Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n] P. Dhakal, “Recent Development on Nitrogen Infusion Work Towards High Q and High Gradient”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 355-359. doi:10.18429/JACoW-SRF2019-TUFUA5
[n] N. Merminga, P. L. Morton, J. T. Seeman, and W. L. Spence, “Transverse Phase Space in the Presence of Dispersion”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 461-464.
[n] J. Borer and M. J. de Jonge, “The ISR Beam Position Monitoring System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 913-916.
[n] A. A. Arzumanov, N. K. Hamidov, A. I. Kozin, G. I. Shychikov, and S. T. Tihomirova, “Radiopharmaceutical ''Thallium-201-Chloride'' Production using Thallium-203 Irradiation by Helium-3 Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-05, pp. 216-217.
[n] P. N. Ostroumov, A. Barcikowski, A. Delannoy, S. A. Kondrashev, and J. A. Nolen, “Bunch Length Detector Based on X-Ray Produced Photoelectrons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU3GRC04, pp. 751-753.
[n] G. H. Rees, “Review of High Energy pp Colliders”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 17-22.
[n] Y. Hu, P. Cameron, D. Chabot, L. R. Dalesio, and S. L. Kramer, “Controls and Data Acquisition for NSLS-II Loss Control and Monitoring”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG005, pp. 29-31.
[n] A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602.
[n] N. Angert, K. Blasche, B. Franczak, B. Franzke, and B. Langenbeck, “The Stripper-Section of the Unilac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E08, pp. 286-290.
[n] L. Calabretta et al., “Invited Paper: Commissioning of the K800 INFN Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-02, pp. 12-19.
[n] S. Y. Lee and J. M. Wang, “Microwave Instability Across the Transition Energy”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2323-2326.
[n] S. V. Golubev, V. G. Zorin, G. G. Gulbekian, and V. B. Kutner, “Gyrotron Pumped ECR Source of Multi-Charged Ions Built in a Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-09, pp. 427-429.
[n] K. Harada et al., “Lattice and Optics Designs of the Test ERL in Japan”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 28, pp. 26-29.
[n] G. Carron, S. Myers, and L. Thorndahl, “The 50 MHz Transverse Feedback System in the CERN ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1833-1836.
[n] C. S. Mishra and D. Johnson, “Simulation of the Recycler Ring Dynamic Aperture”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA14, pp. 2647-2649.
[n] K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1830-1833.
[n] M. Jablonka, J. C. Derost, X. Hanus, J. Leroy, and L. Wartski, “Beam Diagnostics Using Transition Radiation Produced by a 100 MeV Electron Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1534-1537.
[n] M. J. Easton, M. Aslaninejad, S. Jolly, K. J. Peach, and J. K. Pozimski, “Design Optimisation and Particle Tracking Simulations for PAMELA Injector RFQ”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD060, pp. 822-824.
[n] G. Brianti, “Experience with the CERN ppbar Complex”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 1950-1957.
[n] V. Akcelik et al., “Thermal Analysis of SCRF Cavity Couplers Using Parallel Multiphysics Tool TEM3P”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP071, pp. 4473-4475.
[n] H. Panuganti, P. Piot, and C. R. Prokop, “Multiphoton Emission from Cesium Telluride Photocathodes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM25, pp. 688-690.
[n] S. Kashiwagi et al., “Status of Photo-injector System and its Application Experiment at Waseda University”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI077, pp. 1774-1776.
[n] R. Busby et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP081, pp. 4497-4499.
[n] A. Nadji et al., “Status of the SOLEIL Femtosecond X-ray Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA012, pp. 2499-2501.
[n] X. Yin et al., “Development of CW Heavy Ion Linac at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 326-328. doi:10.18429/JACoW-LINAC2018-TUPO003
[n] C. Bovet, “Advanced Beam Observation Methods for LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 259-264.
[n] Y. Tian and L.-H. Yu, “NSLS-II Fast Orbit Feedback with Individual Eigenmode Compensation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODN4, pp. 1488-1490.
