Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Awschalom, T. Borak, H. Howe, F. Schamber, R. Shafer, and D. Theriot, “Novel Instrumentation for Radiation Monitoring at NAL”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 748-750.
[n] Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
[n] R. Fedele, V. I. Man, G. Miele, and S. de Nicola, “Evolution of an Off-Axis Coherent State for Particle Beams in the Presence of Small Aberrations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP030G, pp. 1353-1355.
[n] W. L. Menninger et al., “Cyclotron Autoresonance Maser (CARM) Amplifiers for RF Accelerator Drivers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 754-757.
[n] M. Ostrega et al., “Development, Commissioning and Operation of the Large Scale CO2 Detector Cooling Systems for CMS Pixel Phase I Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1478-1481. doi:10.18429/JACoW-ICALEPCS2017-THPHA050
[n] A. C. Ceballos et al., “Fabrication and Demonstration of a Silicon Buried Grating Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2717-2719. doi:10.18429/JACoW-IPAC2015-WEPJE021
[n] L. Sabato et al., “Longitudinal Phase Space Measurement at the ELI-NP Compton Gamma Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 732-735. doi:10.18429/JACoW-IBIC2016-WEPG44
[n] R. Martinie et al., “Cooling and thermomechanical studies for the impact tattoos beam dump design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2522-2525. doi:10.18429/JACoW-IPAC2023-TUPM126
[n] E. L. Garwin, “Applications of Vacuum Technology to Novel Accelerator Problems”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2758-2763.
[n] T. A. Trainor, E. G. Adelberger, W. B. Ingalls, and H. E. Swanson, “A Comparison of Sona and Spin-Filter Polarization Schemes for a Lamb-Shift Polarized Ion Source”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1527-1530.
[n] D. W. Storey, R. E. Laxdal, and N. Muller, “Alternative Fabrication Methods for the ARIEL e-Linac SRF Separator Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB043, pp. 1185-1186.
[n] S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 407-409. doi:10.18429/JACoW-IPAC2022-MOPOPT063
[n] A. Balkcum and T. W. Habermann, “RF Sources for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI01, pp. 2684-2684.
[n] C. Huang et al., “Physics of Electron Beam Generation and Dynamics From Diamond Field Emitter Arrays”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2137-2139. doi:10.18429/JACoW-IPAC2019-TUPTS091
[n] E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
[n] C. E. Crist et al., “Time Resolved, 2-D Hard X-ray Imaging of Relativistic Electron-Beam Target Interactions on ETA-II”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4062, pp. 195-197.
[n] D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX.
[n] K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
[n] S. Xu, R. Laird, F. Lenkszus, and H. Shang, “EPICS IOCcore Real-Time Performance Measurements on Coldfire Module”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL033, pp. 94-96.
[n] W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 575-578.
[n] D. J. Clark, A. U. Luccio, F. Resmini, and H. Meiner, “Operation of the Polarised Ion Source and Axial Injection System for the 88-in Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G03, pp. XX-XX.
[n] D. R. Struthers, “Automatic Control of the Trim-Coil Power Supplies at the Berkeley 88-Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-008, pp. XX-XX.
[n] M. T. Lynch, S.-I. Kwon, A. H. Regan, and Y.-M. Wang, “Excess RF Power Required for RF Control of the Spallation Neutron Source (SNS) Linac, a Pulsed High-Intensity Superconducting Proton Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA010, pp. 503-505.
[n] D. Carter and T. Nishikawa, “Aperture and Cell Size Effects on Shunt Impedance of Alternating Periodic Structures”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-04, pp. 104-108.
[n] G. Bernardini, “Physics of Meson Factories”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63C02, pp. XX-XX.
[n] M. Cavenago, V. Antoni, T. Kulevoy, S. Petrenko, G. Serianni, and P. Veltri, “NIO1 a Versatile Negative Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC053, pp. 4176-4178.
[n] E. Gero, P. Chen, and W. Kozanecki, “Beam Spot Size Measurement Using Beamstrahlung Signals at the SLC Interaction Point”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1207-1210.
[n] V. S. Kashikhin et al., “Design of Helical Solenoid Combined with RF Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB051, pp. 382-384.
[n] A. Ratti et al., “Design of an RFQ-Based Neutron Source for Cargo Container Interrogation”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP005, pp. 253-255.
[n] F. Bonaccorso, A. Busato, A. Curri, D. Favretto, M. Prica, and M. Pugliese, “Virtually There: The Control Room of the Future”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB10, pp. 418-420.
