Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. L. Martin, “The ACCTEK Proton Medical Accelerator and Beam Delivery System for Cancer Therapy and Radiography”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1802-1805.
[n] C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n] M. Incurvati, T. Margreiter, T. Riedler, and R. St?ñrz, “High Precision Four Quadrant Converter with GaN Technology”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2431-2434. doi:10.18429/JACoW-IPAC2021-TUPAB389
[n] C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
[n] G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343.
[n] Z. Xue, J. P. Dai, L. Cheng, and Y. Yang, “Preliminary Hardware Implementation of Compensation Mechanism of Superconducting Cavity Failure in C-ADS Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 953-955. doi:10.18429/JACoW-IPAC2015-MOPTY008
[n] Y. S. Derbenev et al., “ELIC at CEBAF”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP015, pp. 1437-1439.
[n] C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n] J.-P. Carneiro, S. U. Hansen, A. Ibrahim, V. D. Shiltsev, J. Steimel, and R. C. Webber, “First Results of a Digital Beam Phase Monitor at the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT015, pp. 1428-1430.
[n] J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
[n] H. Anamkath et al., “Design and Factory Test of the e+/e- Frascati Linear Accelerator for DAPhi;NE”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-64, pp. 213-215.
[n] R. Merl, F. Gallegos, C. Pillai, and F. Shelley, “High Speed Epics Data Acquisition and Processing on One VME Board”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB048, pp. 2518-2520.
[n] S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356.
[n] P. F. Tavares et al., “Commissioning of the Max IV Light Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 439-444. doi:10.18429/JACoW-NAPAC2016-TUB3IO01
[n] K. Shroff, G. Carcassi, and R. Lange, “Multi Channel Applications for Control System Studio (CSS)”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN015, pp. 271-273.
[n] H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 997-1000.
[n] G. Horlitz, M. Clausen, H. Herzog, R. Lange, and H. Lierl, “The Cryogenic Operation of the Superconducting Magnet System in the HERA Proton Storage Ring: Cool Down, Steady State Operation, Quench Recovery Processes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2319-2322.
[n] L. Faillace et al., “High-power Tests and Initial Electron Beam Measurements of the New High-gradient Normal Conducting RF Photoinjector System for the Sincrotrone Trieste”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM27, pp. 694-696.
[n] H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
[n] D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 111-114. doi:10.18429/JACoW-IBIC2023-MOP038
[n] D. Jia, Z. Xu, W. Chen, Y. Chu, C. Su, and Z. Wang, “Design of an E x B chopper based on permanent magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1446-1449. doi:10.18429/JACoW-IPAC2023-TUPA049
[n] S.-Y. Lin, A.-Y. Chen, and C.-C. Liu, “Passive Radiation Detection Using TLD in NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS025, unpublished.
[n] G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1422-1425.
[n] J. Flowerdew, H. Damerau, R. Heine, I. Karpov, and A. Lasheen, “Quadrupole pumping for bunch shortening in the Proton Synchrotron and Super Proton Synchrotron at CERN”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS028, unpublished.
[n] P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
[n] H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
[n] W. Lawson et al., “A High Peak Power, X-Band Gyroklystron for Linear Accelerators”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-50, pp. 166-168.
[n] D. W. Feldman et al., “Combined Thermionic and Photoelectric Emission from Dispenser Cathodes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH024, pp. 2132-2134.
[n] Y. Luo and Z. Y. Guo and C, “ANALYSIS OF THE ION INDUCED COUPLED BUNCH INSTABILITY OBSERVED IN BEPC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP051, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. L. Martin, “The ACCTEK Proton Medical Accelerator and Beam Delivery System for Cancer Therapy and Radiography”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1802-1805.
- C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 413-419.
- M. Incurvati, T. Margreiter, T. Riedler, and R. St?ñrz, “High Precision Four Quadrant Converter with GaN Technology”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2431-2434.
- C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
- G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343.
- Z. Xue, J. P. Dai, L. Cheng, and Y. Yang, “Preliminary Hardware Implementation of Compensation Mechanism of Superconducting Cavity Failure in C-ADS Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 953-955.
- Y. S. Derbenev et al., “ELIC at CEBAF”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP015, pp. 1437-1439.
- C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- J.-P. Carneiro, S. U. Hansen, A. Ibrahim, V. D. Shiltsev, J. Steimel, and R. C. Webber, “First Results of a Digital Beam Phase Monitor at the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT015, pp. 1428-1430.
- J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
- H. Anamkath et al., “Design and Factory Test of the e+/e- Frascati Linear Accelerator for DAPhi;NE”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-64, pp. 213-215.
- R. Merl, F. Gallegos, C. Pillai, and F. Shelley, “High Speed Epics Data Acquisition and Processing on One VME Board”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB048, pp. 2518-2520.
- S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356.
- P. F. Tavares et al., “Commissioning of the Max IV Light Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 439-444.
- K. Shroff, G. Carcassi, and R. Lange, “Multi Channel Applications for Control System Studio (CSS)”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN015, pp. 271-273.
- H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 997-1000.
- G. Horlitz, M. Clausen, H. Herzog, R. Lange, and H. Lierl, “The Cryogenic Operation of the Superconducting Magnet System in the HERA Proton Storage Ring: Cool Down, Steady State Operation, Quench Recovery Processes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2319-2322.
- L. Faillace et al., “High-power Tests and Initial Electron Beam Measurements of the New High-gradient Normal Conducting RF Photoinjector System for the Sincrotrone Trieste”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM27, pp. 694-696.
- H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
- D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP038, pp. 111-114.
- D. Jia, Z. Xu, W. Chen, Y. Chu, C. Su, and Z. Wang, “Design of an E x B chopper based on permanent magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA049, pp. 1446-1449.
- S.-Y. Lin, A.-Y. Chen, and C.-C. Liu, “Passive Radiation Detection Using TLD in NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS025, this conference.
- G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1422-1425.
- J. Flowerdew, H. Damerau, R. Heine, I. Karpov, and A. Lasheen, “Quadrupole pumping for bunch shortening in the Proton Synchrotron and Super Proton Synchrotron at CERN”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS028, this conference.
- P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
- H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
- W. Lawson et al., “A High Peak Power, X-Band Gyroklystron for Linear Accelerators”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-50, pp. 166-168.
- D. W. Feldman et al., “Combined Thermionic and Photoelectric Emission from Dispenser Cathodes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH024, pp. 2132-2134.
- Y. Luo and Z. Y. Guo and C, “ANALYSIS OF THE ION INDUCED COUPLED BUNCH INSTABILITY OBSERVED IN BEPC”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP051, pp. XX-XX.
Back to search