Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J.-M. Lagniel and A.-C. Piquemal, “On the Dynamics of Space-Charge Dominated Beams (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-70, pp. 529-531.
[n] Y. F. Xu, Z. G. He, Q. K. Jia, and W. W. Li, “The Generation of Highly Intense THz Radiation based on Smith-Purcell Radiation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1654-1656. doi:10.18429/JACoW-IPAC2015-TUPJE017
[n] W. J. Corbett, J. A. Safranek, and A. Terebilo, “Initial Scraper Measurements in SPEAR 3”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper RPAT081, unpublished.
[n] D. F. A. Winters et al., “Laser Cooling of Relativistic Highly Charged Ions at FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3747-3747. doi:10.18429/JACoW-IPAC2016-THPMY040
[n] Y. L. Huang, R. A. Rimmer, H. Wang, and S. Wang, “Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2981-2984. doi:10.18429/JACoW-IPAC2015-WEPMN025
[n] D. Gonnella and M. Liepe, “New Insights into Heat Treatment of SRF Cavities in a Low-pressure Nitrogen Atmosphere”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2634-2637. doi:10.18429/JACoW-IPAC2014-WEPRI064
[n] C. Reece et al., “Performance Experience with the CEBAF SRF Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE12, pp. 1512-1514.
[n] J. Roberts et al., “Design, Hardware Tests and First Results From the CLIC Drive Beam Phase Feed-Forward Prototype at CTF3”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP033, pp. 128-130.
[n] Z. P. Xie, Y. K. Ding, Y. He, Y. M. Li, J. Liang, and H. Liu, “Arc Discharge Detectors for the CiADS Superconducting RF Cavities”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 228-231. doi:10.18429/JACoW-IBIC2018-TUPA08
[n] Ch. Schmidt, L. Butkowski, M. Hoffmann, H. Schlarb, M. Grzegrzolka, and I. Rutkowski, “High Performance and Low Latency Single Cavity RF Control Based on MTCA.4”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC122, pp. 1348-1350.
[n] R. B. Palmer et al., “A Complete Scheme of Ionization Cooling for a Muon Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS090, pp. 3193-3195.
[n] Y. W. Zhang et al., “Control System Dedicated for Beam Line of Proton Radiography on 100 MeV Cyclotron CYCIAE-100”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 202-204. doi:10.18429/JACoW-Cyclotrons2016-TUP15
[n] K. N. Sjobak, E. Adli, A. Grudiev, and W. Wuensch, “Design of an Accelerating Structure for a 500 GeV CLIC using Ace3P”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC011, pp. 3296-3298.
[n] P. Bezzon et al., “Commissioning of the LEBT of PIAVE and the Alice Ion Source Emittance Measurement”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B07, pp. 1702-1704.
[n] Y. Luo, W. Fischer, F. M?®ot, and G. Robert-Demolaize, “Symplectic and Exact Tracking of Low Energy 197Au??? in the Relativistic Heavy Ion Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 791-793. doi:10.18429/JACoW-IPAC2019-MOPRB092
[n] S. Canella and G. Bassato, “Design of a Distributed Control System Based on CORBA and JAVA for a New RIB Facility at LNL”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP002, pp. XX-XX.
[n] F. Schillaci et al., “Advanced Beam Transport Solutions for ELIMAIA: A User Oriented Laser-Driven Ion Beamlines”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1936-1939. doi:10.18429/JACoW-IPAC2019-TUPTS005
[n] C. Vicario, D. Filippetto, G. Gatti, and A. Ghigo, “Drive Laser System for the SPARC Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP073, pp. 539-541.
[n] T. J. Zhang, Z. G. Li, and Y. L. Lu, “Progress on Construction of CYCIAE-100”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUA2CIO01, pp. 308-313.
[n] L. Carver et al., “Beam loading simulations in PyAT for the ESRF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3181-3184. doi:10.18429/JACoW-IPAC2023-WEPL030
[n] Z. Q. Yang et al., “Development of Nb?Sn Cavity Coating at IMP”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 21-24. doi:10.18429/JACoW-SRF2019-MOP003
[n] R. A. Rimmer, J. Guo, J. Henry, H. Wang, S. Wang, and Y. L. Huang, “RF System Requirements for a Medium-Energy Electron-Ion Collider (MEIC) at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3536-3539. doi:10.18429/JACoW-IPAC2015-WEPWI022
[n] H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
[n] J. Borburgh et al., “Concept for Elena Extraction and Beam Transfer Elements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI061, pp. 422-424.
