Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901.
[n] N. Fewell and R. Witkover, “Beam Diagnostics at the BNL 200 MeV Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C02, pp. 54-62.
[n] L. Eley et al., “Investigating X-ray detector systems using Monte Carlo techniques”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3617-3620. doi:10.18429/JACoW-IPAC2024-THPR47
[n] A. G. Valentinov et al., “New Superconducting Wigglers for KSRS”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 407-409. doi:10.18429/JACoW-RUPAC2018-THPSC04
[n] V. P. Suller, M. G. Fedurin, P. Jines, D. J. Launey, T. A. Miller, and Y. Wang, “Controlling the Vertical Emittance Coupling in CAMD”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS024, pp. 3329-3331.
[n] R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495.
[n] G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1422-1425.
[n] D. Kaltchev et al., “Studies of Transverse Single-pass Beam Breakup in E-Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS047, pp. 706-708.
[n] R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793.
[n] T. Nakanishi et al., “High Polarization and High Quantum Efficiency Cathode Research for Electron-Positron Linear Colliders (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-09, pp. 378-380.
[n] H. Kuhn, W. C. Middelkoop, and H. O, “The Design of the ISR Inflector”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 738-744.
[n] A. M. Batrakov et al., “HIGH MAGNETIC FIELD SUPERCONDUCTING MAGNETS FABRICATED IN BUDKER INP FOR SR GENERATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFI01, pp. XX-XX.
[n] L. Stingelin et al., “High Power RF Systems and Resonators for Sector Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CIO01, pp. 332-337.
[n] T. Hezel, R. Rossmanith, B. Krevet, and H. O. Moser, “Conceptual and Experimental Feasibility Study of a Superconductive Micro-Undulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P122, pp. 3512-3514.
[n] T. Hanley and S. Allison, “Can additive manufactured materials meet ISO cleanroom standards?”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM032, unpublished.
[n] Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288.
[n] H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901.
- N. Fewell and R. Witkover, “Beam Diagnostics at the BNL 200 MeV Linac”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper C02, pp. 54-62.
- L. Eley et al., “Investigating X-ray detector systems using Monte Carlo techniques”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR47, pp. 3617-3620.
- A. G. Valentinov et al., “New Superconducting Wigglers for KSRS”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 407-409.
- V. P. Suller, M. G. Fedurin, P. Jines, D. J. Launey, T. A. Miller, and Y. Wang, “Controlling the Vertical Emittance Coupling in CAMD”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS024, pp. 3329-3331.
- R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495.
- G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1422-1425.
- D. Kaltchev et al., “Studies of Transverse Single-pass Beam Breakup in E-Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS047, pp. 706-708.
- R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2790-2793.
- T. Nakanishi et al., “High Polarization and High Quantum Efficiency Cathode Research for Electron-Positron Linear Colliders (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-09, pp. 378-380.
- H. Kuhn, W. C. Middelkoop, and H. O, “The Design of the ISR Inflector”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 738-744.
- A. M. Batrakov et al., “HIGH MAGNETIC FIELD SUPERCONDUCTING MAGNETS FABRICATED IN BUDKER INP FOR SR GENERATION”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFI01, pp. XX-XX.
- L. Stingelin et al., “High Power RF Systems and Resonators for Sector Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper WEM2CIO01, pp. 332-337.
- T. Hezel, R. Rossmanith, B. Krevet, and H. O. Moser, “Conceptual and Experimental Feasibility Study of a Superconductive Micro-Undulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P122, pp. 3512-3514.
- T. Hanley and S. Allison, “Can additive manufactured materials meet ISO cleanroom standards?”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM032, unpublished.
- Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288.
- H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1845-1848.
Back to search