JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	W. Scandale, R. Losito, and A. M. Taratin, “Probability of Inelastic Nuclear Interactions of High-Energy Protons in Aligned Crystal”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD68, pp. 263-265. 
[n]	M. A. Martens et al., “Upgrades to the Fermilab NuMI Beamline”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS028, pp. 1712-1714. 
[n]	J. E. Spencer, “Optimal, Real-Time Control-Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1440-1443. 
[n]	M. Di Giacomo et al., “RF Commissioning of the SPIRAL2 RFQ in CW Mode and Beyond Nominal Field”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2804-2806. doi:10.18429/JACoW-IPAC2019-WEPRB007
[n]	F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-01, pp. 447-453. 
[n]	V. Litvinenko et al., “Progress with FEL-based Coherent Electron Cooling”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THDAU05, pp. 529-532. 
[n]	M. Haj Tahar, F. Meot, L. Calabretta, and A. Calanna, “Design of the Injection into the 800 MeV/amu High Power Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT027, pp. 375-377. 
[n]	J. Simpson, R. Konecny, S. L. Kramer, and D. Suddeth, “Test Facility for Relativistic Beam Pickups”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3648-3651. 
[n]	D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 629-631. doi:10.18429/JACoW-FEL2019-THP016
[n]	E. Pozdeyev et al., “Diagnostics of BNL ERL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS116, pp. 4387-4389. 
[n]	J. Willard, T. Wilson, and W. A. Wurtz, “Compensation Controls for an Elliptically Polarising Undulator”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1658-1662. doi:10.18429/JACoW-ICALEPCS2017-THPHA120
[n]	H. Frese et al., “First Experience with the PETRA Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3379-3382. 
[n]	Y. T. Cheng et al., “Constructing and Installation of TPS Front End”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4007-4009. doi:10.18429/JACoW-IPAC2014-THPRI099
[n]	L. Liao, Q. Gu, M. Zhang, and M. H. Zhao, “RF and Coupler Design of a Micro-Pulse Electron Gun”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH25, pp. 71-73. 
[n]	B. Lorbeer, H. T. Duhme, I. Krouptchenkov, T. Lensch, D. Lipka, and M. Werner, “First Test with MicroTCA Based Cavity BPM Electronics for the European XFEL and FLASH”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 70-73. doi:10.18429/JACoW-IBIC2023-MOP019
[n]	K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530. 
[n]	V. Bookwalter, B. Madre, and C. E. Reece, “Flexible application of the JLab pansophy information system for project reports, process monitoring, and R&D sample tracking”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP49, pp. XX-XX. 
[n]	G. I. Bell, I. Ben-Zvi, D. L. Bruhwiler, Y. S. Derbenev, V. Litvinenko, and A. V. Sobol, “VORPAL Simulations Relevant to Coherent Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC085, pp. 3185-3187. 
[n]	D. G. Ouzounov, I. V. Bazarov, B. M. Dunham, C. K. Sinclair, F. W. Wise, and S. Zhou, “The Laser System for the ERL Electron Source at Cornell University”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS044, pp. 530-532. 
[n]	M. Fan, T. Zhang, and C. Chu, “Beam Transport Line of CIAE Medical Cyclotron and Its Magnetic Elements Design Studies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 306-309. 
[n]	A. Warner et al., “Machine Protection System Research and Development for the Fermilab PIP-II Proton Linac”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1643-1645. doi:10.18429/JACoW-ICALEPCS2017-THPHA110
[n]	A. G. Ruggiero and J. Simpson, “Momentum Precooling in the Debuncher Ring for the Fermilab Tevatron-I Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2599-2601. 
[n]	V. Guidi et al., “Crystal Undulator as a Novel Compact Source of Radiation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB045, pp. 917-919. 
[n]	F. Caspers and G. Dome, “Reciprocity between Pick-up and Kicker Structures including the Far-Field Zone”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1208-1211. 
[n]	G. Kube and M. Werner, “Signal Level Calculation for the PETRA-III Beam Position Monitor System”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB19, pp. 105-107. 