[n] M. Gehlot, R. Khullar, G. Mishra, H. Jeevakhan, and G. Sharma, “Undulator Development Activities at DAVV-Indore”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 133-137. doi:10.18429/JACoW-FLS2018-WEP2PT030
[n] C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 503-506.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Awschalom, T. Borak, H. Howe, F. Schamber, R. Shafer, and D. Theriot, “Novel Instrumentation for Radiation Monitoring at NAL”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 748-750.
- Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
- R. Fedele, V. I. Man, G. Miele, and S. de Nicola, “Evolution of an Off-Axis Coherent State for Particle Beams in the Presence of Small Aberrations”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP030G, pp. 1353-1355.
- W. L. Menninger et al., “Cyclotron Autoresonance Maser (CARM) Amplifiers for RF Accelerator Drivers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 754-757.
- M. Ostrega et al., “Development, Commissioning and Operation of the Large Scale CO2 Detector Cooling Systems for CMS Pixel Phase I Upgrade”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1478-1481.
- A. C. Ceballos et al., “Fabrication and Demonstration of a Silicon Buried Grating Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2717-2719.
- L. Sabato et al., “Longitudinal Phase Space Measurement at the ELI-NP Compton Gamma Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 732-735.
- R. Martinie et al., “Cooling and thermomechanical studies for the impact tattoos beam dump design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM126, pp. 2522-2525.
- E. L. Garwin, “Applications of Vacuum Technology to Novel Accelerator Problems”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2758-2763.
- T. A. Trainor, E. G. Adelberger, W. B. Ingalls, and H. E. Swanson, “A Comparison of Sona and Spin-Filter Polarization Schemes for a Lamb-Shift Polarized Ion Source”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1527-1530.
- D. W. Storey, R. E. Laxdal, and N. Muller, “Alternative Fabrication Methods for the ARIEL e-Linac SRF Separator Cavity”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB043, pp. 1185-1186.
- S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 407-409.
- A. Balkcum and T. W. Habermann, “RF Sources for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI01, pp. 2684-2684.
- C. Huang et al., “Physics of Electron Beam Generation and Dynamics From Diamond Field Emitter Arrays”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2137-2139.
- E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
- C. E. Crist et al., “Time Resolved, 2-D Hard X-ray Imaging of Relativistic Electron-Beam Target Interactions on ETA-II”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4062, pp. 195-197.
- D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX.
- K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
- S. Xu, R. Laird, F. Lenkszus, and H. Shang, “EPICS IOCcore Real-Time Performance Measurements on Coldfire Module”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL033, pp. 94-96.
- W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 575-578.
- D. J. Clark, A. U. Luccio, F. Resmini, and H. Meiner, “Operation of the Polarised Ion Source and Axial Injection System for the 88-in Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G03, pp. XX-XX.
- D. R. Struthers, “Automatic Control of the Trim-Coil Power Supplies at the Berkeley 88-Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-008, pp. XX-XX.
- M. T. Lynch, S.-I. Kwon, A. H. Regan, and Y.-M. Wang, “Excess RF Power Required for RF Control of the Spallation Neutron Source (SNS) Linac, a Pulsed High-Intensity Superconducting Proton Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAA010, pp. 503-505.
- D. Carter and T. Nishikawa, “Aperture and Cell Size Effects on Shunt Impedance of Alternating Periodic Structures”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-04, pp. 104-108.
- G. Bernardini, “Physics of Meson Factories”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63C02, pp. XX-XX.
- M. Cavenago, V. Antoni, T. Kulevoy, S. Petrenko, G. Serianni, and P. Veltri, “NIO1 a Versatile Negative Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC053, pp. 4176-4178.
- E. Gero, P. Chen, and W. Kozanecki, “Beam Spot Size Measurement Using Beamstrahlung Signals at the SLC Interaction Point”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1207-1210.
- V. S. Kashikhin et al., “Design of Helical Solenoid Combined with RF Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB051, pp. 382-384.
- A. Ratti et al., “Design of an RFQ-Based Neutron Source for Cargo Container Interrogation”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP005, pp. 253-255.
- F. Bonaccorso, A. Busato, A. Curri, D. Favretto, M. Prica, and M. Pugliese, “Virtually There: The Control Room of the Future”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB10, pp. 418-420.
- M. Gehlot, R. Khullar, G. Mishra, H. Jeevakhan, and G. Sharma, “Undulator Development Activities at DAVV-Indore”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 133-137.
- C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 503-506.
Back to search