JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. Asova et al., “Status of the Photo Injector Test Facility at DESY, Zeuthen Site (PITZ)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE010, pp. 2164-2166. 
[n]	M. Parro, F. Arranz, B. Brañas, D. Iglesias, and D. Rapisarda, “Recent Developments on the IFMIF/EVEDA Beam Dump Cooling Circuit”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS044, pp. 1632-1634. 
[n]	H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413. 
[n]	R. Leewe and K. Fong, “Simulation Analysis of Lorentz Force Induced Oscillations in RF Cavities in Vector Sum and Cw Operation”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1078-1081. doi:10.18429/JACoW-SRF2019-THP076
[n]	J. Knobloch and H. Padamsee, “Microscopic Investigation of Field Emitters Located by Thermometry in 1.5 GHz Superconducting Niobium Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B03, pp. 95-103. 
[n]	H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275. 
[n]	T. Galek, K. Brackebusch, Sh. Gorgi Zadeh, and U. van Rienen, “Study of Higher Order Modes in Multi-Cell Cavities for BESSY-VSR Upgrade”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 412-414. doi:10.18429/JACoW-IPAC2014-MOPME017
[n]	Y. Z. Wu, “Beijing Tau-Charm Factory Design Study”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B011, pp. 321-323. 
[n]	L. Hagge, S. Eucker, B. List, N. J. Walker, and N. Welle, “Organizing the ILC Technical Design Documentation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS055, pp. 1656-1658. 
[n]	S. D. R?ñdel et al., “Status and Future Perspective of the TRIUMF E-Linac”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 70-73. doi:10.18429/JACoW-ERL2019-WEPNEC01
[n]	M. Ikegami et al., “Beam Loss Mitigation in J-PARC Linac after the Tohoku Earthquake”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB096, pp. 401-403. 
[n]	H. X. Deng et al., “Status of Non-destructive Bunch Length Measurement based on Coherent Cherenkov Radiation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME049, pp. 583-585. 
[n]	V. Chohan et al., “Testing of the LHC Magnets in Cryogenic Conditions: Current Experience and Near Future Outlook”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT014, pp. 560-562. 
[n]	D. Kleinjan, “Arc and Convertor Current Transient Studies for Multi-cusp Cesiated Surface Conversion H? Source at Lansce”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1983-1985. doi:10.18429/JACoW-IPAC2019-TUPTS025
[n]	H. Jin, Y. Choi, and S. Lee, “Progress and Plan of the Fast Protection System in the RAON Accelerator”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 296-298. doi:10.18429/JACoW-HB2018-WEP2PO015
[n]	I. A. Miloichikova, A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, and S. Stuchebrov, “Geant4 Based Numerical Model of Accelerator for Simulation of High Energy Therapeutic Electron Beam Parameters”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA38, unpublished. 
[n]	V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n]	A. Gonzalez, T. Maruta, P. Ostroumov, A. Plastun, K. Fukushima, and J. Wan, “Transverse beam dynamics studies in the FRIB accelerating cryomodules”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 618-621. doi:10.18429/JACoW-NAPAC2025-TUP102
[n]	M. Patil et al., “Status and upgrade of the visible light diagnostics port for energy spread measurements at KARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4764-4767. doi:10.18429/JACoW-IPAC2023-THPL123
[n]	K. Hwang and J. Qiang, “FEL Simulation Using the Lie Method”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 240-245. doi:10.18429/JACoW-ICAP2018-TUPAF22
[n]	M. G. Ibison et al., “Optical System Design for The ESS Proton Beam and Target Diagnostics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 347-349. doi:10.18429/JACoW-IPAC2016-MOPMR043
[n]	M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Compact Photon Source”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 212-214. doi:10.18429/JACoW-LINAC2016-MOPLR035
[n]	P. Stabile et al., “Beam Position Monitor Electronics Upgrade for Fermilab Switchyard”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF19, pp. 365-368. 
