Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Goin, “Status Report on the CNRS Orleans' Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-10, pp. 133-135.
[n] S. Littleton, “Dark current in LCLS-II: source characterization and start-to-end modeling”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS112, unpublished.
[n] J. Ma, M. Bates, A. Fetterman, M. Mitchell, R. Thornton, and A. Warrick, “Statistical uncertainty studies on various data analysis methods for Stretched Wire Alignment Technology used for the Scorpius Injector”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 800-802. doi:10.18429/JACoW-IPAC2025-MOPS098
[n] F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58.
[n] M. A. Boronina, E. Levichev, S. A. Nikitin, V. N. Snytnikov, and V. A. Vshivkov, “3D PIC Method Development for Simulation of Beam-Beam Effects in Supercolliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN060, pp. 3366-3368.
[n] A. Seryi et al., “Long Term Stability Study at FNAL and SLAC Using BINP Developed Hydrostatic Level System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB019, pp. 2769-2771.
[n] S. K. Esin et al., “Beam Loss Study at High Intensity Proton Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 754-757.
[n] E. D. Gazazian et al., “Setup for Determination of the Longitudinal Profile and Duration of Ultrashort Electron Bunches”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-70, pp. 869-871.
[n] S. Milton and D. Warner, “The APS Ceramic Chambers”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2494-2497.
[n] S. Littleton, “Analysis of Linear Induction Accelerator Physics with Field-Adapted Coordinate Transformations”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL069, unpublished.
[n] B. Rachmilowitz et al., “Packaged photocathodes for X-ray free electron lasers”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1586-1587. doi:10.18429/JACoW-IPAC2025-TUPS074
[n] E. A. Begloyan, E. D. Gazazian, V. G. Kocharian, and E. M. Laziev, “The Interaction of the Charged Particles Bunches and Waveguide-Cavity Structures”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-70, pp. 230-232.
[n] A. Chabert, “Status Report on GANIL”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97.
[n] J. Helsper, S. Kazakov, D. Longuevergne, D. Passarelli, N. Solyak, and S. Wallon, “Design, Manufacturing, Assembly, and Lessons Learned of the Pre-Production 325 MHz Couplers for the PIP-II Project at Fermilab”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 806-811. doi:10.18429/JACoW-SRF2023-WEPWB094
[n] Y. I. Ida et al., “Study on Vertical Electro-Polishing by Cathode With Variable-Geometry Wings”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP052, pp. 530-536.
[n] E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-54, pp. 578-579.
[n] A. Roth and W. Hillert, “Operation of Superconducting Cavities in a Fast Ramping Electron Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC078, pp. 253-255.
[n] N. Kohlstrunk et al., “Mechanical Aspects of the New Shutter Design at European XFEL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPA05, pp. XX-XX.
[n] M. W. Guetg, B. Beutner, E. Prat, and S. Reiche, “Dispersion Based Beam Tilt Correction”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO24, pp. 267-270.
[n] P. Czernecki, P. Bulira, P. Gebala, J. Janiga, and P. Klimecki, “Technical Overview of the SOLARIS Low-Conductivity Water Cooling System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3449-3451. doi:10.18429/JACoW-IPAC2017-WEPVA082
[n] A. S. Dhavale and K. C. Mittal, “Evaluation of External Q Using Kroll-Yu Method With Microwaves Studio”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA133, pp. 503-505.
[n] R. Beck, B. Bru, and C. Ricaud, “Beam Transmission Efficiency Between Injector and Target in the GANIL Complex”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J22, pp. 415-418.
[n] H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528.
[n] I. N. Biryukov, A. N. Mirzojan, P. N. Ostroumov, and S. A. Petronevich, “Transverse Beam Parameter Measurements at the INR Proton Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1109-1112.
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
[n] E. Urazov et al., “Avoiding overcooled ion beams by exciting energy spread through electron cooling”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1546-1548. doi:10.18429/JACoW-IPAC2025-TUPS051
[n] J. G. Weisend, “The ESS Accelerator: Moving into Construction”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1252-1256. doi:10.18429/JACoW-NAPAC2016-THA3IO02
[n] S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
[n] A. H. Regan, S.-I. Kwon, T. S. Rohlev, Y.-M. Wang, M. S. Prokop, and D. W. Thomson, “The SNS Linac RF Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH015, pp. 803-805.
[n] A. Rodriguez-Fernandez, B. Pedrini, S. Reiche, and K. Finkelstein, “Measurement of Spatial Displacement of X-rays in Crystals for Self-Seeding Applications”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 405-408. doi:10.18429/JACoW-FEL2015-TUP022
[n] A. Roth, F. Frommberger, N. Heurich, W. Hillert, M. Schedler, and R. Zimmermann, “Commissioning of Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC077, pp. 250-252.
[n] S. Yakovenko et al., “Status of the High Voltage Electron Cooler Project for NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUACH01, pp. 58-59.
[n] G. Decker et al., “Reduction of Open-Loop Low Frequency Beam Motion at the APS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR19, pp. 303-305.
[n] N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2069-2071.
[n] S. C. Kim, S. S. Park, S. H. Kim, Y. J. Han, and S. H. Nam, “A New Modulator Controller of The PLS Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO409, pp. 55-57.
