Favourites
For Word
[n] C. Roderick, R. Billen, and D. D. Teixeira, “Instrumentation of the CERN Accelerator Logging Service: Ensuring Performance, Scalability, Maintenance and Diagnostics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHAUST06, pp. 1232-1235.
[n] D. U. L. Yu, G. D. Craig, and J. F. DeFord, “Relativistic Klystron Wakefields”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1178-1181.
[n] M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2016-2019.
[n] N. Liu, A. Ibrahim, A. Semenov, and M. Wendt, “Digital Signal Processing for Bunched Beam Intensity Measurements”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG002, pp. 20-22.
[n] N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817.
[n] C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3283-3286.
[n] G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
[n] M. Piekarski, W. T. Kitka, and J. Jaworek-Korjakowska, “Deep Neural Network for Anomaly Detection in Accelerators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1379. doi:10.18429/JACoW-ICALEPCS2019-WEPHA121
[n] D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1156-1159. doi:10.18429/JACoW-IPAC2017-MOPVA128
[n] D. P. Brodrick et al., “Motion Control System for the European Spallation Source Target Wheel”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 717-721. doi:10.18429/JACoW-ICALEPCS2017-TUPHA129
[n] A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 411-413. doi:10.18429/JACoW-NAPAC2016-TUPOA63
[n] P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 706-708. doi:10.18429/JACoW-ICALEPCS2017-TUPHA126
[n] S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160.
[n] S. M. Pattalwar, R. Bate, G. Cox, P. A. McIntosh, and A. Oates, “Instrumentation and Control System for the International ERL Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO053, pp. 710-714.
[n] D. P. Brodrick, T. Brys, T. Korhonen, and J. E. Sparger, “EPICS Architecture for Neutron Instrument Control at the European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1043-1047. doi:10.18429/JACoW-ICALEPCS2017-WEBPL01
[n] A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 741-744. doi:10.18429/JACoW-ICALEPCS2017-TUPHA141
[n] M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 701-705. doi:10.18429/JACoW-ICALEPCS2017-TUPHA125
[n] P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
[n] V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 491-493. doi:10.18429/JACoW-LINAC2018-TUPO068
[n] P. Grand, K. Batchelor, R. Chasman, and R. Rheaume, “The Proposed Brookhaven Accelerator-Based Neutron Generator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C08, pp. 153-159.
[n] T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 161-164. doi:10.18429/JACoW-IBIC2015-MOPB049
[n] G. T. Danby, J. E. Allinger, and J. W. Jackson, “Magnet Design for a Very High Energy Synchrotron Employing a Separated Function Magnet Lattice”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 431-437.
[n] E. Matias et al., “Canadian Light Source - Phase II Beamline Control System Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP075, pp. 254-256.
[n] G. H. Trilling, “Invited Paper- Impact of Storage Rings on Elementary Particle Physics”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4252-4258.
[n] K. Batchelor, T. Nishikawa, and T. Werntz, “Numerical Analysis of the RF Field in a Drift Tube Loaded Cavity”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 295-303.
[n] T. A. Welton, “Session V Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223.
[n] Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859.
[n] G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
[n] R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981.
[n] T. A. Welton, “Computer Codes for Cyclotron Orbit Calculations”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A11, pp. 48-54.
[n] L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
[n] T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
[n] D. Shoffstall, “Visible Wavelength Free Electron Oscillator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-04, pp. 295-301.
[n] M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
[n] W. Decking, O. Kaul, H. Nesemann, and J. Roßbach, “Treatment of Wiggler and Undulator Field Errors in Tracking Codes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC19, pp. 2874-2876.
[n] L. Zhao et al., “Study on Cleaning of Copper Plated Bellows for LCLS-II”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 71-73. doi:10.18429/JACoW-LINAC2018-MOPO019
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n] D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3439-3441. doi:10.18429/JACoW-IPAC2024-THPG70
[n] J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
[n] J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
[n] B. Barish, “GDE Expectations from SRF Community”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper FRA09, pp. 642-642.