[n] K. Ha et al., “NSLS-II Active Interlock System for Fast Machine Protection”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 554-557. doi:10.18429/JACoW-ICALEPCS2015-TUC3O05
[n] J.-Y. Hemery, F. Lemeilleur, R. Olsen, and K. Potter, “Background and Luminosity Monitoring at the CERN ISR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3034-3037.
[n] R. W. M??ller, S. Arai, J. Bolle, U. Kopf, and P. Sp?ñdtke, “Experimental Results with a Very-Heavy-Ion RFQ Accelerating Structure at GSI”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0011, pp. 77-79.
[n] P. Valente et al., “Long Beam Pulses With SLED Compression in DANE LINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1434-1436. doi:10.18429/JACoW-IPAC2017-TUPAB048
[n] H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213.
[n] S. R. Marques et al., “Design of Button Beam Position Monitor for the Brazilian Synchrotron Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN005, pp. 3871-3873.
[n] H. Euteneuer, K.-H. Kaiser, H.-J. Kreidel, U. Ludwig-Mertin, M. Negrazus, and S. Ratschow, “Three Dimensional Design of the Bending Magnets for a 1.5 GeV-Double Sided Microtron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP09A, pp. 1931-1933.
[n] A. L. Edelen et al., “Resonant Frequency Control for the PIP-II Injector Test RFQ: Control Framework and Initial Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 109-112. doi:10.18429/JACoW-NAPAC2016-MOPOB17
[n] D. A. Dimitrov et al., “Investigation of Charge Gain in Diamond Electron Beam Amplifiers via 3D Simulations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP082, pp. 4500-4502.
[n] M. P. Dehnel et al., “A Specialized High-Power (50 kW) Proton Beamline for BNCT”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THOAB1, pp. 1116-1118.
[n] L. S. Cardman, “The Illinois Cascade Microtron -- A Proposal for a High Duty Factor, Intermediate Energy Electron Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3267-3274.
[n] I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 554-557. doi:10.18429/JACoW-LINAC2016-TUPLR041
[n] J. F. Wagner et al., “First Attempts at using Active Halo Control at the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2486-2489. doi:10.18429/JACoW-IPAC2016-WEPMW028
[n] J. Nash et al., “Precision Measurements of the SLC Beam Energy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1550-1553.
[n] B. T. Folsom and E. Laface, “Fast Tracking of Nonlinear Dynamics in the ESS Linac Simulator via Particle-Count Invariance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3080-3082. doi:10.18429/JACoW-IPAC2016-WEPOY041
[n] K. Gubin et al., “Test of Construction for High Temperature Intense Neutron Target Prototype”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT118, pp. 1416-1418.
[n] A. Mereghetti, R. Bruce, N. Fuster-Mart?¡nez, D. Mirarchi, and S. Redaelli, “Collimation System Upgrades for the High Luminosity Large Hadron Collider and Expected Cleaning Performance in Run 3”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 681-684. doi:10.18429/JACoW-IPAC2019-MOPRB051
[n] M. Muto et al., “A Beam Diagnostic System Using SR for JLC-ATF”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-77, pp. 884-886.
[n] R. M. Sundelin, “Review of Progress in Superconducting High-Beta Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper FR2-02, pp. 840-844.
[n] F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921.
[n] H. O. C. Duarte, S. R. Marques, and D. O. Tavares, “Initial Experiences With Beam Diagnostics During Sirius Commissioning”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper MOAO02, unpublished.
[n] K. Fong et al., “Self Excited Operation for a 1.3 GHz 5-cell Superconducting Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP290, pp. 660-662.
[n] A. Jankowiak and T. Weis Institute for Accelerator Physics and Synchrotron Radiation, “Influence of transverse beam dimensions on beam position monitor signals”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS04, pp. XX-XX.
[n] M. O. A. El Ghazaly, M. H. Al-Malki, A. I. Papash, and C. P. Welsch, “Layout of an Electrostatic Storage Ring at KACST”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP044, pp. 4866-4868.
[n] F. Poirier et al., “Positron Production and Capture based on Low Energy Electrons for SuperB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB057, pp. 1650-1652.
[n] N. Gandolfo et al., “Fast Tuner Performance for a Double Spoke Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP077, pp. 1034-1036.