[n] C. Berthe, E. Lecorche, M. H. Moscatello, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC042, pp. 178-180.
[n] M. Wake, D. Blatchley, D. A. Gross, M. Kumada, and A. V. Tollestrup, “Recent Measurement Results of Energy Doubler Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3894-3899.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Goin, “Status Report on the CNRS Orleans' Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-10, pp. 133-135.
- S. Littleton, “Dark current in LCLS-II: source characterization and start-to-end modeling”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS112, unpublished.
- J. Ma, M. Bates, A. Fetterman, M. Mitchell, R. Thornton, and A. Warrick, “Statistical uncertainty studies on various data analysis methods for Stretched Wire Alignment Technology used for the Scorpius Injector”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS098, pp. 800-802.
- F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58.
- M. A. Boronina, E. Levichev, S. A. Nikitin, V. N. Snytnikov, and V. A. Vshivkov, “3D PIC Method Development for Simulation of Beam-Beam Effects in Supercolliders”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN060, pp. 3366-3368.
- A. Seryi et al., “Long Term Stability Study at FNAL and SLAC Using BINP Developed Hydrostatic Level System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB019, pp. 2769-2771.
- S. K. Esin et al., “Beam Loss Study at High Intensity Proton Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 754-757.
- E. D. Gazazian et al., “Setup for Determination of the Longitudinal Profile and Duration of Ultrashort Electron Bunches”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-70, pp. 869-871.
- S. Milton and D. Warner, “The APS Ceramic Chambers”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2494-2497.
- S. Littleton, “Analysis of Linear Induction Accelerator Physics with Field-Adapted Coordinate Transformations”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL069, unpublished.
- B. Rachmilowitz et al., “Packaged photocathodes for X-ray free electron lasers”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS074, pp. 1586-1587.
- E. A. Begloyan, E. D. Gazazian, V. G. Kocharian, and E. M. Laziev, “The Interaction of the Charged Particles Bunches and Waveguide-Cavity Structures”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-70, pp. 230-232.
- A. Chabert, “Status Report on GANIL”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97.
- J. Helsper, S. Kazakov, D. Longuevergne, D. Passarelli, N. Solyak, and S. Wallon, “Design, Manufacturing, Assembly, and Lessons Learned of the Pre-Production 325 MHz Couplers for the PIP-II Project at Fermilab”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB094, pp. 806-811.
- Y. I. Ida et al., “Study on Vertical Electro-Polishing by Cathode With Variable-Geometry Wings”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP052, pp. 530-536.
- E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-54, pp. 578-579.
- A. Roth and W. Hillert, “Operation of Superconducting Cavities in a Fast Ramping Electron Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC078, pp. 253-255.
- N. Kohlstrunk et al., “Mechanical Aspects of the New Shutter Design at European XFEL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPA05, pp. XX-XX.
- M. W. Guetg, B. Beutner, E. Prat, and S. Reiche, “Dispersion Based Beam Tilt Correction”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO24, pp. 267-270.
- P. Czernecki, P. Bulira, P. Gebala, J. Janiga, and P. Klimecki, “Technical Overview of the SOLARIS Low-Conductivity Water Cooling System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3449-3451.
- A. S. Dhavale and K. C. Mittal, “Evaluation of External Q Using Kroll-Yu Method With Microwaves Studio”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA133, pp. 503-505.
- R. Beck, B. Bru, and C. Ricaud, “Beam Transmission Efficiency Between Injector and Target in the GANIL Complex”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J22, pp. 415-418.
- H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528.
- I. N. Biryukov, A. N. Mirzojan, P. N. Ostroumov, and S. A. Petronevich, “Transverse Beam Parameter Measurements at the INR Proton Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1109-1112.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
- E. Urazov et al., “Avoiding overcooled ion beams by exciting energy spread through electron cooling”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS051, pp. 1546-1548.
- J. G. Weisend, “The ESS Accelerator: Moving into Construction”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1252-1256.
- S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
- A. H. Regan, S.-I. Kwon, T. S. Rohlev, Y.-M. Wang, M. S. Prokop, and D. W. Thomson, “The SNS Linac RF Control System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH015, pp. 803-805.
- A. Rodriguez-Fernandez, B. Pedrini, S. Reiche, and K. Finkelstein, “Measurement of Spatial Displacement of X-rays in Crystals for Self-Seeding Applications”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 405-408.
- A. Roth, F. Frommberger, N. Heurich, W. Hillert, M. Schedler, and R. Zimmermann, “Commissioning of Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC077, pp. 250-252.
- S. Yakovenko et al., “Status of the High Voltage Electron Cooler Project for NICA Collider”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUACH01, pp. 58-59.
- G. Decker et al., “Reduction of Open-Loop Low Frequency Beam Motion at the APS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR19, pp. 303-305.
- N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2069-2071.
- S. C. Kim, S. S. Park, S. H. Kim, Y. J. Han, and S. H. Nam, “A New Modulator Controller of The PLS Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO409, pp. 55-57.
- C. Berthe, E. Lecorche, M. H. Moscatello, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC042, pp. 178-180.
- M. Wake, D. Blatchley, D. A. Gross, M. Kumada, and A. V. Tollestrup, “Recent Measurement Results of Energy Doubler Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3894-3899.
Back to search