[n] W. V. Hassenzahl, S. Caspi, W. Gilbert, C. Peters, J. Rechen, and C. Taylor, “A Layer-Wound, 8.7 Tela Superconducting Dipole Magnet”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3396-3399.
[n] M. Risoldi, V. Amaral, B. F. Barroca, D. Buchs, and L. Masetti, “A Methodology for Control Systems GUI Prototyping - A Case Study”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEY01, pp. 151-153.
[n] J. A. Martin, J. B. Ball, E. D. Hudson, R. S. Lord, G. S. McNeilly, and S. W. Mosko, “Design Status of a Separated-Sector Cyclotron Booster Accelerator for the Holifield Heavy Ion Research Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1165-1168.
[n] P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4101-4103. doi:10.18429/JACoW-IPAC2016-THPOY008
[n] H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179.
[n] I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4334-4337. doi:10.18429/JACoW-IPAC2017-THPIK104
[n] I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524.
[n] I. Bustinduy et al., “Beam Dynamics Simulations for the ESS-Bilbao H- Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC023, pp. 2052-2054.
[n] P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597.
[n] E. B. Holzer et al., “Generation of 1.5 Million Beam Loss Threshold Values”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC147, pp. 3333-3335.
[n] N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326.
[n] M. Pieck et al., “The LANSCE Control System Current State and Upgrade Outlook”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS052, pp. 554-556.
[n] W. X. Cheng and T. Obina, “Multi-bunch Feedback Activities at Photon Factory Advanced Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEC3H101, pp. 330-332.
[n] S. Nagaitsev et al., “Commissioning of the Fermilab Electron Cooler Prototype Beam Line”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE036, pp. 2020-2022.
[n] F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
[n] G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 120-122. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO22
[n] J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n] W. B. Herrmannsfeldt and R. H. Miller, “A 45[degree] Inflection System for the Stanford Two-Mile Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 842-846.
[n] R. Tanner, M. de Jong, E. Matias, M. Silzer, J. Stampe, and G. Wright, “Canadian Light Source Storage Ring RF System”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP32, pp. 532-534.
[n] R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33.
[n] I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
[n] R. Stassen, B. Breitkreutz, G. Schug, and H. Stockhorst, “Stochastic Cooling of Heavy Ions in the HESR”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD02, pp. 15-19.
[n] A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 913-916. doi:10.18429/JACoW-IPAC2015-MOPHA052
[n] A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
[n] G. Cavallari, Ph. Gayet, G. Geschonke, D. Kaiser, and J. M. Jimenez, “Beam Related Thermal Losses on the Cryogenic and Vacuum Systems of LEP”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A13, pp. 122-132.
[n] L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Roderick, R. Billen, and D. D. Teixeira, “Instrumentation of the CERN Accelerator Logging Service: Ensuring Performance, Scalability, Maintenance and Diagnostics”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHAUST06, pp. 1232-1235.
- D. U. L. Yu, G. D. Craig, and J. F. DeFord, “Relativistic Klystron Wakefields”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1178-1181.
- M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2016-2019.
- N. Liu, A. Ibrahim, A. Semenov, and M. Wendt, “Digital Signal Processing for Bunched Beam Intensity Measurements”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG002, pp. 20-22.
- N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817.
- C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3283-3286.
- G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
- M. Piekarski, W. T. Kitka, and J. Jaworek-Korjakowska, “Deep Neural Network for Anomaly Detection in Accelerators”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1379.
- D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1156-1159.
- D. P. Brodrick et al., “Motion Control System for the European Spallation Source Target Wheel”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 717-721.
- A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 411-413.
- P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 706-708.
- S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160.
- S. M. Pattalwar, R. Bate, G. Cox, P. A. McIntosh, and A. Oates, “Instrumentation and Control System for the International ERL Cryomodule”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO053, pp. 710-714.
- D. P. Brodrick, T. Brys, T. Korhonen, and J. E. Sparger, “EPICS Architecture for Neutron Instrument Control at the European Spallation Source”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1043-1047.
- A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 741-744.
- M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 701-705.
- P. Grand, “Vacuum Requirements for Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
- V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 491-493.
