Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. F. White, S. T. Craig, V. A. Mason, S. M. Morsink, and D. L. Smyth, “Controlled Magnet Excitation for Electron Beam Scanning in Industrial Irradiators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1855-1858.
[n] B. Rusnak et al., “Evaluation of RF Seals for Resonant Cavity Applications”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO431, pp. 129-131.
[n] W. Ma et al., “The Superconducting Radio Frequency System of Shenzhen Industrial Synchrotron Radiation Source FacilityRIAL SYNCHROTRON RADIATION SOURCE FACILITY”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 392. doi:10.18429/JACoW-SRF2021-TUPFAV006
[n] D. C. Carey, “Third Order Combined Function Bending Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1289-1292.
[n] N. C. E. Crosland et al., “Recent Developments in HELIOS Compact Synchrotrons”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUOB01A, pp. 259-261.
[n] P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
[n] L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956.
[n] D. Sigg, “The LIGO Detectors Controls”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAB04, pp. 68-70.
[n] W. Diamond, R. C. Cohen, and D. W. Storm, “A Pulsed Synchrocyclotron Ion Source Using a Single Cold Cathode”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-12, pp. 2171-2174.
[n] I. H. Yu et al., “The Digital Feedback RF Control System of the RFQ and DTL1 for 100 MeV Proton Linac of PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT015, pp. 1443-1445.
[n] D. Lipka, J. Lund-Nielsen, and M. Seebach, “Resonator for Charge Measurement at REGAE”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF25, pp. 872-875.
[n] R. Pana and A. Curcio, “Coherent Difraction Radiation for Longitudinal Electron Beam Characteristics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 291-293. doi:10.18429/JACoW-IBIC2022-TUP28
[n] Z. X. Shao, H. Gao, G. Liu, P. Liu, X. K. Sun, and H. Y. Zhang, “Research and Design of Digital Magnet Power Supply Controller”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1297-1299. doi:10.18429/JACoW-IPAC2019-TUPMP027
[n] A. D. Casey et al., “Strategies for Migrating to a New Experiment Setup Tool at the National Ignition Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 311-314. doi:10.18429/JACoW-ICALEPCS2017-TUMPL05
[n] E. Huenges, H. Morinaga, and H. Muthig, “Performance of the Munich Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-04, pp. 111-112.
[n] R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401.
[n] C. R. Ader, R. E. Reilly, and J. H. Wilson, “Mechanical Design of Ceramic Beam Tube Braze Joints for NOvA Kicker Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC043, pp. 4155-4157.
[n] Y. G. Wang et al., “Establishing a Laser Treatment to Suppress the Secondary Electron Emission”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1303-1305. doi:10.18429/JACoW-IPAC2019-TUPMP029
[n] E. J. Montgomery et al., “Towards Ultra-Smooth Alkali Antimonide Photocathode Epitaxy”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3001-3004. doi:10.18429/JACoW-IPAC2021-WEPAB169
[n] V. N. Boriskin et al., “Magnetic Induction Monitor Measurements of Beam Spatial Characteristics in Technological Electron Linear Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH050, pp. 1336-1338.
[n] I. H. Yu, Y.-S. Cho, D. T. Kim, S.-C. Kim, I.-S. Park, and S. J. Park, “Prototype Digital Beam Position and Phase Monitor for the 100-MeV Proton Linac of PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT008, pp. 1120-1122.
[n] J. C. King, J. R. Harper, A. J. Long, T. L?Âhnert, and D. E. Oram, “The IBEX Script Generator”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 519-523. doi:10.18429/JACoW-ICALEPCS2021-TUPV049
[n] M. J. Shaw, R. A. Sacks, C. A. Haynam, and W. H. Williams, “Computational Modeling in Support of National Ignition Facility Operations”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP063, pp. XX-XX.
[n] D. W. Storm, “Invited Paper: A Survey of Synchrocyclotron Projects”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-04, pp. 1970-1975.
[n] A. A. Asseev, M. D. Bavizhev, E. A. Ludmirsky, V. A. Maisheev, and E. A. Myae, “The Main Results of Four Years Experience on Extracton of Protons by Bent Crystal from the 70 GeV IHEP Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2388-2391.
[n] V. M. Biryukov et al., “Experimental Study of Beam Collimation in Low Energy Proton Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6A04, pp. 1474-1476.
[n] C. B. Lawrence, S. T. Craig, J.-P. Labrie, S. Lord, and B. F. White, “The IMPELA Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1237-1240.