[n]	B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208. 
[n]	I. Arredondo and J. Jugo, “Containerized Control Structure for Accelerators”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 816-821. doi:10.18429/JACoW-ICALEPCS2017-TUPHA170
[n]	J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343. 
[n]	J. Peters, “Review of Negative Hydrogen Ion Sources High Brightness/High Current”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper FR1003, pp. 1031-1035. 
[n]	J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625. 
[n]	V. Kain et al., “High Intensity Commissioning of the SPS LSS4 Extraction for CNGS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN096, pp. 1604-1606. 
[n]	E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658. 
[n]	G. Franchetti, J. Struckmeier, K. Aulenbacher, and F. Zimmermann, “The Extreme Beams Initiative in EuCARD-2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 483-485. doi:10.18429/JACoW-IPAC2015-MOPJE073
[n]	S. Sapkota, D. Posthuma de Boer, and E. Yamakawa, “Development of a Faraday cup for the FETS-FFA”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 208-212. doi:10.18429/JACoW-IBIC2025-MOPMO14
[n]	K. W. Shepard, P. N. Potukuchi, and A. Roy, “Niobium Coaxial Quarter-Wave Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-89, pp. 287-289. 
[n]	D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2088-2090. doi:10.18429/JACoW-IPAC2014-WEPRO061
[n]	D. J. Crawford et al., “First Beam and High-Gradient Cryomodule Commissioning Results of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1831-1833. doi:10.18429/JACoW-IPAC2015-TUPJE080
[n]	V. Zvyagintsev, R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, and Z. Y. Yao, “Coupler Design for RISP Spoke Cavity”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 372-374. doi:10.18429/JACoW-RUPAC2018-WEPSB47
[n]	E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 325-327. doi:10.18429/JACoW-FEL2019-WEP004
[n]	F. Christie, J. R?Ânsch-Schulenburg, and M. Vogt, “A PolariX TDS for the FLASH2 Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 328-331. doi:10.18429/JACoW-FEL2019-WEP006
[n]	S. K. Patch, B. M. Brahim, and D. Santiago-Gonzalez, “Robust Thermoacoustic Range Verification for Pulsed Ion Beam Therapy”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 294-297. doi:10.18429/JACoW-NAPAC2019-TUXBA3
[n]	D. Sun, P. Datte, F. R. Huson, and W. W. MacKay, “RF Breakdown Test of SiO2 Coated Copper Electrodes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 736-739. 
[n]	A. V. Shemchuk et al., “Magnetic Measurement System For The NICA Quadrupole Magnets”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 559-562. doi:10.18429/JACoW-RUPAC2016-THPSC010
[n]	F. Hug et al., “Cryogenic Installations for Module Tests at Mainz”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 997-1002. doi:10.18429/JACoW-SRF2019-THP054
[n]	F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2853-2855. doi:10.18429/JACoW-IPAC2015-WEPMA041
[n]	M. Fan, Z. Liptak, C. Wang, and Y. Wei, “Design of an online adjustable waveguide coupler for the TM020-mode cavity of proposed STCF”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1944-1947. doi:10.18429/JACoW-IPAC2025-WEPB113
[n]	T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463. 
[n]	M. Labat, M. El Ajjouri, N. Hubert, D. Pedeau, M. Ribbens, and M.-A. Tordeux, “AXD Measurements at SOLEIL”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 209-212. doi:10.18429/JACoW-IBIC2016-MOPG61
[n]	R. K. Bhandari and A. S. Divatia, “Design Aspects of an External Injection System for VEC, Calcutta”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B41, pp. 165-168. 
[n]	D. M. Dykes et al., “The Economic Optimisation of the Main Parameters of the 3 GeV Electron Booster Synchrotron for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B05, pp. 657-659. 
