Favourites
For Word
[n] M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
[n] R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA003, pp. 10-14.
[n] S. M. Oprondek et al., “Next Generation X-ray Beam Position Monitor System for the Advanced Photon Source MBA Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 99-101. doi:10.18429/JACoW-MEDSI2018-TUPH29
[n] E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n] G. Vecchio et al., “A New Flexible and Interactive Control System for the INFN-LNS Accelerators and Beamlines”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP13, unpublished.
[n] G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129. doi:10.18429/JACoW-SRF2021-SUPTEV007
[n] K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
[n] A. V. Zlobin et al., “TEST RESULTS OF A NB3SN QUADRUPOLE COIL IMPREGNATED WITH RADIATION-RESISTANT MATRIMID 5292”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME045, pp. 3612-3614.
[n] C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 503-506.
[n] L. Garabito Ruiz, N. Evans, A. Hoover, and S. Lund, “Simulation of improved injection kicker waveforms in the SNS accumulator ring”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP02, unpublished.
[n] Y. A. Svistunov, A. P. Durkin, and A. D. Ovsyannikov, “Beam Dynamics Investigations for 433 MHz RFQ Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUCCH02, pp. 82-84.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE1-2, pp. 214-219.
[n] H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2800-2803.
For LaTeX
Use Complete Form
For BibTeX
References
- M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
- R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA003, pp. 10-14.
- S. M. Oprondek et al., “Next Generation X-ray Beam Position Monitor System for the Advanced Photon Source MBA Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 99-101.
- E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3415-3417.
- G. Vecchio et al., “A New Flexible and Interactive Control System for the INFN-LNS Accelerators and Beamlines”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP13, unpublished.
- G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129.
- K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
- A. V. Zlobin et al., “TEST RESULTS OF A NB3SN QUADRUPOLE COIL IMPREGNATED WITH RADIATION-RESISTANT MATRIMID 5292”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME045, pp. 3612-3614.
- C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 503-506.
- L. Garabito Ruiz, N. Evans, A. Hoover, and S. Lund, “Simulation of improved injection kicker waveforms in the SNS accumulator ring”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP02, unpublished.
- Y. A. Svistunov, A. P. Durkin, and A. D. Ovsyannikov, “Beam Dynamics Investigations for 433 MHz RFQ Accelerator”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUCCH02, pp. 82-84.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE1-2, pp. 214-219.
- H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2800-2803.
Back to search