[n] V. A. Kushnir et al., “High Power Electron S-band Linac for Industrial Purposes”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB070, pp. 2878-2880.
[n] R. Kratz, G. Hinderer, J. Junger, J. Labedzki, and U. Trinks, “The Superconducting Tritron Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2254-2257.
[n] N. Yuan, L. Lu, W. Ma, L. Yang, Z. Zhang, and G. M. Liu, “Design of Third-Harmonic Superconducting Cavity for Shen-Zhen Industry Synchrotyon Radiation Source7”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 32. doi:10.18429/JACoW-SRF2021-SUPCAV010
[n] A. M. Marendziak, S. Piela, M. J. Stankiewicz, A. I. Wawrzyniak, M. Zajac, and E. Al-Dmour, “Residual Gas in the Vacuum System of the Solaris 1.5GeV Electron Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2734-2737. doi:10.18429/JACoW-IPAC2017-WEPAB068
[n] M. N. Wilson, “Technology Transfer on the Helios Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 347-350.
[n] E. P. Chamberlin, J. L. McKibben, and R. R. Stevens, “The LAMPF Polarized Ion Facility: Status Report”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1524-1527.
[n] E. Esarey, J. Krall, and G. Joyce, “Numerical Simulations of Driving Beam Dynamics in the Plasma Wakefield Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2626-2629.
[n] T. Dickinson and R. H. Rheaume, “RF Power Systems for the National Synchrotron Light Source”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2997-3000.
[n] A. Leggieri et al., “Radiation Measurements of a Medical Particle Accelerator Through a Passive Resonant Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 917-920. doi:10.18429/JACoW-IPAC2015-MOPHA053
[n] R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837.
[n] L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5056-5058. doi:10.18429/JACoW-IPAC2023-THPM070
[n] R. Beauregard, “Overview of Current and Future Platforms for Big Experiments/Different Types of Machines”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper WE2T01, unpublished.
[n] W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1573-1576.
[n] D. Janssen and V. N. Volkov, “RF Focussing - an Instrument for Beam Quality Improvement in Superconducting RF Guns”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7A08, pp. 2055-2057.
[n] J. H. Jeon, B. H. Chung, K.-H. Chung, J. S. Hong, S. K. Ko, and S. J. Noh, “High Power Modulator For Klystron of Proton Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA035, pp. XX-XX.
[n] A. Jakos, R. Modic, and R. Stefanic, “PulseOne, first FLASH-ready LINAC timing/trigger system”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS78, unpublished.
[n] J. Chavanne, C. Penel, B. Plan, and F. Revol, “In-Vacuum Undulators at ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA013, pp. 253-255.
[n] D. C. Carey, “Violation of Midplane Symmetry in Bending Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2255-2258.
[n] B. H. Chung, K.-H. Chung, J. S. Hong, J. H. Jeon, S. K. Ko, and S. J. Noh, “Test of 700MHz, 1MW Proto-type Klystron for PEFP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN053, pp. 2158-2160.
[n] C. N. Barbier, “Status and Future Directions for High Power Neutron Production Targets”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEZBA1, unpublished.
[n] D. R. Shoffstall and W. J. Gallagher, “On the Relative Merits of Travelling-Wave and Resonant Operation of Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3169-3172.
[n] H. D. Sanders and S. C. Glidden, “Compact, High Current, High Voltage Solid State Switches for Accelerator Applications”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD079, pp. 3701-3703.
[n] M. M. Holland and J. Shill, “Radiation Resistant Magnet Coils from Hard Anodized Aluminum Conductor”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 708-713.
[n] E. Pedroni et al., “A Novel Gantry for Proton Therapy at the Paul Scherrer Institute”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper H-3, pp. XX-XX.
[n] P. Emma, L. D. Bentson, R. A. Erickson, H. Fieguth, J. Seeman, and A. Seryi, “Proposal for a Multi-Use Test Beam Area in the SLAC B-Line”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP032, pp. 2221-2223.
[n] L. G. Sukhikh, G. Kube, A. Potylitsyn, and V. Schlott, “Coherent Resonant Diffraction Radiation from Inclined Grating as a Tool for Bunch Length Diagnostics”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD33, pp. 377-379.
[n] L. M. Sevryukova, A. M. Korotkov, and S. M. Pesterev, “Feasibilities of the Methods of Anode Oxipolishing and Anodization in the Technology of Superconducting Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I28, pp. XX-XX.
[n] E. Nolte et al., “The Munich Heavy Ion Postaccelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3724-3727.