[n] A. Mosnier et al., “Present Status and Developments of the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP075, pp. 3910-3912.
[n] R. Ge et al., “Design of C-ADS Injector-I Cryomodule for 325MHz Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 294-296. doi:10.18429/JACoW-SRF2017-MOPB099
[n] H. Hanaki, S. Anami, A. Enomoto, T. Oogoe, and Y. Otake, “Use of SLEDs for High-Gradient Acceleration”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-28, pp. 430-432.
[n] T. Taniuchi, T. Aoki, K. Fukami, S. Takano, and T. Watanabe, “Permanent Dipole Magnet R&D for SPring-8-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2883-2885. doi:10.18429/JACoW-IPAC2015-WEPMA050
[n] N. Catalan-Lasheras et al., “Accelerator Physics Model of Expected Beam Loss along the SNS Accelerator Facility during Normal Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE011, pp. 1013-1015.
[n] H. C. Jung, J. Joo, J. Lee, R. E. Laxdal, and Z. Y. Yao, “SRF Cavities for RAON”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2200-2201. doi:10.18429/JACoW-IPAC2016-WEPMB035
[n] S. Cleva, L. Pivetta, and P. Sigalotti, “BeagleBone for Embedded Control System Applications”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB05, pp. 62-65.
[n] W. E. Norum et al., “First Full-Sector Closed-Loop Operational Experience for the FPGA-Based Broadband Beam Position Monitor at the APS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP004, pp. 3441-3443.
[n] Y. Z. Wu and Q. L. Peng, “Interaction Region Design for Beijing $ au$-Charm Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W032, pp. 378-380.
[n] Q. K. Jia, “Design Consideration of New Insertion Devices of Hefei Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC166, pp. 3284-3286.
[n] M. Dusek, J.-C. Gayde, and M. Sulc, “Generation of symmetrical optical caustic beams for precise alignment”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3333-3336. doi:10.18429/JACoW-IPAC2024-THPG35
[n] P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “A Ten-Bend Achromat Lattice with Interleaved Dispersion Bumps for a Diffraction-Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1538-1540. doi:10.18429/JACoW-IPAC2019-TUPGW057
[n] R. M. Brodhage, A. Almomani, and U. Ratzinger, “Design Study of a High Frequency Proton Ladder RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO014, pp. 3788-3790.
[n] Y. Kuriyama, Y. Ishi, J.-B. Lagrange, Y. Mori, and T. Uesugi, “EPICS Control System for the FFAG Complex at KURRI”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC036, pp. 1164-1167.
[n] V. Vogel et al., “Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC111, pp. 3146-3148.
[n] K. Kan, T. Kondoh, K. Norizawa, A. Ogata, J. Yang, and Y. Yoshida, “Generation of Multimode Quasi-monochromatic Terahertz”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC101, pp. 1248-1250.
[n] A. Facco, “SRF Technology Challenge and Development”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B02, pp. 536-540.
[n] G. Kotzian, W. H?Âfle, and E. Vogel, “LHC Transverse Feedback Damping Efficiency”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP114, pp. 3632-3634.
[n] V. P. Nagaslaev, K. A. Brown, and M. Tomizawa, “Higher Multipoles in 3rd Integer Resonance Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2437-2439. doi:10.18429/JACoW-IPAC2019-WEPMP045
[n] S. Wang et al., “Capture, Acceleration and Bunching RF Systems for the MEIC Booster and Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2318-2321. doi:10.18429/JACoW-IPAC2015-TUPWI034
[n] H. Zha et al., “Choke-Mode Damped Structure Design for the CLIC Main Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR015, pp. 1840-1842.
[n] M. J. Boland, T. M. Mitsuhashi, and K. P. Wootton, “Turn-by-turn Observation of the Injected Beam Profile at the Australian Synchrotron Storage Ring”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB83, pp. 276-278.
[n] Z. Li et al., “Beam Dynamics of China ADS Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3A02, pp. 502-506.
[n] M. Kondoh and K. Muto, “Possibility of Accelerating the Light Nucleus by KEK Proton Synchroton”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2045-2047.