[n]	S. Seth et al., “Test Result of 650 MHz, Beta 0.61 Single-cell Niobium Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 553-557. doi:10.18429/JACoW-SRF2017-TUPB071
[n]	R. Bailey et al., “First Operational Experience with LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 401-403. 
[n]	A. Xiao, T. B. Bolshakov, P. Lebrun, E. S. McCrory, V. Papadimitriou, and A. J. Slaughter, “Tevatron Beam Lifetimes at Injection Using the Shot Data Analysis System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT012, pp. 1279-1281. 
[n]	M. Young, “Simulations of the LEDA RFQ 6.7 MeV Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W024, pp. 2752-2754. 
[n]	F. H. de Sá, L. Liu, and A. R. D. Rodrigues, “Booster Synchrotron for SIRIUS Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP052, pp. 679-681. 
[n]	S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX. 
[n]	D. Butti, E. Bravin, S. M. Gibson, and G. Trad, “Recent LHC SR Interferometer Simulations and Experimental Results”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 88-91. doi:10.18429/JACoW-IBIC2022-MOP23
[n]	A. Bungau, R. J. Barlow, J. R. Alonso, L. M. Bartoszek, J. M. Conrad, and M. Shaevitz, “Neutron Shielding Optimization Studies”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2282-2284. doi:10.18429/JACoW-IPAC2015-TUPWI019
[n]	M. M. Gordon and D. A. Johnson, “Application of a New Field Trimming Program to the MSU Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 298-308. 
[n]	S. L. Bogomolov et al., “178m2Hf and 237Pu Isotopes Production on the U-200 Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IV-04, pp. 167-170. 
[n]	S. H. Kim, C. Doose, K. Kim, R. Hogrefe, and R. Merl, “Magnet Measurement Facility for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2802-2805. 
[n]	A. Blednykh et al., “High Current Limitations for the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD084, pp. 2108-2110. 
[n]	T. Junquera et al., “High Intensity Linac Driver for the SPIRAL-2 Project : Design of Superconducting 88 MHz Quarter Wave Resonators (beta 0.12), Power Couplers and Cryomodules”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT058, pp. 1285-1287. 
[n]	M. Borage, S. Kotaiah, and S. R. Tiwari, “Study and Comparison of Reactive Power Compensation Schemes for Air-Core Transformer in ELV-type DC Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA046, pp. 688-690. 
[n]	S. O. Schriber, “50th Anniversary: Accelerator Conferences in the U.S.”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3668-3672. doi:10.18429/JACoW-IPAC2015-THSMS2
[n]	O. K. Kester et al., “The MSU/NSCL Re-Accelerator ReA3”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOCAU05, pp. 57-61. 
[n]	S. Guiducci, “Background Calculation for the DAFNE Experiments”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP040G, pp. 1365-1367. 
[n]	T. Ota et al., “Development of 1.3 Ghz Single-Cell Superconducting Cavities With Nb Material Developed by Ulba Metallurgical Plant”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 849-851. doi:10.18429/JACoW-LINAC2016-THPLR004
[n]	L. Bizel-Bizellot, M. Ellis, S. M. Pattalwar, M. D. Pendleton, P. A. Smith, and A. E. Wheelhouse, “Innovative Cryogenic Test Facility for Testing SRF Cavity Series Production”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 520-523. doi:10.18429/JACoW-SRF2017-TUPB060
[n]	K. Alrutz-Ziemssen et al., “The Superconducting 130 MeV Recyclotron for Electrons at Darmstadt”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-30, pp. 512-514. 
[n]	H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n]	G. Y. Hsiung, “Special Aluminum Gasket Sealing of Non-circular Profile Flanges for the Accelerator UHV Systems”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1347-1349. doi:10.18429/JACoW-IPAC2019-TUPMP044
[n]	D. Xiang and G. V. Stupakov, “Tolerance Study for the Echo-Enabled Harmonic Generation Free Electron Laser”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP044, pp. 2367-2369. 