[n] R. Karban, L. Andolfato, and M. Zamparelli, “Towards Model Re-usability for the Development of Telescope Control Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC006, pp. 25-27.
[n] B. Schofield, E. Blanco Vi??uela, J. H. P. D, and C. Borrego, “Continuous Integration for PLC-based Control System Development”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 478-483. doi:10.18429/JACoW-ICALEPCS2021-TUPV035
[n] P. Fernandez Carmona, M. Eichin, M. Grossmann, E. Johansen, A. Mayor, and H. A. Regele, “Reusable Patient Safety System Framework for the Proton Therapy Centre at PSI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 549-553. doi:10.18429/JACoW-ICALEPCS2015-TUC3O04
[n] V. N. Volkov, D. Janssen, and R. Wuensch, “Generation of Sub-Picosecond Electron Bunches from Superconducting 5.3 Cell RF Gun and Coherent Wiggler Radiation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH056, pp. 2218-2220.
[n] D. S. G. Higgins, M. J. Collier, C. L. Dawson, and P. A. McIntosh, “An Engineering Analysis of a New Perturbation Measurement Test Rig”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1998-2001.
[n] P. Medve?ícek, S. Artinian, J. F. Bergoz, and M. Kobal, “MicroIOC LR-BPM - Beam Position Monitor Solution”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP016, pp. 204-206.
[n] D. C. Carey, “Minimization of Aberrations in Beam Line Design”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 493-496.
[n] A. Potylitsyn and L. G. Sukhikh, “Transition Radiation from a Cylindrical Target and Transverse Beam Size Diagnostics”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD48, pp. 410-412.
[n] S. H. Park et al., “Status of RF Driver and Phasing System for PLS 2.0 GeV Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D020, pp. 127-129.
[n] P. Schnizer et al., “Advanced Multipoles and Appropriated Measurement Tools for Field Characterization of SIS100 Magnets”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2805-2808. doi:10.18429/JACoW-IPAC2015-WEPMA023
[n] P. Kneisel, J. Halbritter, and O. Stoltz, “Investigations of a Superconducting Beam Tube Niobium Cavity at S-Band”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 63-68.
[n] M. A. Plum et al., “Performance of and Upgrades to the SNS Collimator Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP027, pp. 2847-2849.
[n] O. Matveeva, S. Pesterev, L. Sevryukova, and D. Filippov, “The Influence of Specially Created Oxide Films on the Emission Properties of Niobium”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C30, pp. 675-684.
[n] L. Denis, C. Geuzaine, B. Vanderheyden, W. Kleeven, V. Nuttens, and P. Velten, “Finite element study of AC losses in the superconducting coil of the NHa C400 cyclotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5103-5106. doi:10.18429/JACoW-IPAC2023-THPM095
[n] M. Afkhami Karaei, H. Afarideh, S. Azizpourian, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Investigation of Central Region Design of 10MeV AVF Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1253-1255. doi:10.18429/JACoW-IPAC2016-TUPMR012
For LaTeX
Use Complete Form
For BibTeX
References
- B. F. White, S. T. Craig, V. A. Mason, S. M. Morsink, and D. L. Smyth, “Controlled Magnet Excitation for Electron Beam Scanning in Industrial Irradiators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1855-1858.
- B. Rusnak et al., “Evaluation of RF Seals for Resonant Cavity Applications”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO431, pp. 129-131.
- W. Ma et al., “The Superconducting Radio Frequency System of Shenzhen Industrial Synchrotron Radiation Source FacilityRIAL SYNCHROTRON RADIATION SOURCE FACILITY”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 392.
- D. C. Carey, “Third Order Combined Function Bending Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1289-1292.
- N. C. E. Crosland et al., “Recent Developments in HELIOS Compact Synchrotrons”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUOB01A, pp. 259-261.
- P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
- L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956.
- D. Sigg, “The LIGO Detectors Controls”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAB04, pp. 68-70.
- W. Diamond, R. C. Cohen, and D. W. Storm, “A Pulsed Synchrocyclotron Ion Source Using a Single Cold Cathode”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-12, pp. 2171-2174.
- I. H. Yu et al., “The Digital Feedback RF Control System of the RFQ and DTL1 for 100 MeV Proton Linac of PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT015, pp. 1443-1445.
- D. Lipka, J. Lund-Nielsen, and M. Seebach, “Resonator for Charge Measurement at REGAE”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF25, pp. 872-875.
- R. Pana and A. Curcio, “Coherent Difraction Radiation for Longitudinal Electron Beam Characteristics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 291-293.