[n] A. Will et al., “Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2620-2623. doi:10.18429/JACoW-IPAC2018-WEPMG006
[n] B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
[n] S. Abeyratne and B. Erdelyi, “N-body Code to Demonstrate Electron Cooling”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF12, pp. 59-62.
[n] M. M. Pande, V. K. Handu, N. R. Patel, V. Rao, K. R. Shinde, and A. Soni, “Development of A 35 Kw Power Amplifier At 350 Mhz For RFQ Accelerator Based Neutron Generator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA145, pp. 526-528.
[n] G. Carron, L. Faltin, W. Schnell, and L. Thorndahl, “Experiments with Stochastic Cooling in the ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1402-1405.
[n] J. R. Zagel et al., “Third Generation Residual Gas Ionization Profile Monitors at Fermilab.”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD04, pp. 408-411.
[n] P. P. Gan, S. Huang, Y. R. Lu, S. Z. Wang, Z. X. Yuan, and K. Zhu, “Spectral Diagnostics of Argon Plasma in a 10mm Aperture Plasma Window”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2978-2981. doi:10.18429/JACoW-IPAC2017-WEPIK025
[n] S. Berry et al., “Cleanliness and Vacuum Acceptance Tests for the UHV Cavity String of the XFEL Linac”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB118, pp. 452-456.
[n] M. M. Peng, J. Shi, P. Wang, Z. Sun, and D. Zhang, “Deveopment of LLRF System for Tsinghua X-band High Power Test Facility”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 86-88. doi:10.18429/JACoW-SAP2017-MOPH25
[n] M. Yarmohammadi Satri, M. Lamehi, H. Shaker, and F. Ghasemi, “Target Investigation Driven by a 10 MeV Electron Linac for Bremsstrahlung Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1819-1821. doi:10.18429/JACoW-IPAC2017-TUPIK055
[n] T. Tanaka et al., “Simulation of Electric and Thermal Behavior of Cryogenic Three-cell Copper Accelerating Cavity for High Gradient Experiments”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 980-982. doi:10.18429/JACoW-IPAC2019-MOPTS052
[n] P. H. Williams, G. Bassi, H. L. Owen, and S. Thorin, “Collective Effects in a Short-Pulse FEL Driver”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC034, pp. 145-147.
[n] A. C. Caruso et al., “The Developments of the RF System Related to the K-800 Superconducting Cyclotron Upgrade”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 262-265. doi:10.18429/JACoW-CYCLOTRONS2019-WEA02
[n] A. J. Nelson et al., “Achieving Microfocus of the 13.5-nm FLASH Beam for Exploring Matter Under Extreme Conditions”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROB01, pp. 784-788.
[n] J. Cerino et al., “Extraction Septum Magnet for the SSRL SPEAR Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2328-2331.
[n] S. Lederer et al., “Photocathode Studies at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC072, pp. 232-234.
[n] D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3619-3622. doi:10.18429/JACoW-IPAC2018-THPAL005
[n] S. V. Badea, J. Alduino, N. Tsoupas, and J. Tuozzolo, “Building a Family of Corrector Magnets for SNS Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB046, pp. 2138-2140.
[n] K. L. Mahoney and H. P. Robertson, “Jefferson Lab IEC 61508/61511 Safety PLC Based Safety System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC002, pp. 394-396.
[n] A. A. Arzumanov, V. N. Batischev, V. I. Gerasimov, M. S. Gorkovets, and A. M. Voronin, “Alteration of the Ion Beam Emittance on the First Orbits in the Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-25, pp. 469-471.
[n] V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 529-532.
[n] A. T. Wu, H. Baumgart, and D. Gu, “TEM Study of Niobium Surfaces Treated by Different Polishing Techniques”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO041, pp. 300-304.
[n] J. A. Uythoven, E. H. R. Gaxiola, and M. A. Timmins, “Upgrade of the SPS Extraction Kickers for LHC and CNGS Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE084, pp. 2517-2519.
[n] M. Lokaichik et al., “Dedicated Proton Accelerator Complex for a Comprehensive Oncology Centre”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B03, pp. 2536-2538.
[n] G. Gatti, P. Miglietta, A. Perrone, C. Ristoscu, F. Tazzioli, and L. Cultrera, “UV Performances of Pulsed Laser Deposition Grown Mg Photocathodes”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH017, pp. 366-369.
