Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Brawley, F. Folsom, S. Morgan, B. Jones, R. Bennett, and C. Reece, “CEBAF Experience with In-House Production Fabrication of Niobium Parts”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J01, pp. XX-XX.
[n] R. Singh, M. Sapinski, and D. M. Vilsmeier, “Simulation Supported Profile Reconstruction With Machine Learning”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 350-354. doi:10.18429/JACoW-IBIC2017-WEPCC06
[n] S. Maier, M. Brosi, A. Mochihashi, A.-S. M??ller, M. J. Nasse, and M. Schwarz, “Impedance Studies of a Corrugated Pipe for KARA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2039-2042. doi:10.18429/JACoW-IPAC2021-TUPAB251
[n] L. M. Zheng et al., “Design of a 217 MHz VHF Gun at Tsinghua University”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2050-2053. doi:10.18429/JACoW-IPAC2019-TUPTS053
[n] A. Montelius, E. Grusell, M. Karlsson, O. Mattsson, and S. Mattsson And P, “Plans For Particle Therapy In Sweden”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 219-221.
[n] M. N. Polyanskiy, M. Babzien, M. A. Palmer, and I. Pogorelsky, “Multi-TW Picosecond Long-Wave Infrared Laser for Particle Acceleration at ATF”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THYBB6, unpublished.
[n] G. M. Wang et al., “Study of Generic Front-end Designs for ERL Based Light Sources”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN052, pp. 3345-3347.
[n] T. H. Nicol, “Multiple Element Vapor Cooled Current Leads for the Fermilab Energy Saver Correction Elements”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3317-3320.
[n] K. Shinto, H. Hama, F. Hinode, A. Miyamoto, and T. Tanaka, “Three-Dimensional Time-Domain Beam Simulation Study for a Thermionic RF Gun”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11009, pp. XX-XX.
[n] T. Katayama and J. Xia, “Lattice for Accumulator Cooler Ring for MUSES”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP038L, pp. 932-934.
[n] S. Doebert, “Status of Very High-Gradient Cavity Tests”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU202, pp. 274-278.
[n] E. Hamwi, G. Hoffstaetter, H. Huang, K. Hock, and V. Ptitsyn, “Snake matching the EIC's hadron storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1714-1717. doi:10.18429/JACoW-IPAC2024-TUPS33
[n] L. Sauer, F. Lange, J. Leibfritz, and K. Moravec, “FNAL Main Injector Dipole Installation Equipment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3864-3867.
[n] M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 258-260. doi:10.18429/JACoW-MEDSI2018-WEPH24
[n] M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1036-1039.
[n] D. T. Palmer, M. J. Hogan, M. Ferrario, and L. Serafini, “A 90 GHz Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA50, pp. 1997-1999.
[n] D. Trines, “TESLA”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TA002, pp. XX-XX.
[n] Z. A. Conway, “Raising the Bar on Superconducting Cavity Processing, and Performance”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TH101, pp. 708-711.
[n] J. Brawley, J. Mammosser, and L. Phillips, “Electron Beam Weld Parameter Set Development and Cavity Cost”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C13, pp. 518-522.
[n] J. M. Byrd, L. R. Doolittle, G. Huang, J. W. Staples, and R. B. Wilcox, “Stable Transmission of RF Signals on Optical Fiber Links”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA033, pp. 1399-1401.
[n] D. Wang, J. Chen, H. X. Deng, C. Feng, and J. Yan, “Performance Comparison of Several Double-Modulator Harmonic Generation Schemes on SDUV-FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC72, pp. 406-409.
[n] M. Ritzert, “A Database to Store EPICS Configuration Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 745-747. doi:10.18429/JACoW-ICALEPCS2017-TUPHA143
[n] D. Xu, Y. Hao, Y. Luo, C. Montag, and J. Qiang, “Full Range Tune Scan Studies Using Graphics Processing Units with CUDA in EIC Beam-Beam Simulations”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2598-2600. doi:10.18429/JACoW-IPAC2021-WEPAB010
For LaTeX
Use Complete Form
For BibTeX
References
- J. Brawley, F. Folsom, S. Morgan, B. Jones, R. Bennett, and C. Reece, “CEBAF Experience with In-House Production Fabrication of Niobium Parts”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J01, pp. XX-XX.
- R. Singh, M. Sapinski, and D. M. Vilsmeier, “Simulation Supported Profile Reconstruction With Machine Learning”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 350-354.
- S. Maier, M. Brosi, A. Mochihashi, A.-S. M??ller, M. J. Nasse, and M. Schwarz, “Impedance Studies of a Corrugated Pipe for KARA”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2039-2042.
- L. M. Zheng et al., “Design of a 217 MHz VHF Gun at Tsinghua University”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2050-2053.
- A. Montelius, E. Grusell, M. Karlsson, O. Mattsson, and S. Mattsson And P, “Plans For Particle Therapy In Sweden”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 219-221.
- M. N. Polyanskiy, M. Babzien, M. A. Palmer, and I. Pogorelsky, “Multi-TW Picosecond Long-Wave Infrared Laser for Particle Acceleration at ATF”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THYBB6, unpublished.
- G. M. Wang et al., “Study of Generic Front-end Designs for ERL Based Light Sources”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN052, pp. 3345-3347.
- T. H. Nicol, “Multiple Element Vapor Cooled Current Leads for the Fermilab Energy Saver Correction Elements”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3317-3320.
- K. Shinto, H. Hama, F. Hinode, A. Miyamoto, and T. Tanaka, “Three-Dimensional Time-Domain Beam Simulation Study for a Thermionic RF Gun”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11009, pp. XX-XX.
- T. Katayama and J. Xia, “Lattice for Accumulator Cooler Ring for MUSES”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP038L, pp. 932-934.
- S. Doebert, “Status of Very High-Gradient Cavity Tests”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU202, pp. 274-278.
- E. Hamwi, G. Hoffstaetter, H. Huang, K. Hock, and V. Ptitsyn, “Snake matching the EIC's hadron storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS33, pp. 1714-1717.
- L. Sauer, F. Lange, J. Leibfritz, and K. Moravec, “FNAL Main Injector Dipole Installation Equipment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3864-3867.
- M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 258-260.
- M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1036-1039.
- D. T. Palmer, M. J. Hogan, M. Ferrario, and L. Serafini, “A 90 GHz Photoinjector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA50, pp. 1997-1999.
- D. Trines, “TESLA”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TA002, pp. XX-XX.
- Z. A. Conway, “Raising the Bar on Superconducting Cavity Processing, and Performance”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TH101, pp. 708-711.
- J. Brawley, J. Mammosser, and L. Phillips, “Electron Beam Weld Parameter Set Development and Cavity Cost”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C13, pp. 518-522.
- J. M. Byrd, L. R. Doolittle, G. Huang, J. W. Staples, and R. B. Wilcox, “Stable Transmission of RF Signals on Optical Fiber Links”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA033, pp. 1399-1401.
- D. Wang, J. Chen, H. X. Deng, C. Feng, and J. Yan, “Performance Comparison of Several Double-Modulator Harmonic Generation Schemes on SDUV-FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC72, pp. 406-409.
- M. Ritzert, “A Database to Store EPICS Configuration Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 745-747.
- D. Xu, Y. Hao, Y. Luo, C. Montag, and J. Qiang, “Full Range Tune Scan Studies Using Graphics Processing Units with CUDA in EIC Beam-Beam Simulations”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2598-2600.
Back to search