- Z. X. Shao, H. Gao, G. Liu, P. Liu, X. K. Sun, and H. Y. Zhang, “Research and Design of Digital Magnet Power Supply Controller”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1297-1299.
- A. D. Casey et al., “Strategies for Migrating to a New Experiment Setup Tool at the National Ignition Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 311-314.
- E. Huenges, H. Morinaga, and H. Muthig, “Performance of the Munich Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-04, pp. 111-112.
- R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401.
- C. R. Ader, R. E. Reilly, and J. H. Wilson, “Mechanical Design of Ceramic Beam Tube Braze Joints for NOvA Kicker Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC043, pp. 4155-4157.
- Y. G. Wang et al., “Establishing a Laser Treatment to Suppress the Secondary Electron Emission”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1303-1305.
- E. J. Montgomery et al., “Towards Ultra-Smooth Alkali Antimonide Photocathode Epitaxy”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3001-3004.
- V. N. Boriskin et al., “Magnetic Induction Monitor Measurements of Beam Spatial Characteristics in Technological Electron Linear Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH050, pp. 1336-1338.
- I. H. Yu, Y.-S. Cho, D. T. Kim, S.-C. Kim, I.-S. Park, and S. J. Park, “Prototype Digital Beam Position and Phase Monitor for the 100-MeV Proton Linac of PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT008, pp. 1120-1122.
- J. C. King, J. R. Harper, A. J. Long, T. L?Âhnert, and D. E. Oram, “The IBEX Script Generator”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 519-523.
- M. J. Shaw, R. A. Sacks, C. A. Haynam, and W. H. Williams, “Computational Modeling in Support of National Ignition Facility Operations”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP063, pp. XX-XX.
- D. W. Storm, “Invited Paper: A Survey of Synchrocyclotron Projects”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-04, pp. 1970-1975.
- A. A. Asseev, M. D. Bavizhev, E. A. Ludmirsky, V. A. Maisheev, and E. A. Myae, “The Main Results of Four Years Experience on Extracton of Protons by Bent Crystal from the 70 GeV IHEP Accelerator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2388-2391.
- V. M. Biryukov et al., “Experimental Study of Beam Collimation in Low Energy Proton Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6A04, pp. 1474-1476.
- C. B. Lawrence, S. T. Craig, J.-P. Labrie, S. Lord, and B. F. White, “The IMPELA Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1237-1240.
- V. A. Kushnir et al., “High Power Electron S-band Linac for Industrial Purposes”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB070, pp. 2878-2880.
- R. Kratz, G. Hinderer, J. Junger, J. Labedzki, and U. Trinks, “The Superconducting Tritron Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2254-2257.
- N. Yuan, L. Lu, W. Ma, L. Yang, Z. Zhang, and G. M. Liu, “Design of Third-Harmonic Superconducting Cavity for Shen-Zhen Industry Synchrotyon Radiation Source7”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 32.
- A. M. Marendziak, S. Piela, M. J. Stankiewicz, A. I. Wawrzyniak, M. Zajac, and E. Al-Dmour, “Residual Gas in the Vacuum System of the Solaris 1.5GeV Electron Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2734-2737.
- M. N. Wilson, “Technology Transfer on the Helios Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 347-350.
- E. P. Chamberlin, J. L. McKibben, and R. R. Stevens, “The LAMPF Polarized Ion Facility: Status Report”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1524-1527.
- E. Esarey, J. Krall, and G. Joyce, “Numerical Simulations of Driving Beam Dynamics in the Plasma Wakefield Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2626-2629.
- T. Dickinson and R. H. Rheaume, “RF Power Systems for the National Synchrotron Light Source”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2997-3000.
- A. Leggieri et al., “Radiation Measurements of a Medical Particle Accelerator Through a Passive Resonant Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 917-920.
- R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837.
- L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM070, pp. 5056-5058.
- R. Beauregard, “Overview of Current and Future Platforms for Big Experiments/Different Types of Machines”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WE2T01, unpublished.
- W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1573-1576.
- D. Janssen and V. N. Volkov, “RF Focussing - an Instrument for Beam Quality Improvement in Superconducting RF Guns”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7A08, pp. 2055-2057.
- J. H. Jeon, B. H. Chung, K.-H. Chung, J. S. Hong, S. K. Ko, and S. J. Noh, “High Power Modulator For Klystron of Proton Accelerator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA035, pp. XX-XX.
- A. Jakos, R. Modic, and R. Stefanic, “PulseOne, first FLASH-ready LINAC timing/trigger system”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS78, unpublished.