[n] D. W. Feldman et al., “The Los Alamos Free- Electron Laser Energy-Recovery Experiment”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 221-224.
[n] N. Sei et al., “Coherent Edge Radiation Sources in Linac-Based Infrared Free-Electron Laser Facilities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 154-156. doi:10.18429/JACoW-LINAC2018-MOPO073
[n] J. Lim et al., “An Adjustable Permanent Magnet Quadrupole Final Focus System for Low Energy Experiments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB067, pp. 2192-2194.
[n] E. Al-Dmour and D. Einfeld, “The ALBA Vacuum System: Installation and Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA083, pp. 3861-3863.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3839-3842.
- P. Dhakal, “Recent Development on Nitrogen Infusion Work Towards High Q and High Gradient”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 355-359.
- N. Merminga, P. L. Morton, J. T. Seeman, and W. L. Spence, “Transverse Phase Space in the Presence of Dispersion”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 461-464.
- J. Borer and M. J. de Jonge, “The ISR Beam Position Monitoring System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 913-916.
- A. A. Arzumanov, N. K. Hamidov, A. I. Kozin, G. I. Shychikov, and S. T. Tihomirova, “Radiopharmaceutical ''Thallium-201-Chloride'' Production using Thallium-203 Irradiation by Helium-3 Ions”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper V-05, pp. 216-217.
- P. N. Ostroumov, A. Barcikowski, A. Delannoy, S. A. Kondrashev, and J. A. Nolen, “Bunch Length Detector Based on X-Ray Produced Photoelectrons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU3GRC04, pp. 751-753.
- G. H. Rees, “Review of High Energy pp Colliders”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 17-22.
- Y. Hu, P. Cameron, D. Chabot, L. R. Dalesio, and S. L. Kramer, “Controls and Data Acquisition for NSLS-II Loss Control and Monitoring”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG005, pp. 29-31.
- A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602.
- N. Angert, K. Blasche, B. Franczak, B. Franzke, and B. Langenbeck, “The Stripper-Section of the Unilac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E08, pp. 286-290.
- L. Calabretta et al., “Invited Paper: Commissioning of the K800 INFN Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-02, pp. 12-19.
- S. Y. Lee and J. M. Wang, “Microwave Instability Across the Transition Energy”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2323-2326.
- S. V. Golubev, V. G. Zorin, G. G. Gulbekian, and V. B. Kutner, “Gyrotron Pumped ECR Source of Multi-Charged Ions Built in a Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-09, pp. 427-429.
- K. Harada et al., “Lattice and Optics Designs of the Test ERL in Japan”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 28, pp. 26-29.
- G. Carron, S. Myers, and L. Thorndahl, “The 50 MHz Transverse Feedback System in the CERN ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1833-1836.
- C. S. Mishra and D. Johnson, “Simulation of the Recycler Ring Dynamic Aperture”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA14, pp. 2647-2649.
- K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1830-1833.
- M. Jablonka, J. C. Derost, X. Hanus, J. Leroy, and L. Wartski, “Beam Diagnostics Using Transition Radiation Produced by a 100 MeV Electron Beam”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1534-1537.
- M. J. Easton, M. Aslaninejad, S. Jolly, K. J. Peach, and J. K. Pozimski, “Design Optimisation and Particle Tracking Simulations for PAMELA Injector RFQ”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD060, pp. 822-824.
- G. Brianti, “Experience with the CERN ppbar Complex”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 1950-1957.
- V. Akcelik et al., “Thermal Analysis of SCRF Cavity Couplers Using Parallel Multiphysics Tool TEM3P”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP071, pp. 4473-4475.
- H. Panuganti, P. Piot, and C. R. Prokop, “Multiphoton Emission from Cesium Telluride Photocathodes”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM25, pp. 688-690.
- S. Kashiwagi et al., “Status of Photo-injector System and its Application Experiment at Waseda University”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI077, pp. 1774-1776.
- R. Busby et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP081, pp. 4497-4499.
- A. Nadji et al., “Status of the SOLEIL Femtosecond X-ray Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA012, pp. 2499-2501.