[n] D. Stratakis, J. S. Berg, J. C. Gallardo, and R. B. Palmer, “Effect of External Magnetic Fields on the Operation of RF Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP004, pp. 809-811.
[n] K. A. Brown et al., “Automating Control of the Beams for the NASA Space Radiation Laboratory”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBB03, pp. 1392-1395.
[n] V. Schoefer, L. A. Ahrens, K. A. Brown, A. U. Luccio, W. W. MacKay, and T. Roser, “Including Partial Siberian Snakes Into the AGS Online Model”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC010, pp. 270-272.
For LaTeX
Use Complete Form
For BibTeX
References
- J.-M. Lagniel and A.-C. Piquemal, “On the Dynamics of Space-Charge Dominated Beams (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-70, pp. 529-531.
- Y. F. Xu, Z. G. He, Q. K. Jia, and W. W. Li, “The Generation of Highly Intense THz Radiation based on Smith-Purcell Radiation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1654-1656.
- W. J. Corbett, J. A. Safranek, and A. Terebilo, “Initial Scraper Measurements in SPEAR 3”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT081, unpublished.
- D. F. A. Winters et al., “Laser Cooling of Relativistic Highly Charged Ions at FAIR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3747-3747.
- Y. L. Huang, R. A. Rimmer, H. Wang, and S. Wang, “Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2981-2984.
- D. Gonnella and M. Liepe, “New Insights into Heat Treatment of SRF Cavities in a Low-pressure Nitrogen Atmosphere”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2634-2637.
- C. Reece et al., “Performance Experience with the CEBAF SRF Cavities”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE12, pp. 1512-1514.
- J. Roberts et al., “Design, Hardware Tests and First Results From the CLIC Drive Beam Phase Feed-Forward Prototype at CTF3”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP033, pp. 128-130.
- Z. P. Xie, Y. K. Ding, Y. He, Y. M. Li, J. Liang, and H. Liu, “Arc Discharge Detectors for the CiADS Superconducting RF Cavities”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 228-231.
- Ch. Schmidt, L. Butkowski, M. Hoffmann, H. Schlarb, M. Grzegrzolka, and I. Rutkowski, “High Performance and Low Latency Single Cavity RF Control Based on MTCA.4”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC122, pp. 1348-1350.
- R. B. Palmer et al., “A Complete Scheme of Ionization Cooling for a Muon Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS090, pp. 3193-3195.
- Y. W. Zhang et al., “Control System Dedicated for Beam Line of Proton Radiography on 100 MeV Cyclotron CYCIAE-100”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 202-204.
- K. N. Sjobak, E. Adli, A. Grudiev, and W. Wuensch, “Design of an Accelerating Structure for a 500 GeV CLIC using Ace3P”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC011, pp. 3296-3298.
- P. Bezzon et al., “Commissioning of the LEBT of PIAVE and the Alice Ion Source Emittance Measurement”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B07, pp. 1702-1704.
- Y. Luo, W. Fischer, F. M?®ot, and G. Robert-Demolaize, “Symplectic and Exact Tracking of Low Energy 197Au??? in the Relativistic Heavy Ion Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 791-793.
- S. Canella and G. Bassato, “Design of a Distributed Control System Based on CORBA and JAVA for a New RIB Facility at LNL”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP002, pp. XX-XX.
- F. Schillaci et al., “Advanced Beam Transport Solutions for ELIMAIA: A User Oriented Laser-Driven Ion Beamlines”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1936-1939.
- C. Vicario, D. Filippetto, G. Gatti, and A. Ghigo, “Drive Laser System for the SPARC Photoinjector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP073, pp. 539-541.
- T. J. Zhang, Z. G. Li, and Y. L. Lu, “Progress on Construction of CYCIAE-100”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper TUA2CIO01, pp. 308-313.
- L. Carver et al., “Beam loading simulations in PyAT for the ESRF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL030, pp. 3181-3184.
- Z. Q. Yang et al., “Development of Nb?Sn Cavity Coating at IMP”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 21-24.
- R. A. Rimmer, J. Guo, J. Henry, H. Wang, S. Wang, and Y. L. Huang, “RF System Requirements for a Medium-Energy Electron-Ion Collider (MEIC) at JLab”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3536-3539.