[n]	Q. Gao et al., “Transformer Ratio Enhancement Experiment Based on Emittance Exchanger in Argonne Wakefield Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1115-1118. doi:10.18429/JACoW-NAPAC2016-THPOA08
[n]	R. Basilio et al., “Alignment for the LNLS Synchrotron Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP088G, pp. 2603-2605. 
[n]	W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 360-363. doi:10.18429/JACoW-IPAC2019-MOPGW100
[n]	Y. Wang et al., “Understanding the beam quality requirement for high energy electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2609-2612. doi:10.18429/JACoW-IPAC2023-WEODB3
[n]	Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365. 
[n]	A. Schnase, H. Meuth, and H. Halling, “Possibilities and Limitations for a Fully Digital RF Signal Synthesis and Control”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1253-1256. 
[n]	B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357. 
[n]	M. P. Pimentel et al., “Linux-based PXIe System for the Real-Time Control of New Painting Bumper at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 484. doi:10.18429/JACoW-ICALEPCS2019-MOPHA113
[n]	D. Tronc, “Compact Protontherapy Unit Predesign”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1768-1771. 
[n]	Y. Jiang et al., “Electron cyclotron resonance accelerator for industrial radiation processing”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS060, unpublished. 
[n]	N. Holtkamp et al., “Longitudinal Beam Dynamics of the RWT-Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 676-679. 
[n]	J. Halbritter, “On RF Residual Losses in Superconducting Cavities”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-24, pp. XX-XX. 
[n]	G. Savarese et al., “Design and Development of the New Diagnostics Control System for the SPES Project at INFN-LNL”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 428-432. doi:10.18429/JACoW-ICALEPCS2021-TUPV016
[n]	J.-L. Vay, C. Benedetti, R. H. Cohen, A. Friedman, and D. P. Grote, “Some Computational Challenges in the Modeling of Accelerators and their Solutions in the Simulation Code Warp”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THP07, pp. 233-235. 
[n]	T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836. 
[n]	K. Gubrienko et al., “Precision Geometric Parameter Gage for Synchroton Radiation”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP048, pp. XX-XX. 
[n]	G. C. Pappas et al., “NLC Hybrid Solid State Induction Modulator”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP42, pp. 697-699. 
[n]	A. Horbowa and P. Dolegieviez, “Vacuum System Performances on SPIRAL Facility”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-04, pp. 167-170. 
[n]	J. R. Delayen, C. L. Bohn, W. L. Kennedy, G. L. Nichols, C. T. Roche, and L. Sagalovsky, “Recent Developments in the Application of RF Superconductivity to High-Brightness and High-Gradient Ion Beam Accelerators”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E03, pp. XX-XX. 
[n]	I. R. Gulamov, M. N. Abdukajumov, and B. S. Yuldashev, “The Faciltities and the Isotope Production in the Institute of Nuclear Physics in Tashkent”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-17, pp. 588-589. 
[n]	S. F. Mikhailov et al., “Project of Booster Synchrotron for Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH124, pp. 3525-3527. 
[n]	S. R. Marques et al., “Design of Button Beam Position Monitor for the Brazilian Synchrotron Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN005, pp. 3871-3873. 
[n]	C. Deibele, S. Assadi, M. J. Schulte, and Z. P. Xie, “Status and Implementation of a Wideband Feedback System for e-p Instabilities in the SNS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF09, pp. 462-465. 
[n]	Yu. Ts. Oganessian, “Progress Report on the JINR Heavy Ion Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2648-2652. 
[n]	S. O. Schriber, “Preliminary Design Study of a 60 MeV CW Electron Accelerator Using a Conventional Standing Wave Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB12, pp. 405-408. 
[n]	H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory of the Smith-Purcell Free-Electron Laser”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH026, pp. 77-80. 
[n]	A. Hofmann, K. Aulenbacher, M. W. Bruker, J. Dietrich, S. Friederich, and T. Weilbach, “Powering of the HV-Solenoids at the HESR Electron Cooler”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO05, pp. 107-109. 