- X. Yin et al., “Development of CW Heavy Ion Linac at IMP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 326-328.
- C. Bovet, “Advanced Beam Observation Methods for LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 259-264.
- Y. Tian and L.-H. Yu, “NSLS-II Fast Orbit Feedback with Individual Eigenmode Compensation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODN4, pp. 1488-1490.
- K. Ha et al., “NSLS-II Active Interlock System for Fast Machine Protection”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 554-557.
- J.-Y. Hemery, F. Lemeilleur, R. Olsen, and K. Potter, “Background and Luminosity Monitoring at the CERN ISR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3034-3037.
- R. W. M??ller, S. Arai, J. Bolle, U. Kopf, and P. Sp?ñdtke, “Experimental Results with a Very-Heavy-Ion RFQ Accelerating Structure at GSI”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0011, pp. 77-79.
- P. Valente et al., “Long Beam Pulses With SLED Compression in DANE LINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1434-1436.
- H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213.
- S. R. Marques et al., “Design of Button Beam Position Monitor for the Brazilian Synchrotron Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN005, pp. 3871-3873.
- H. Euteneuer, K.-H. Kaiser, H.-J. Kreidel, U. Ludwig-Mertin, M. Negrazus, and S. Ratschow, “Three Dimensional Design of the Bending Magnets for a 1.5 GeV-Double Sided Microtron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP09A, pp. 1931-1933.
- A. L. Edelen et al., “Resonant Frequency Control for the PIP-II Injector Test RFQ: Control Framework and Initial Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 109-112.
- D. A. Dimitrov et al., “Investigation of Charge Gain in Diamond Electron Beam Amplifiers via 3D Simulations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP082, pp. 4500-4502.
- M. P. Dehnel et al., “A Specialized High-Power (50 kW) Proton Beamline for BNCT”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THOAB1, pp. 1116-1118.
- L. S. Cardman, “The Illinois Cascade Microtron -- A Proposal for a High Duty Factor, Intermediate Energy Electron Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3267-3274.
- I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 554-557.
- J. F. Wagner et al., “First Attempts at using Active Halo Control at the LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2486-2489.
- J. Nash et al., “Precision Measurements of the SLC Beam Energy”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1550-1553.
- B. T. Folsom and E. Laface, “Fast Tracking of Nonlinear Dynamics in the ESS Linac Simulator via Particle-Count Invariance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3080-3082.
- K. Gubin et al., “Test of Construction for High Temperature Intense Neutron Target Prototype”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT118, pp. 1416-1418.
- A. Mereghetti, R. Bruce, N. Fuster-Mart?¡nez, D. Mirarchi, and S. Redaelli, “Collimation System Upgrades for the High Luminosity Large Hadron Collider and Expected Cleaning Performance in Run 3”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 681-684.
- M. Muto et al., “A Beam Diagnostic System Using SR for JLC-ATF”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-77, pp. 884-886.
- R. M. Sundelin, “Review of Progress in Superconducting High-Beta Structures”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper FR2-02, pp. 840-844.
- F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921.
- H. O. C. Duarte, S. R. Marques, and D. O. Tavares, “Initial Experiences With Beam Diagnostics During Sirius Commissioning”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper MOAO02, unpublished.
- K. Fong et al., “Self Excited Operation for a 1.3 GHz 5-cell Superconducting Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP290, pp. 660-662.
- A. Jankowiak and T. Weis Institute for Accelerator Physics and Synchrotron Radiation, “Influence of transverse beam dimensions on beam position monitor signals”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS04, pp. XX-XX.
- M. O. A. El Ghazaly, M. H. Al-Malki, A. I. Papash, and C. P. Welsch, “Layout of an Electrostatic Storage Ring at KACST”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP044, pp. 4866-4868.
- F. Poirier et al., “Positron Production and Capture based on Low Energy Electrons for SuperB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB057, pp. 1650-1652.
- N. Gandolfo et al., “Fast Tuner Performance for a Double Spoke Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP077, pp. 1034-1036.
- A. Will et al., “Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2620-2623.
- B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
- S. Abeyratne and B. Erdelyi, “N-body Code to Demonstrate Electron Cooling”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF12, pp. 59-62.
