JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. Naito et al., “Advanced Copper Lining for Accelerator Components”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE20, pp. 1015-1017. 
[n]	V. Skalyga, A. Bokhanov, S. Golubev, I. Izotov, and S. S. Vybin, “A High Current Pure Proton Beam Source Prototype”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper THC02, unpublished. 
[n]	X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1852-1855. doi:10.18429/JACoW-IPAC2023-TUPL043
[n]	R. L. Lapin et al., “Gasdynamic ECR Tandem Ion Source for Negative Hydrogen Ion Production”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 191-194. doi:10.18429/JACoW-ECRIS2018-THA5
[n]	R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573. 
[n]	G. S. Mauro et al., “Numerical Simulation and Beam-Dynamics Study of a Hollow-Core Woodpile Coupler for Dielectric Laser Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2022-2025. doi:10.18429/JACoW-IPAC2021-TUPAB246
[n]	A. Alexopoulos et al., “First LHC Transverse Beam Size Measurements With the Beam Gas Vertex Detector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1240-1243. doi:10.18429/JACoW-IPAC2017-TUOAB1
[n]	S. Golubev et al., “Point-like Neutron Emission Observation Using a Neutron Generator Based on a Gasdynamic ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 185-187. doi:10.18429/JACoW-ECRIS2018-THA2
[n]	S. Vlachos et al., “The LHC Beam Gas Vertex Detector - a Non-Invasive Profile Monitor for High Energy Machines”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 323-329. doi:10.18429/JACoW-IBIC2017-WE3AB1
[n]	Yu. P. Bouzouloukov et al., “Beam Transport and Special Undulators Designed for High Power FELs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP106G, pp. 742-744. 
[n]	A. Vodopyanov, S. Golubev, I. Izotov, A. Mansfeld, and G. Yushkov, “He2+ Source Based on Penning Discharge with Additional 75 GHz ECR Heating”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT008, pp. 54-54. 
[n]	M. Mousavinia, H. Afarideh, and M. Ghergherehchi, “Design and Simulation of Cavity for 18 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 267-269. doi:10.18429/JACoW-Cyclotrons2016-WEB03
[n]	J. Branlard et al., “Equipping FLASH with MTCA.4-based LLRF System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP085, pp. 1126-1128. 
[n]	O. V. Chubar et al., “Novel Opportunities for Sub-meV Inelastic X-Ray Scattering Experiments at High-Repetition Rate Self-seeded XFELs”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 257-262. doi:10.18429/JACoW-FEL2015-MOP086
[n]	D. P. May et al., “Status of the Texas A&M University Cyclotron Institute”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 281-284. doi:10.18429/JACoW-Cyclotrons2016-THA04
[n]	M. R. Clausen, M. Moeller, S. Rettig-Labusga, and B. Schoeneburg, “What it Takes to Make a System Reliable”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD02, pp. 139-141. 
[n]	P. Ferracin et al., “Field Quality Analysis of a Second Generation IR Quadrupole for the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE021, pp. 1984-1986. 
[n]	N. V. Mokhov et al., “Energy Deposition Limits in a Nb3Sn Separation Dipole in Front of the LHC High-Luminosity Inner Triplet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB065, pp. 1748-1750. 
[n]	F. H. Raab, “High-Efficiency 500-W RF-Power Modules for UHF”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 174-176. doi:10.18429/JACoW-NAPAC2016-MOPOB51
[n]	M. Ohno et al., “Performance of the Vacuum System for SORTEC 1 GeV Electron Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1335-1338. 
[n]	R. Corsini et al., “Fast Vertical Beam Instability in the CTF3 Combiner Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP011, pp. 574-576. 
[n]	M. Takanaka et al., “Control System of the 1 GeV Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 836-839. 
[n]	O. V. Chubar, A. S. Khlebnikov, N. V. Smolyakov, and S. V. Tolmachev, “A VUV-wiggler Scheme with Non-sinusoidal Magnetic Field Profile for High Energy Storage Rings”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP109G, pp. 2558-2560. 
[n]	J. Payet et al., “Design of an Interaction Region with Head-on Collisions for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS060, pp. 682-684. 
[n]	P. Fernandes, R. Parodi, and G. Sabbi, “The Extension of the OSCAR2D Code to Compute Azimuthally Dependent Modes of Axially Symmetric Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 366-369. 
[n]	F. Bouly et al., “Developments and Tests of a 700 MHz Cryomodule for the Superconducting Linac of MYRRHA”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP057, pp. 250-254. 
[n]	T. A. Puntambekar et al., “Experience of Beam Diagnostic Systems in Commissioning Stage of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA065, pp. 413-415. 
[n]	A. D. McInturff, J.M. van Oort, and R. M. Scanlan, “Two Alternate High Gradient Quadrupoles; An Upgraded Tevatron IR and a "Pipe" Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ07, pp. 1402-1404. 
[n]	H. Fauska, J. S. Heagney, T. J. Morgan, and F. H. Schmidt, “Terminal Voltage Fluctuations of an FN Tandem Van De Graaff Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 166-169. 
[n]	T. Lamy et al., “60 GHz ECR Ion Sources”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2I01, pp. 277-281. 
[n]	S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149. 
[n]	F. H. Schmidt, “External Beam Focusing System”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F02, pp. 257-261. 
[n]	L. Emery et al., “The 1.2 GeV High Brightness Photon Source at the Stanford Photon Research Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1496-1499. 
[n]	N. J. Caling, H. Fauska, and F. H. Schmidt, “Suppression of Vertical Jitter" of the Beam from an Inclined Field Tube 3-Stage FN-Type Tandem Van de Graaff Accelerator"”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 96-98. 
[n]	F. H. Schmidt, “Beam Quality for Nuclear Scattering and Reaction Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D09, pp. 216-219. 
[n]	G. Favre et al., “Manufacturing the Linac4 PI-mode Structure Prototype at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS100, pp. 1774-1776. 
[n]	D. Belohrad et al., “Upgrade of the Fast Beam Intensity Measurement System for the CERN PS Complex”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF03, pp. 525-529. 
[n]	G. P. Williams et al., “Calculations and Mitigation of THz Mirror Heating at the Jefferson Lab FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP058, pp. XX-XX. 
[n]	C. Cork, J. Fox, and R. Melen, “A Network Real Time Control System for the Stanford Photon Research Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 716-719. 
[n]	C. Compton et al., “Superconducting Resonator Production for Ion Linac at Michigan State University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO055, pp. 226-228. 
[n]	D. Ressmann, A. Kopmann, V. Mauch, W. Mexner, and A. Vondrous, “Data Management at the Synchrotron Radiation Facility ANKA”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO202, pp. 13-15. 
[n]	H. L. Phillips, K. Macha, and A-M. Valente-Feliciano, “Design and Commissioning Status of New Cylindrical HiPIMS Nb Coating System for SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP075, pp. 617-619. 
[n]	M. R. Clausen et al., “RF Heat Load Compensation for the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 348-351. doi:10.18429/JACoW-ICALEPCS2017-TUMPA06
[n]	F. Briquez et al., “Construction of Short Period APPLE II Type Undulators at SOLEIL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH015, pp. 265-268. 
[n]	J. P. Shanks, J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Characterization of Single Particle Dynamics for the International Linear Collider Damping Ring Lattice”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR066, pp. 1972-1974. 
[n]	E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX. 
[n]	S. Prestemon et al., “Design and Evaluation of a Short Period Nb3Sn Superconducting Undulator Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG010, pp. 1032-1034. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search