Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Lucas Rodriguez, “Estimation of the Response Time and Data Flows in the TOTEM DCS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL021, pp. 171-173.
[n] S. Luo, D. B. Liao, S. Liu, F. Yang, Z. G. Yin, and T. J. Zhang, “Visual Scenery Technology Study on Cyclotron and Communication Equipment Operation Simulation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP006, pp. 4785-4787.
[n] M. Behtouei, L. Faillace, M. Migliorati, L. Palumbo, and B. Spataro, “New Analytical Derivation of Group Velocity in TW Accelerating Structures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 155-158. doi:10.18429/JACoW-IPAC2019-MOPGW030
[n] Yu. P. Severgin and I. A. Shukeilo, “Ion Pulse Compressor and Stretcher Ring for Linear Meson Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2709-2712.
[n] A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1250-1253.
[n] P. Beasley and O. Heid, “Progress Towards A Novel Compact High Voltage Electrostatic Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP207, pp. 1876-1878.
[n] N. Simos, P. K. Job, and N. V. Mokhov, “An Experimental Study of Radiation-induced Demagnetization of Insertion Device Permanent Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC053, pp. 2112-2114.
[n] G. Carron and L. Thorndahl, “Progress with the CLIC Transfer Structures (CTS)”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2167-2170.
[n] R. Geller, “Invited Paper: Multiply Charged ECR Ion Sources for Particle Accelerators”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-01, pp. 699-706.
[n] C. Deiter, M. Kitel, and J. Schulz, “A Rapid Two Axis Scanner for Vacuum Environments With High EMP”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPA15, pp. XX-XX.
[n] F. Glotin, J.-M. Berset, R. Chaput, D. Jaroszynski, J.-M. Ortega, and R. Prazeres, “Short Pulse Generation with the CLIO FEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 846-849.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Examination of Cutouts Inner Surfaces from Nb3Sn Coated Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 189-192. doi:10.18429/JACoW-LINAC2016-MOPLR023
[n] Y.-M. Shin, D. R. Broemmelsiek, D. J. Crawford, A. H. Lumpkin, and A. T. Green, “Study on Beam Modulation Technique using a Masked Chicane at FAST (Fermilab Accelerator Science and Technology) Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 665-668. doi:10.18429/JACoW-FEL2015-WEP045
[n] S. Venkatesan et al., “Engineering Challenges in BioSAXS for Australian Synchrotron”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 224. doi:10.18429/JACoW-MEDSI2020-WEOB01
[n] G. Melin et al., “Electron Cyclotron Resonance Sources of Multicharged Ions: State of the Art, Recent Developments and Prospects”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 117-120.
[n] D. R. Beverstock, M. J. Kelley, C. E. Reece, J. K. Spradlin, and A-M. Valente-Feliciano, “Surface Characterization of NbTiN Films for Accelerator Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3975-3977. doi:10.18429/JACoW-IPAC2018-THPAL142
[n] S. V. Ivanov et al., “Equivalent Scheme and Parameters of Disc Loaded Waveguide at Dipole Mode”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP076L, pp. 2044-2046.
[n] F. A. Harfoush and S. A. Bogacz, “Coherent Beatron Instability Driven by Electrostatic Separators - Stability Analysis of the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1172-1175.
[n] C. L. Dawson, D. M. Dykes, and P. A. McIntosh, “The Tuning of the Cavity Options for DIAMOND”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P037, pp. 2956-2958.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Lucas Rodriguez, “Estimation of the Response Time and Data Flows in the TOTEM DCS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL021, pp. 171-173.
- S. Luo, D. B. Liao, S. Liu, F. Yang, Z. G. Yin, and T. J. Zhang, “Visual Scenery Technology Study on Cyclotron and Communication Equipment Operation Simulation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP006, pp. 4785-4787.
- M. Behtouei, L. Faillace, M. Migliorati, L. Palumbo, and B. Spataro, “New Analytical Derivation of Group Velocity in TW Accelerating Structures”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 155-158.
- Yu. P. Severgin and I. A. Shukeilo, “Ion Pulse Compressor and Stretcher Ring for Linear Meson Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2709-2712.
- A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1250-1253.
- P. Beasley and O. Heid, “Progress Towards A Novel Compact High Voltage Electrostatic Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP207, pp. 1876-1878.
- N. Simos, P. K. Job, and N. V. Mokhov, “An Experimental Study of Radiation-induced Demagnetization of Insertion Device Permanent Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC053, pp. 2112-2114.
- G. Carron and L. Thorndahl, “Progress with the CLIC Transfer Structures (CTS)”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2167-2170.
- R. Geller, “Invited Paper: Multiply Charged ECR Ion Sources for Particle Accelerators”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-01, pp. 699-706.
- C. Deiter, M. Kitel, and J. Schulz, “A Rapid Two Axis Scanner for Vacuum Environments With High EMP”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPA15, pp. XX-XX.
- F. Glotin, J.-M. Berset, R. Chaput, D. Jaroszynski, J.-M. Ortega, and R. Prazeres, “Short Pulse Generation with the CLIO FEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 846-849.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Examination of Cutouts Inner Surfaces from Nb3Sn Coated Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 189-192.
- Y.-M. Shin, D. R. Broemmelsiek, D. J. Crawford, A. H. Lumpkin, and A. T. Green, “Study on Beam Modulation Technique using a Masked Chicane at FAST (Fermilab Accelerator Science and Technology) Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 665-668.
- S. Venkatesan et al., “Engineering Challenges in BioSAXS for Australian Synchrotron”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 224.
- G. Melin et al., “Electron Cyclotron Resonance Sources of Multicharged Ions: State of the Art, Recent Developments and Prospects”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 117-120.
- D. R. Beverstock, M. J. Kelley, C. E. Reece, J. K. Spradlin, and A-M. Valente-Feliciano, “Surface Characterization of NbTiN Films for Accelerator Applications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3975-3977.
- S. V. Ivanov et al., “Equivalent Scheme and Parameters of Disc Loaded Waveguide at Dipole Mode”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP076L, pp. 2044-2046.
- F. A. Harfoush and S. A. Bogacz, “Coherent Beatron Instability Driven by Electrostatic Separators - Stability Analysis of the Tevatron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1172-1175.
- C. L. Dawson, D. M. Dykes, and P. A. McIntosh, “The Tuning of the Cavity Options for DIAMOND”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P037, pp. 2956-2958.
Back to search