- H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
- J. Borburgh et al., “Concept for Elena Extraction and Beam Transfer Elements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI061, pp. 422-424.
- A. Mosnier et al., “Present Status and Developments of the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP075, pp. 3910-3912.
- R. Ge et al., “Design of C-ADS Injector-I Cryomodule for 325MHz Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 294-296.
- H. Hanaki, S. Anami, A. Enomoto, T. Oogoe, and Y. Otake, “Use of SLEDs for High-Gradient Acceleration”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-28, pp. 430-432.
- T. Taniuchi, T. Aoki, K. Fukami, S. Takano, and T. Watanabe, “Permanent Dipole Magnet R&D for SPring-8-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2883-2885.
- N. Catalan-Lasheras et al., “Accelerator Physics Model of Expected Beam Loss along the SNS Accelerator Facility during Normal Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE011, pp. 1013-1015.
- H. C. Jung, J. Joo, J. Lee, R. E. Laxdal, and Z. Y. Yao, “SRF Cavities for RAON”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2200-2201.
- S. Cleva, L. Pivetta, and P. Sigalotti, “BeagleBone for Embedded Control System Applications”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB05, pp. 62-65.
- W. E. Norum et al., “First Full-Sector Closed-Loop Operational Experience for the FPGA-Based Broadband Beam Position Monitor at the APS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP004, pp. 3441-3443.
- Y. Z. Wu and Q. L. Peng, “Interaction Region Design for Beijing $ au$-Charm Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W032, pp. 378-380.
- Q. K. Jia, “Design Consideration of New Insertion Devices of Hefei Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC166, pp. 3284-3286.
- M. Dusek, J.-C. Gayde, and M. Sulc, “Generation of symmetrical optical caustic beams for precise alignment”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG35, pp. 3333-3336.
- P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “A Ten-Bend Achromat Lattice with Interleaved Dispersion Bumps for a Diffraction-Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1538-1540.
- R. M. Brodhage, A. Almomani, and U. Ratzinger, “Design Study of a High Frequency Proton Ladder RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO014, pp. 3788-3790.
- Y. Kuriyama, Y. Ishi, J.-B. Lagrange, Y. Mori, and T. Uesugi, “EPICS Control System for the FFAG Complex at KURRI”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC036, pp. 1164-1167.
- V. Vogel et al., “Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC111, pp. 3146-3148.
- K. Kan, T. Kondoh, K. Norizawa, A. Ogata, J. Yang, and Y. Yoshida, “Generation of Multimode Quasi-monochromatic Terahertz”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC101, pp. 1248-1250.
- A. Facco, “SRF Technology Challenge and Development”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B02, pp. 536-540.
- G. Kotzian, W. H?Âfle, and E. Vogel, “LHC Transverse Feedback Damping Efficiency”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP114, pp. 3632-3634.
- V. P. Nagaslaev, K. A. Brown, and M. Tomizawa, “Higher Multipoles in 3rd Integer Resonance Extraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2437-2439.
- S. Wang et al., “Capture, Acceleration and Bunching RF Systems for the MEIC Booster and Storage Rings”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2318-2321.
- H. Zha et al., “Choke-Mode Damped Structure Design for the CLIC Main Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR015, pp. 1840-1842.
- M. J. Boland, T. M. Mitsuhashi, and K. P. Wootton, “Turn-by-turn Observation of the Injected Beam Profile at the Australian Synchrotron Storage Ring”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB83, pp. 276-278.
- Z. Li et al., “Beam Dynamics of China ADS Linac”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3A02, pp. 502-506.
- M. Kondoh and K. Muto, “Possibility of Accelerating the Light Nucleus by KEK Proton Synchroton”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2045-2047.
- D. Stratakis, J. S. Berg, J. C. Gallardo, and R. B. Palmer, “Effect of External Magnetic Fields on the Operation of RF Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP004, pp. 809-811.
- K. A. Brown et al., “Automating Control of the Beams for the NASA Space Radiation Laboratory”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOBB03, pp. 1392-1395.
- V. Schoefer, L. A. Ahrens, K. A. Brown, A. U. Luccio, W. W. MacKay, and T. Roser, “Including Partial Siberian Snakes Into the AGS Online Model”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC010, pp. 270-272.
Back to search