Favourites
For Word
[n] M. Streichert et al., “Simulations of Fringe Fields and Multipoles for the ANKA Storage Ring Bending Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP011, pp. 1626-1628.
[n] P. Kowina et al., “Pre-amplifier Impedance Matching for Cryogenic BPMs”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD20, pp. 347-349.
[n] R. D. Ruth, “Status and Results from the Next Linear Collider Test Accelerator”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP01, pp. 641-643.
[n] K. L. F. Bane, G. V. Stupakov, and J. Tu, “Reflectivity Measurements for Copper and Aluminum in the Far Infrared and the Resistive Wall Impedance in the LCLS Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH073, pp. 2955-2957.
[n] X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Robust 6D Muon Cooling in Four-sided Ring Cooler using Solenoids and Dipoles for a Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP055, pp. 205-207.
[n] M. Kalliokoski, “Simulations of Effects of Detector Materials and Geometry to the Beam Properties of Super-FRS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC067, pp. 1153-1155.
[n] X. Pei et al., “Low Frequency RF System for the Indiana University Cooler Ring”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-05, pp. 523-525.
[n] T. Yanagisawa, H. Hara, F. Inoue, K. Kanaoka, and K. Sennyu, “Status of the Superconducting Cavity Development for ILC”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP055, pp. 247-249.
[n] M. Sapinski, “About the damage mechanisms of thin targets exposed to high-power particle beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4824-4827. doi:10.18429/JACoW-IPAC2023-THPL151
[n] F. X. Kaertner, “Integrated Photonics to the Rescue of Femtosecond Beam Diagnostics”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 129-135. doi:10.18429/JACoW-IBIC2017-TU2AB1
[n] W. A. Barth et al., “High Current Proton Beam Operation at GSI UNILAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP056, pp. 550-552.
[n] P. Zhang, R. P. Johnson, M. Kuchnir, D. Siergiej, and D. Wolff, “Common Mode Noise on the Main Tevatron Bus and Associated Beam Emittance Growth”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 93-96.
[n] T. Takayanagi, K. Horino, and T. Ueno, “Development of a New Modular Switch Using a Next-Generation Semiconductor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3841-3844. doi:10.18429/JACoW-IPAC2018-THPAL082
[n] L. Hagge et al., “Parts Tracking for Fabrication, Installation and Maintenance at the European XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 719-721. doi:10.18429/JACoW-IPAC2016-MOPOW007
[n] B. Barquest et al., “Development and Installation of the CANREB RFQ Buncher at TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3914-3916. doi:10.18429/JACoW-IPAC2018-THPAL116
[n] J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
[n] L. S. Nadolski, “Methods and Tools to Simulate and Analyse Non-linear Dynamics in Electron Storage Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUXB01, pp. 937-941.
[n] J. Pfingstner, A. Latina, and D. Schulte, “Imperfection Tolerances for On-line Dispersion Free Steering in the Main Linac of CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME048, pp. 1673-1675.
[n] X. Shi, Y. Wang, H. Xu, D. Li, and A. Ma, “Design of a beam transport line for external injection of plasma wakefield acceleration experiments based on BEPCII”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB020, unpublished.
[n] A. V. Aleksandrov, W. Blokland, Y. Liu, C. D. Long, and A. P. Zhukov, “Diagnostics Tools for Beam Halo Investigation in SNS Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB013, pp. 873-875.
[n] G. v and R. Mueller, “The Concept of Modernizing the BESSY Control System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 872-875.
[n] P. S. Lakshmy, “Studies on electron energy distributions in High Temperature Superconducting ECR Ion Source, PKDELIS at IUAC”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper THT6AUCO18, unpublished.
[n] C. Zannini, G. Iadarola, K. S. B. Li, T. L. Rijoff, G. Rumolo, and B. Jones, “Transverse Impedance Model of the CERN-PSB”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 406-408. doi:10.18429/JACoW-IPAC2015-MOPJE050
[n] S. H. Kim, Z. A. Conway, M. P. Kelly, P. N. Ostroumov, and E. Burkhardt, “Measurement of a Superconducting Solenoid with Applications to Low-beta SRF Cryomodules”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC05, pp. 796-798.
[n] Z. Mart?¡, G. Benedetti, and U. Iriso, “Fast Quadrupole Beam Based Alignment Using AC Corrector Excitations”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1727-1730. doi:10.18429/JACoW-IPAC2018-TUPML078
[n] R. Kersevan and J. Miertusova, “Comparison of ESRF and Elettra Vacuum Evolution, Troubleshooting and Success”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH039, pp. 2174-2176.