[n]	J. Serrano, P. Alvarez, M. M. Lipinski, and T. Wlostowski, “Accelerator Timing Systems Overview”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOAN1, pp. 1376-1380. 
[n]	X. Li et al., “Simulation Studies on the Saturated Emission at PITZ”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 444-447. doi:10.18429/JACoW-FEL2019-WEP052
[n]	C. Christou and S. A. Pande, “Initial RF Tests of the Diamond S-Band Photocathode Gun”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB073, pp. 1002-1004. 
[n]	N. N. Alexeev et al., “ITEP-TWAC Renewal and Upgrading Program”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEZCH01, pp. 112-116. 
[n]	F. J. Jia et al., “Beam Dynamics Design of a 325 MHz RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA022, pp. 1772-1774. 
[n]	A. Lal, K. Wharton, D. Gordon, M. J. Everett, C. E. Clayton, and C. Joshi, “Measurements of the Beatwave Dynamics in Time and Space”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB04, pp. 767-769. 
[n]	S. Kazakov et al., “Main Couplers for Project X”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC050, pp. 2324-2326. 
[n]	T. Batten, “Closing of IBIC 2023”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH2I05, unpublished. 
[n]	W. Praeg, D. McGhee, and G. Volk, “Phase Lock of Rapid Cycling Synchrotron and Neutron Choppers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2171-2174. 
[n]	M. Schaumann et al., “Proposal of a Girder Realignment Test in PETRA III”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1435-1438. doi:10.18429/JACoW-IPAC2022-TUPOMS015
[n]	G. Wang, A. Blednykh, M. Sangroula, and S. Verdu-Andres, “Impedance calculation for the hadron storage ring in the Electron-Ion Collider with ECHO3D”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3104-3107. doi:10.18429/JACoW-IPAC2024-THPC48
[n]	M. Nakao et al., “Beam Simulation for Improved Operation of Cyclotron NIRS-930”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 797-799. doi:10.18429/JACoW-IPAC2014-MOPRI081
[n]	O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 540-542. doi:10.18429/JACoW-IPAC2018-MOPML059
[n]	P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742. 
[n]	M. Audrain et al., “Using a Java Embedded DSL for LHC Test Analysis”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC079, pp. 1254-1257. 
[n]	J. A. Martin et al., “A Proposed National Heavy-Ion Accelerator at Oak Ridge”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 54-63. 
[n]	D. I. Teixeira, L. Davoine, W. K. Hulek, and L. Zwalinski, “An Evaluation of Schneider M580 HSBY PLC Redundancy in the R744 System A Cooling Unit”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 484-486. doi:10.18429/JACoW-ICALEPCS2021-TUPV036
[n]	M. Schumacher, X. Jiang, and M. Vogel, “GaN-based Photocathodes for High Brightness Electron Beams”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 906-909. doi:10.18429/JACoW-SRF2017-THPB075
[n]	R. Perry, “The ZGS Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-02, pp. 7-18. 
[n]	D. Jacquet, J. C. Bau, and I. Kozsar, “The LHC Injection Sequencer”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC105, pp. 1307-1310. 
[n]	S. O. Schriber, “To be pi or not to be pi: That is the Dilemma”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO028, pp. 2280-2282. 
[n]	H. A. Day, R. M. Jones, F. Caspers, and E. Métral, “Simulations of Coaxial Wire Measurements of the Impedance of Asymmetric Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS079, pp. 787-789. 
[n]	E. Marin, A. Latina, F. Plassard, D. Schulte, and R. Tomas, “CLIC Tuning Performance Under Realistic Error Conditions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2403-2406. doi:10.18429/JACoW-IPAC2017-TUPVA130
[n]	L. Liao, Q. Gu, M. Zhang, and M. H. Zhao, “Development of a Micro-Pulse Electron Gun Based Upon pi-Mode Dual-Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP132, pp. 367-369. 
[n]	T. V. Shaftan, A. Blednykh, Y. Kawashima, S. Krinsky, J. Rose, and L.-H. Yu, “Requirements on the Pulsed Magnets for the Best Injector Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC045, pp. 1823-1825. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search