[n]	S. M. Polozov et al., “New Superconducting Linac Injector Project for Nuclotron-Nica: Current Results”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 627-629. doi:10.18429/JACoW-RUPAC2016-THPSC041
[n]	D. H. Zhuang et al., “Improved Capacitive Coupling Type RF Power Couplers for a Cryomodule With Two 9-Cell Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB079, pp. 1313-1315. 
[n]	R. E. Pollock et al., “Infllection and Extraction Systems at the Indiana University Clyclotron Facility”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1094-1097. 
[n]	A. Plastun, T. Kanemura, and X. Wang, “Heavy ion implantation analysis in graphite for the FRIB charge selector”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 769-773. doi:10.18429/JACoW-NAPAC2025-WEP042
[n]	R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581. 
[n]	N. Hu, Z. H. Bai, W. Li, Q. Luo, and L. Wang, “Estimates of Collective Effects in the HALS Storage Ring Having the First Version Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3770-3773. doi:10.18429/JACoW-IPAC2017-THPAB032
[n]	B. Giaccone et al., “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1231-1238. doi:10.18429/JACoW-SRF2019-FRCAB7
[n]	A. M. Kolano, R. J. Barlow, A. Adelmann, and C. Baumgarten, “A Precise Beam Dynamics Model of the PSI Injector 2 to Estimate the Intensity Limit”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1630-1631. doi:10.18429/JACoW-IPAC2014-TUPRI031
[n]	F. V. Podgorny, “DESIGN OF LOAD ÔÇô KLYSTRON EQUIVALENT FOR JLC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THCP06, pp. XX-XX. 
[n]	A. Fornara et al., “First proton crabbing at the LHC via head-on beam-beam interaction”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2317-2320. doi:10.18429/JACoW-IPAC2025-WEPS036
[n]	B. I. Grishanov and F. V. Podgorny, “INJECTION SYSTEM TO DAMPING RING OF AN ELECTRON-POSITRON INJECTION COMPLEX VEPP5”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THCP05, pp. XX-XX. 
[n]	G. R. Bower, R. Arnold, N. Sinev, Y. Sugimoto, and M. Woods, “Disruption of Particle Detector Electronics by Beam Generated EMI”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS041, pp. 3094-3096. 
[n]	M. Bartsch et al., “MAFIA Release 3.x”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU426, pp. 372-374. 
[n]	L. Celona et al., “A Compact Multiply Charged Ion Source for Hadrontherapy Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2563-2565. doi:10.18429/JACoW-IPAC2015-WEPWA031
[n]	S. M. Pattalwar, R. Bate, R. K. Buckley, B. D. Fell, A. R. Goulden, and P. A. McIntosh, “SRF Cryomodule and Cryogenics Developments for the New Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE048, pp. 2251-2253. 
[n]	F. Nolden et al., “Stochastic Cooling Electrodes for a Wide Velocity Range in the CR”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP002, pp. 799-801. 
[n]	H. Tomizawa, H. Dewa, A. Mizuno, and T. Taniuchi, “First Observation of Photoemission Enhancement from Copper Cathode Illuminated by Z-Polarized Laser Pulse”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB068, pp. 996-998. 
[n]	Y. Song and K. Fan, “A THz-Driven Split Ring Resonator for Temporal Characterization of Femtosecond MeV Electron Beam”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 250-253. doi:10.18429/JACoW-IBIC2020-THPP22
[n]	K. Nakajima et al., “Experiment of Laser Wake-Field Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 581-584. 
[n]	Y. T. Yan, “A Miniaturized High-Energy Wakefield Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 493-496. 
[n]	T. Stengler, K. Aulenbacher, F. Hug, D. Simon, C. P. Stoll, and S. D. W. Thomas, “Cryomodules for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 56-60. doi:10.18429/JACoW-ERL2019-TUCOZBS06
[n]	S. W. Chang et al., “The cavity combiner development for TPS SSPA tower at NSRRC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1912-1914. doi:10.18429/JACoW-IPAC2025-WEPB083
[n]	B. Liu, “Measurement of magnetic field characteristics using the stretched wire system”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB031, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search