[n] H. V. Smith, D. J. Adams, B. Jones, C. M. Warsop, Y. Irie, and Y. Takeda, “Simulation of Double Layer Carbon Stripping Foils for ISIS Injection Upgrades”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD064, pp. 514-516.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Streichert et al., “Simulations of Fringe Fields and Multipoles for the ANKA Storage Ring Bending Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP011, pp. 1626-1628.
- P. Kowina et al., “Pre-amplifier Impedance Matching for Cryogenic BPMs”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD20, pp. 347-349.
- R. D. Ruth, “Status and Results from the Next Linear Collider Test Accelerator”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP01, pp. 641-643.
- K. L. F. Bane, G. V. Stupakov, and J. Tu, “Reflectivity Measurements for Copper and Aluminum in the Far Infrared and the Resistive Wall Impedance in the LCLS Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH073, pp. 2955-2957.
- X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Robust 6D Muon Cooling in Four-sided Ring Cooler using Solenoids and Dipoles for a Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP055, pp. 205-207.
- M. Kalliokoski, “Simulations of Effects of Detector Materials and Geometry to the Beam Properties of Super-FRS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC067, pp. 1153-1155.
- X. Pei et al., “Low Frequency RF System for the Indiana University Cooler Ring”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-05, pp. 523-525.
- T. Yanagisawa, H. Hara, F. Inoue, K. Kanaoka, and K. Sennyu, “Status of the Superconducting Cavity Development for ILC”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP055, pp. 247-249.
- M. Sapinski, “About the damage mechanisms of thin targets exposed to high-power particle beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL151, pp. 4824-4827.
- F. X. Kaertner, “Integrated Photonics to the Rescue of Femtosecond Beam Diagnostics”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 129-135.
- W. A. Barth et al., “High Current Proton Beam Operation at GSI UNILAC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP056, pp. 550-552.
- P. Zhang, R. P. Johnson, M. Kuchnir, D. Siergiej, and D. Wolff, “Common Mode Noise on the Main Tevatron Bus and Associated Beam Emittance Growth”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 93-96.
- T. Takayanagi, K. Horino, and T. Ueno, “Development of a New Modular Switch Using a Next-Generation Semiconductor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3841-3844.
- L. Hagge et al., “Parts Tracking for Fabrication, Installation and Maintenance at the European XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 719-721.
- B. Barquest et al., “Development and Installation of the CANREB RFQ Buncher at TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3914-3916.
- J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
- L. S. Nadolski, “Methods and Tools to Simulate and Analyse Non-linear Dynamics in Electron Storage Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUXB01, pp. 937-941.
- J. Pfingstner, A. Latina, and D. Schulte, “Imperfection Tolerances for On-line Dispersion Free Steering in the Main Linac of CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME048, pp. 1673-1675.
- X. Shi, Y. Wang, H. Xu, D. Li, and A. Ma, “Design of a beam transport line for external injection of plasma wakefield acceleration experiments based on BEPCII”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB020, unpublished.
- A. V. Aleksandrov, W. Blokland, Y. Liu, C. D. Long, and A. P. Zhukov, “Diagnostics Tools for Beam Halo Investigation in SNS Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB013, pp. 873-875.
- G. v and R. Mueller, “The Concept of Modernizing the BESSY Control System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 872-875.
- P. S. Lakshmy, “Studies on electron energy distributions in High Temperature Superconducting ECR Ion Source, PKDELIS at IUAC”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper THT6AUCO18, unpublished.
- C. Zannini, G. Iadarola, K. S. B. Li, T. L. Rijoff, G. Rumolo, and B. Jones, “Transverse Impedance Model of the CERN-PSB”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 406-408.
- S. H. Kim, Z. A. Conway, M. P. Kelly, P. N. Ostroumov, and E. Burkhardt, “Measurement of a Superconducting Solenoid with Applications to Low-beta SRF Cryomodules”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC05, pp. 796-798.
- Z. Mart?¡, G. Benedetti, and U. Iriso, “Fast Quadrupole Beam Based Alignment Using AC Corrector Excitations”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1727-1730.
- R. Kersevan and J. Miertusova, “Comparison of ESRF and Elettra Vacuum Evolution, Troubleshooting and Success”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH039, pp. 2174-2176.
- H. V. Smith, D. J. Adams, B. Jones, C. M. Warsop, Y. Irie, and Y. Takeda, “Simulation of Double Layer Carbon Stripping Foils for ISIS Injection Upgrades”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD064, pp. 514-516.
Back to search