- J. Chavanne, C. Penel, B. Plan, and F. Revol, “In-Vacuum Undulators at ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA013, pp. 253-255.
- D. C. Carey, “Violation of Midplane Symmetry in Bending Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2255-2258.
- B. H. Chung, K.-H. Chung, J. S. Hong, J. H. Jeon, S. K. Ko, and S. J. Noh, “Test of 700MHz, 1MW Proto-type Klystron for PEFP”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN053, pp. 2158-2160.
- C. N. Barbier, “Status and Future Directions for High Power Neutron Production Targets”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEZBA1, unpublished.
- D. R. Shoffstall and W. J. Gallagher, “On the Relative Merits of Travelling-Wave and Resonant Operation of Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3169-3172.
- H. D. Sanders and S. C. Glidden, “Compact, High Current, High Voltage Solid State Switches for Accelerator Applications”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD079, pp. 3701-3703.
- M. M. Holland and J. Shill, “Radiation Resistant Magnet Coils from Hard Anodized Aluminum Conductor”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 708-713.
- E. Pedroni et al., “A Novel Gantry for Proton Therapy at the Paul Scherrer Institute”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper H-3, pp. XX-XX.
- P. Emma, L. D. Bentson, R. A. Erickson, H. Fieguth, J. Seeman, and A. Seryi, “Proposal for a Multi-Use Test Beam Area in the SLAC B-Line”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP032, pp. 2221-2223.
- L. G. Sukhikh, G. Kube, A. Potylitsyn, and V. Schlott, “Coherent Resonant Diffraction Radiation from Inclined Grating as a Tool for Bunch Length Diagnostics”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD33, pp. 377-379.
- L. M. Sevryukova, A. M. Korotkov, and S. M. Pesterev, “Feasibilities of the Methods of Anode Oxipolishing and Anodization in the Technology of Superconducting Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I28, pp. XX-XX.
- E. Nolte et al., “The Munich Heavy Ion Postaccelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3724-3727.
- R. Karban, L. Andolfato, and M. Zamparelli, “Towards Model Re-usability for the Development of Telescope Control Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOC006, pp. 25-27.
- B. Schofield, E. Blanco Vi??uela, J. H. P. D, and C. Borrego, “Continuous Integration for PLC-based Control System Development”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 478-483.
- P. Fernandez Carmona, M. Eichin, M. Grossmann, E. Johansen, A. Mayor, and H. A. Regele, “Reusable Patient Safety System Framework for the Proton Therapy Centre at PSI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 549-553.
- V. N. Volkov, D. Janssen, and R. Wuensch, “Generation of Sub-Picosecond Electron Bunches from Superconducting 5.3 Cell RF Gun and Coherent Wiggler Radiation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH056, pp. 2218-2220.
- D. S. G. Higgins, M. J. Collier, C. L. Dawson, and P. A. McIntosh, “An Engineering Analysis of a New Perturbation Measurement Test Rig”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1998-2001.
- P. Medve?ícek, S. Artinian, J. F. Bergoz, and M. Kobal, “MicroIOC LR-BPM - Beam Position Monitor Solution”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP016, pp. 204-206.
- D. C. Carey, “Minimization of Aberrations in Beam Line Design”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 493-496.
- A. Potylitsyn and L. G. Sukhikh, “Transition Radiation from a Cylindrical Target and Transverse Beam Size Diagnostics”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD48, pp. 410-412.
- S. H. Park et al., “Status of RF Driver and Phasing System for PLS 2.0 GeV Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D020, pp. 127-129.
- P. Schnizer et al., “Advanced Multipoles and Appropriated Measurement Tools for Field Characterization of SIS100 Magnets”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2805-2808.
- P. Kneisel, J. Halbritter, and O. Stoltz, “Investigations of a Superconducting Beam Tube Niobium Cavity at S-Band”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 63-68.
- M. A. Plum et al., “Performance of and Upgrades to the SNS Collimator Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP027, pp. 2847-2849.
- O. Matveeva, S. Pesterev, L. Sevryukova, and D. Filippov, “The Influence of Specially Created Oxide Films on the Emission Properties of Niobium”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C30, pp. 675-684.
- L. Denis, C. Geuzaine, B. Vanderheyden, W. Kleeven, V. Nuttens, and P. Velten, “Finite element study of AC losses in the superconducting coil of the NHa C400 cyclotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM095, pp. 5103-5106.
- M. Afkhami Karaei, H. Afarideh, S. Azizpourian, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Investigation of Central Region Design of 10MeV AVF Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1253-1255.
Back to search