Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. C. Snowdon, “Effect of Random Fluctuations on Synchrotron Phase Motion”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 889-892.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] M. Kireeff Covo et al., “Trim Coil Unbalance of the 88-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH016, pp. 254-256.
[n] J. Rodríguez Pérez, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and P. Martín-Luna, “Optimization of nanostructured plasmas for laser wakefield acceleration using a Bayesian algorithm”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1064-1067. doi:10.18429/JACoW-IPAC2024-TUPC29
[n] V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413.
[n] D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
[n] G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239.
[n] R. Ferreira, A. Giannoulas, A. Rocha, and L. Cantu, “Implementation and scalability analysis of TSPP for Vacuum Framework”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 983-989. doi:10.18429/JACoW-ICALEPCS2025-WEMG019
[n] M. Fabretto, A. Rindi, and G. Tromba, “Health Physics Approach to Synchrotron Radiation”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1386-1389.
[n] S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 403-405.
[n] P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183.
[n] H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2818-2821.
[n] C. Prados and T. Fleck, “FEC in Deterministic Control Systems over Gigabit Ethernet”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL011, pp. 147-149.
[n] K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 333. doi:10.18429/JACoW-MEDSI2020-WEPC13
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] A. V. Fedotov et al., “Simulations of High-Energy Electron Cooling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT090, pp. 4251-4253.
[n] M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n] K. Zagar, M. Plesko, R. Sabjan, and I. Verstovsek, “Co-sourcing Development of Accelerator Controls”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT097, pp. 758-760.
[n] S. J. Bean et al., “A New Ultra-Stable Variable Projection Microscope for the APS Upgrade of 32-ID”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 211. doi:10.18429/JACoW-MEDSI2020-TUPC15
[n] C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 112-115. doi:10.18429/JACoW-MEDSI2016-TUAA02
[n] P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
[n] G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
[n] Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-Cell Cavity (3)”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 470-471. doi:10.18429/JACoW-SRF2019-TUP028
[n] D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 414-418.
[n] S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
[n] V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1272-1275. doi:10.18429/JACoW-IPAC2018-TUPMF012
[n] A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
[n] M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
[n] S. Posen et al., “A Booster Replacement Linac for the Future of High Energy Physics at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL116, unpublished.
[n] M. Farkhondeh et al., “Status of the MIT-Bates South Hall Ring Commissioning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2054-2057.
[n] X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
[n] J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
[n] M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
[n] V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 491-493. doi:10.18429/JACoW-LINAC2018-TUPO068
[n] J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
[n] K. N. Nii et al., “Nb Single-cell Cavity Vertical Electro-polishing with Ninja Cathode and Evaluation of its Accelerating Gradient”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 612-615. doi:10.18429/JACoW-SRF2017-TUPB093
[n] S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
[n] Q. Zhao, V. A. Andreev, J. Brandon, G. Machicoane, and F. Marti, “Experimental Studies of the ReA3 Triple-Harmonic Buncher”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP059, pp. 1686-1686.
[n] P. P. Goryl, A. I. Wawrzyniak, M. Sj?Âstr?Âm, and T. Szymocha, “An Implementation of the Virtual Accelerator in the Tango Control System”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper MOSBC3, pp. 23-25.
[n] R. Tom?ís et al., “First Beta-Beating Measurement in the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP021, pp. 2531-2533.
[n] J. G. Alessi et al., “High-Performance EBIS for RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRYAB02, pp. 3782-3785.
[n] J. T. Maniscalco, D. Gonnella, D. L. Hall, P. N. Koufalis, and M. Liepe, “Pulsed Field Limits in SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2341-2343. doi:10.18429/JACoW-IPAC2016-WEPMR030
[n] I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3147-3150. doi:10.18429/JACoW-IPAC2023-WEPL018
[n] M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n] F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 374-377. doi:10.18429/JACoW-ICALEPCS2015-MOPGF125
[n] S. Pioli et al., “The Turn-key Control System for the ELI-NP Gamma Beam System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4091-4093. doi:10.18429/JACoW-IPAC2016-THPOY003
[n] R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
[n] K. N. Nii et al., “Development of New Type Ninja" Cathode for Nb 9-cell Cavity and Experiment of Vertical Electro-Polishing"”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 223-225. doi:10.18429/JACoW-LINAC2016-MOPLR039
For LaTeX
Use Complete Form
For BibTeX
References
- S. C. Snowdon, “Effect of Random Fluctuations on Synchrotron Phase Motion”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 889-892.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- M. Kireeff Covo et al., “Trim Coil Unbalance of the 88-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH016, pp. 254-256.
- J. Rodríguez Pérez, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and P. Martín-Luna, “Optimization of nanostructured plasmas for laser wakefield acceleration using a Bayesian algorithm”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC29, pp. 1064-1067.
- V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413.
- D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
- G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239.
- R. Ferreira, A. Giannoulas, A. Rocha, and L. Cantu, “Implementation and scalability analysis of TSPP for Vacuum Framework”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 983-989.
- M. Fabretto, A. Rindi, and G. Tromba, “Health Physics Approach to Synchrotron Radiation”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1386-1389.
- S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 403-405.
- P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183.
- H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2818-2821.
- C. Prados and T. Fleck, “FEC in Deterministic Control Systems over Gigabit Ethernet”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL011, pp. 147-149.
- K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 333.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- A. V. Fedotov et al., “Simulations of High-Energy Electron Cooling”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT090, pp. 4251-4253.
- M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1158-1161.
- K. Zagar, M. Plesko, R. Sabjan, and I. Verstovsek, “Co-sourcing Development of Accelerator Controls”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT097, pp. 758-760.
- S. J. Bean et al., “A New Ultra-Stable Variable Projection Microscope for the APS Upgrade of 32-ID”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 211.
- C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 112-115.
- P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
- G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
- Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-Cell Cavity (3)”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 470-471.
- D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 414-418.
- S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
- V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1272-1275.
- A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
- M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
- S. Posen et al., “A Booster Replacement Linac for the Future of High Energy Physics at Fermilab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL116, unpublished.
- M. Farkhondeh et al., “Status of the MIT-Bates South Hall Ring Commissioning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2054-2057.
- X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
- J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
- M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
- V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 491-493.
- J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
- K. N. Nii et al., “Nb Single-cell Cavity Vertical Electro-polishing with Ninja Cathode and Evaluation of its Accelerating Gradient”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 612-615.
- S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
- Q. Zhao, V. A. Andreev, J. Brandon, G. Machicoane, and F. Marti, “Experimental Studies of the ReA3 Triple-Harmonic Buncher”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP059, pp. 1686-1686.
- P. P. Goryl, A. I. Wawrzyniak, M. Sj?Âstr?Âm, and T. Szymocha, “An Implementation of the Virtual Accelerator in the Tango Control System”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper MOSBC3, pp. 23-25.
- R. Tom?ís et al., “First Beta-Beating Measurement in the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP021, pp. 2531-2533.
- J. G. Alessi et al., “High-Performance EBIS for RHIC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRYAB02, pp. 3782-3785.
- J. T. Maniscalco, D. Gonnella, D. L. Hall, P. N. Koufalis, and M. Liepe, “Pulsed Field Limits in SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2341-2343.
- I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL018, pp. 3147-3150.
- M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 352-354.
- F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 374-377.
- S. Pioli et al., “The Turn-key Control System for the ELI-NP Gamma Beam System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4091-4093.
- R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
- K. N. Nii et al., “Development of New Type Ninja" Cathode for Nb 9-cell Cavity and Experiment of Vertical Electro-Polishing"”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 223-225.
Back to search