- M. M. Pande, V. K. Handu, N. R. Patel, V. Rao, K. R. Shinde, and A. Soni, “Development of A 35 Kw Power Amplifier At 350 Mhz For RFQ Accelerator Based Neutron Generator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA145, pp. 526-528.
- G. Carron, L. Faltin, W. Schnell, and L. Thorndahl, “Experiments with Stochastic Cooling in the ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1402-1405.
- J. R. Zagel et al., “Third Generation Residual Gas Ionization Profile Monitors at Fermilab.”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD04, pp. 408-411.
- P. P. Gan, S. Huang, Y. R. Lu, S. Z. Wang, Z. X. Yuan, and K. Zhu, “Spectral Diagnostics of Argon Plasma in a 10mm Aperture Plasma Window”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2978-2981.
- S. Berry et al., “Cleanliness and Vacuum Acceptance Tests for the UHV Cavity String of the XFEL Linac”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB118, pp. 452-456.
- M. M. Peng, J. Shi, P. Wang, Z. Sun, and D. Zhang, “Deveopment of LLRF System for Tsinghua X-band High Power Test Facility”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 86-88.
- M. Yarmohammadi Satri, M. Lamehi, H. Shaker, and F. Ghasemi, “Target Investigation Driven by a 10 MeV Electron Linac for Bremsstrahlung Production”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1819-1821.
- T. Tanaka et al., “Simulation of Electric and Thermal Behavior of Cryogenic Three-cell Copper Accelerating Cavity for High Gradient Experiments”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 980-982.
- P. H. Williams, G. Bassi, H. L. Owen, and S. Thorin, “Collective Effects in a Short-Pulse FEL Driver”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC034, pp. 145-147.
- A. C. Caruso et al., “The Developments of the RF System Related to the K-800 Superconducting Cyclotron Upgrade”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 262-265.
- A. J. Nelson et al., “Achieving Microfocus of the 13.5-nm FLASH Beam for Exploring Matter Under Extreme Conditions”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROB01, pp. 784-788.
- J. Cerino et al., “Extraction Septum Magnet for the SSRL SPEAR Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2328-2331.
- S. Lederer et al., “Photocathode Studies at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC072, pp. 232-234.
- D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3619-3622.
- S. V. Badea, J. Alduino, N. Tsoupas, and J. Tuozzolo, “Building a Family of Corrector Magnets for SNS Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB046, pp. 2138-2140.
- K. L. Mahoney and H. P. Robertson, “Jefferson Lab IEC 61508/61511 Safety PLC Based Safety System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC002, pp. 394-396.
- A. A. Arzumanov, V. N. Batischev, V. I. Gerasimov, M. S. Gorkovets, and A. M. Voronin, “Alteration of the Ion Beam Emittance on the First Orbits in the Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-25, pp. 469-471.
- V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 529-532.
- A. T. Wu, H. Baumgart, and D. Gu, “TEM Study of Niobium Surfaces Treated by Different Polishing Techniques”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO041, pp. 300-304.
- J. A. Uythoven, E. H. R. Gaxiola, and M. A. Timmins, “Upgrade of the SPS Extraction Kickers for LHC and CNGS Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE084, pp. 2517-2519.
- M. Lokaichik et al., “Dedicated Proton Accelerator Complex for a Comprehensive Oncology Centre”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B03, pp. 2536-2538.
- G. Gatti, P. Miglietta, A. Perrone, C. Ristoscu, F. Tazzioli, and L. Cultrera, “UV Performances of Pulsed Laser Deposition Grown Mg Photocathodes”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH017, pp. 366-369.
- D. W. Feldman et al., “The Los Alamos Free- Electron Laser Energy-Recovery Experiment”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 221-224.
- N. Sei et al., “Coherent Edge Radiation Sources in Linac-Based Infrared Free-Electron Laser Facilities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 154-156.
- J. Lim et al., “An Adjustable Permanent Magnet Quadrupole Final Focus System for Low Energy Experiments”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB067, pp. 2192-2194.
- E. Al-Dmour and D. Einfeld, “The ALBA Vacuum System: Installation and Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA083, pp. 3861-3863.
Back to search