R. Johnson, “Stanford Linear Collider History Data Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1716-1719.
[n] S. Park et al., “Status of RF Photoinjector and PWT Linac at UCLA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-75, pp. 528-530.
[n] J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300.
[n] F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
[n] S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469.
[n] D. Winklehner et al., “High Power Cyclotrons for Neutrino Experiments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 788-790. doi:10.18429/JACoW-IPAC2014-MOPRI078
[n] D. Li, G. Lambertson, and W. C. Turner, “Broadband Impedance Calculations of the TAN Vacuum Chamber for the Large Hadron Collider (LHC)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH078, pp. 1847-1849.
[n] F. Hamme, U. Becker, and P. Hammes, “Simulation of Secondary Electron Emission with CST Particle Studio(TM)”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUAPMP04, pp. 160-163.
[n] V. Kain et al., “Slow extracted spill ripple control in the CERN SPS using adaptive Bayesian optimisation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1790-1793. doi:10.18429/JACoW-IPAC2024-TUPS55
[n] P. B. Wilson, “Development and Advances in Conventional High Power RF Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE04, pp. 1483-1488.
[n] W. Wuensch and I. Wilson, “Multibinching Studies for CLIC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 641-644.
[n] S. Shen, K. Kishiyama, J. M. Parker, N. G. Wilson, and D. Schrage, “APT/LEDA RFQ Vacuum Pumping System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P017, pp. 3625-3627.
[n] R. J. Michnoff et al., “A Wire Scanner System for Characterizing the BNL Energy Recovery Linac Beam Position Monitor System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG026, pp. 89-91.
[n] W. Manwaring, “Ramping Controls for the IUCF Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1258-1261.
[n] S. Myers, “The Performance of LEP and Future Developments”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 13-18.
[n] J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
[n] M. N. Nguyen and R. L. Cassel, “High Power Switch for the SMTF Modulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS044, pp. 2445-2447.
[n] J. D. Mammosser et al., “Fabrication and Testing of Deflecting Cavities for APS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOA03, pp. 1170-1175.
[n] P. I. Reinhardt-Nickoulin, S. Bragin, A. Feschenko, S. A. Gavrilov, I. V. Vasilyev, and O. Volodkevich, “Beam Parameters Measurements by Ionization Cross Section Monitor on Proton LINAC of INR RAS”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD49, pp. 161-163.
[n] R. Ferdinand, P.-E. Bernaudin, M. Di Giacomo, P. Bosland, Y. G??mez Mart?¡nez, and G. Olry, “Status and Challenges of Spiral2 SRF Linac”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOIOA02, pp. 11-17.
[n] W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
[n] O. Volodkevich et al., “Use of Fast Magnetic Beam Raster System for INR Isotope Production Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC45, pp. 426-428.
[n] J. H. Lee, P. J. Rodriguez, J. Ricks, and N. Us Saqib, “Cost-effective asset management for accelerator control systems: design and implementation for the ALS-U controls system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3289-3291. doi:10.18429/JACoW-IPAC2024-THPG18
[n] S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
[n] D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n] I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365.
- W. T. Milner et al., “Transport of DC and Bunched Beams Through a 25 mV Folded Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1697-1702.
- R. L. Gluckstern, “Effect of Errors in Repetitive Structures”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 5-02, pp. 190-195.
- B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
- C. Jamet et al., “SPIRAL2 Diagnostic Qualifications with RFQ beams”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 188-192.
- S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
- P. Korysko et al., “Updates, Status and Experiments of CLEAR, the CERN Linear Electron Accelerator for Research”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3022-3025.
- S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2865-2868.
- R. Johnson, “Stanford Linear Collider History Data Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1716-1719.
- S. Park et al., “Status of RF Photoinjector and PWT Linac at UCLA”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-75, pp. 528-530.
- J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300.
- F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
- S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469.
- D. Winklehner et al., “High Power Cyclotrons for Neutrino Experiments”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 788-790.
- D. Li, G. Lambertson, and W. C. Turner, “Broadband Impedance Calculations of the TAN Vacuum Chamber for the Large Hadron Collider (LHC)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH078, pp. 1847-1849.
- F. Hamme, U. Becker, and P. Hammes, “Simulation of Secondary Electron Emission with CST Particle Studio(TM)”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUAPMP04, pp. 160-163.
- V. Kain et al., “Slow extracted spill ripple control in the CERN SPS using adaptive Bayesian optimisation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS55, pp. 1790-1793.
- P. B. Wilson, “Development and Advances in Conventional High Power RF Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE04, pp. 1483-1488.
- W. Wuensch and I. Wilson, “Multibinching Studies for CLIC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 641-644.
- S. Shen, K. Kishiyama, J. M. Parker, N. G. Wilson, and D. Schrage, “APT/LEDA RFQ Vacuum Pumping System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P017, pp. 3625-3627.
- R. J. Michnoff et al., “A Wire Scanner System for Characterizing the BNL Energy Recovery Linac Beam Position Monitor System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG026, pp. 89-91.
- W. Manwaring, “Ramping Controls for the IUCF Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1258-1261.
- S. Myers, “The Performance of LEP and Future Developments”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 13-18.
- J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
- M. N. Nguyen and R. L. Cassel, “High Power Switch for the SMTF Modulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS044, pp. 2445-2447.
- J. D. Mammosser et al., “Fabrication and Testing of Deflecting Cavities for APS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOA03, pp. 1170-1175.
- P. I. Reinhardt-Nickoulin, S. Bragin, A. Feschenko, S. A. Gavrilov, I. V. Vasilyev, and O. Volodkevich, “Beam Parameters Measurements by Ionization Cross Section Monitor on Proton LINAC of INR RAS”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD49, pp. 161-163.
- R. Ferdinand, P.-E. Bernaudin, M. Di Giacomo, P. Bosland, Y. G??mez Mart?¡nez, and G. Olry, “Status and Challenges of Spiral2 SRF Linac”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOIOA02, pp. 11-17.
- W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
- O. Volodkevich et al., “Use of Fast Magnetic Beam Raster System for INR Isotope Production Facility”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC45, pp. 426-428.
- J. H. Lee, P. J. Rodriguez, J. Ricks, and N. Us Saqib, “Cost-effective asset management for accelerator control systems: design and implementation for the ALS-U controls system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG18, pp. 3289-3291.
- S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
- D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 124-127.
- I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
Back to search