- P. Grand, K. Batchelor, R. Chasman, and R. Rheaume, “The Proposed Brookhaven Accelerator-Based Neutron Generator”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C08, pp. 153-159.
- T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 161-164.
- G. T. Danby, J. E. Allinger, and J. W. Jackson, “Magnet Design for a Very High Energy Synchrotron Employing a Separated Function Magnet Lattice”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 431-437.
- E. Matias et al., “Canadian Light Source - Phase II Beamline Control System Status Update”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP075, pp. 254-256.
- G. H. Trilling, “Invited Paper- Impact of Storage Rings on Elementary Particle Physics”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4252-4258.
- K. Batchelor, T. Nishikawa, and T. Werntz, “Numerical Analysis of the RF Field in a Drift Tube Loaded Cavity”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 295-303.
- T. A. Welton, “Session V Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223.
- Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859.
- G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
- R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981.
- T. A. Welton, “Computer Codes for Cyclotron Orbit Calculations”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A11, pp. 48-54.
- L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
- T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
- D. Shoffstall, “Visible Wavelength Free Electron Oscillator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE2-04, pp. 295-301.
- M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
- W. Decking, O. Kaul, H. Nesemann, and J. Roßbach, “Treatment of Wiggler and Undulator Field Errors in Tracking Codes”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC19, pp. 2874-2876.
- L. Zhao et al., “Study on Cleaning of Copper Plated Bellows for LCLS-II”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 71-73.
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
- D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG70, pp. 3439-3441.
- J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
- J. Preble et al., “SNS Cryomodule Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
- B. Barish, “GDE Expectations from SRF Community”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper FRA09, pp. 642-642.
- W. V. Hassenzahl, S. Caspi, W. Gilbert, C. Peters, J. Rechen, and C. Taylor, “A Layer-Wound, 8.7 Tela Superconducting Dipole Magnet”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3396-3399.
- M. Risoldi, V. Amaral, B. F. Barroca, D. Buchs, and L. Masetti, “A Methodology for Control Systems GUI Prototyping - A Case Study”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEY01, pp. 151-153.
- J. A. Martin, J. B. Ball, E. D. Hudson, R. S. Lord, G. S. McNeilly, and S. W. Mosko, “Design Status of a Separated-Sector Cyclotron Booster Accelerator for the Holifield Heavy Ion Research Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1165-1168.
- P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4101-4103.
- H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179.
- I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4334-4337.
- I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524.
- I. Bustinduy et al., “Beam Dynamics Simulations for the ESS-Bilbao H- Ion Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC023, pp. 2052-2054.
- P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597.
- E. B. Holzer et al., “Generation of 1.5 Million Beam Loss Threshold Values”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC147, pp. 3333-3335.
- N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326.
- M. Pieck et al., “The LANSCE Control System Current State and Upgrade Outlook”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS052, pp. 554-556.
- W. X. Cheng and T. Obina, “Multi-bunch Feedback Activities at Photon Factory Advanced Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEC3H101, pp. 330-332.
- S. Nagaitsev et al., “Commissioning of the Fermilab Electron Cooler Prototype Beam Line”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE036, pp. 2020-2022.
- F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
- G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 120-122.
- J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1151-1153.
- W. B. Herrmannsfeldt and R. H. Miller, “A 45[degree] Inflection System for the Stanford Two-Mile Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 842-846.
- R. Tanner, M. de Jong, E. Matias, M. Silzer, J. Stampe, and G. Wright, “Canadian Light Source Storage Ring RF System”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP32, pp. 532-534.
- R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33.
- I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
- R. Stassen, B. Breitkreutz, G. Schug, and H. Stockhorst, “Stochastic Cooling of Heavy Ions in the HESR”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD02, pp. 15-19.
- A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 913-916.
- A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
- G. Cavallari, Ph. Gayet, G. Geschonke, D. Kaiser, and J. M. Jimenez, “Beam Related Thermal Losses on the Cryogenic and Vacuum Systems of LEP”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A13, pp. 122-132.
- L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717.
Back to search