Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Fruneau, G. Campillo, B. Meillon, J. C. Ravel, M. Robin, and M. Tournier, “Beam Diagnostics and Control at SARA”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-03, pp. 589-591.
[n] L. M. Onischenko et al., “DEVELOPMENT OF COMPACT CYCLOTRON FOR EXPLOSIVES DETECTION BY NUCLEAR RESONANCE ABSORPTION OF GAMMA-RAYS IN NITROGEN”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO02, pp. XX-XX.
[n] J. L. Lemaire, A. Compant La Fontaine, A. Godefroy, D. Guilhem, P. Leclerc, and J. Y. Salmon, “A New Diagnostic for the Measurement of the Ionic Emission Generated by an Electron-Photon Conversion Target”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH087, pp. 1411-1413.
[n] A. Costa and E. Sciacca, “Monitoring, Logging and Alarm Systems for the Cherenkov Telescope Array: Architecture and Deployment”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THPV045, unpublished.
[n] X. Cao, “Analysis of Hydrogen Contamination of Superconducting Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F06, pp. XX-XX.
[n] J. F. Citadini, R. Basilio, M. Potye, and G. Tosin, “System for Local Magnetic Field Measurement System Based on a Coil with Three Square Millimeter”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC143, pp. 2344-2346.
[n] X. Yi, L. W. Lai, Y. B. Leng, Y. B. Yan, N. Zhang, and Z. C. Chen, “A Calibration Method for the RF Front-end Asymmetry of the DBPM Processor”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD10, pp. 56-58.
[n] G. Hahn, B. J. Kim, D. E. Kim, J. Lee, S.-H. Kim, and Y. Jung, “Injection magnet system for Korea-4GSR facility”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1540-1543. doi:10.18429/JACoW-IPAC2024-TUPR52
[n] P. Michelato, A. Giussani, and C. Pagani, “Operational Experience and Tests of the Milan K800 Cyclotron Vacuum System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1278-1281.
[n] R. Kuroda et al., “Characterization of Electron Beam from a Mg Photo-cathode RF Gun System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI074, pp. 1783-1785.
[n] R. M. Hutcheon, L. D. Hansborough, K. J. Hohban, and S. O. Schriber, “RFQ Linac Structure Developments at CRNL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3521-3524.
[n] J. E. Spencer and H. A. Thiessen, “Some High Resolution Techniques for Use with Negative Ion Beams”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P21, pp. 415-421.
[n] O. Tcherbakoff et al., “Seeding SPARC Facility with Harmonic Generation in Gases: Preliminary Tests of the Harmonic Generation in Gas Chamber”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH003, pp. 47-49.
[n] S. Shchelkunov, S. Kazakov, V. Yakovlev, A. Kanareykin, E. Nenasheva, and J. Hirshfield, “Fast Ferroelectric Phase Shifter Design for ERLs”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG317, pp. 67-71.
[n] Z. Jiang et al., “Design and status of SHINE injector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 164-166. doi:10.18429/JACoW-IPAC2024-MOPC47
[n] W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEOGC3, unpublished.
[n] P. Heikkinen et al., “Feasibility Studies of the H- Acceleration in the K130 Cyclotron in Jyv?ñskyl?ñ”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-16, pp. 650-653.
[n] P. Golonka and F. Varela, “Consolidation and Redesign of CERN Industrial Controls Frameworks”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 962. doi:10.18429/JACoW-ICALEPCS2019-WEDPL04
[n] H. S. Vora et al., “Master Slave Topology Based, Remotely Operated, Precision X-ray Beam Profiler and Placement System for High Pressure Physics Experiment at Indus-2 Beam Line”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD04, pp. 128-130.
[n] G. G. Gulbekyan et al., “New Development at the JINR Heavy Ion Cyclotron Facility (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-02, pp. 11-21.
[n] S. Atieh et al., “First Results of SRF Cavity Fabrication by Electro-Hydraulic Forming at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA05, pp. 1012-1018.
[n] A. J. Dick, J. D. Jarvis, and P. Piot, “Characterization and Simulation of Optical Delay System for the Proof-of-Principle Experiment of Optical Stochastic Cooling at IOTA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3269-3272. doi:10.18429/JACoW-IPAC2021-WEPAB270
[n] F. Zhou et al., “Emittance Growth due to the Laser Non-uniformity in a Photoinjector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUAGB003, pp. 275-277.
[n] P. Emma, J. Wu, R. A. Bosch, and K. J. Kleman, “Design and Optimization of Electron Bunch Acceleration and Compression”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP050, pp. 512-514.
[n] A. Valishev, V. S. Kashikhin, S. Nagaitsev, and V. V. Danilov, “Ring for Test of Nonlinear Integrable Optics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP070, pp. 1606-1608.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Fruneau, G. Campillo, B. Meillon, J. C. Ravel, M. Robin, and M. Tournier, “Beam Diagnostics and Control at SARA”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-03, pp. 589-591.
- L. M. Onischenko et al., “DEVELOPMENT OF COMPACT CYCLOTRON FOR EXPLOSIVES DETECTION BY NUCLEAR RESONANCE ABSORPTION OF GAMMA-RAYS IN NITROGEN”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO02, pp. XX-XX.
- J. L. Lemaire, A. Compant La Fontaine, A. Godefroy, D. Guilhem, P. Leclerc, and J. Y. Salmon, “A New Diagnostic for the Measurement of the Ionic Emission Generated by an Electron-Photon Conversion Target”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH087, pp. 1411-1413.
- A. Costa and E. Sciacca, “Monitoring, Logging and Alarm Systems for the Cherenkov Telescope Array: Architecture and Deployment”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper THPV045, unpublished.
- X. Cao, “Analysis of Hydrogen Contamination of Superconducting Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F06, pp. XX-XX.
- J. F. Citadini, R. Basilio, M. Potye, and G. Tosin, “System for Local Magnetic Field Measurement System Based on a Coil with Three Square Millimeter”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC143, pp. 2344-2346.
- X. Yi, L. W. Lai, Y. B. Leng, Y. B. Yan, N. Zhang, and Z. C. Chen, “A Calibration Method for the RF Front-end Asymmetry of the DBPM Processor”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD10, pp. 56-58.
- G. Hahn, B. J. Kim, D. E. Kim, J. Lee, S.-H. Kim, and Y. Jung, “Injection magnet system for Korea-4GSR facility”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR52, pp. 1540-1543.
- P. Michelato, A. Giussani, and C. Pagani, “Operational Experience and Tests of the Milan K800 Cyclotron Vacuum System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1278-1281.
- R. Kuroda et al., “Characterization of Electron Beam from a Mg Photo-cathode RF Gun System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI074, pp. 1783-1785.
- R. M. Hutcheon, L. D. Hansborough, K. J. Hohban, and S. O. Schriber, “RFQ Linac Structure Developments at CRNL”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3521-3524.
- J. E. Spencer and H. A. Thiessen, “Some High Resolution Techniques for Use with Negative Ion Beams”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P21, pp. 415-421.
- O. Tcherbakoff et al., “Seeding SPARC Facility with Harmonic Generation in Gases: Preliminary Tests of the Harmonic Generation in Gas Chamber”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH003, pp. 47-49.
- S. Shchelkunov, S. Kazakov, V. Yakovlev, A. Kanareykin, E. Nenasheva, and J. Hirshfield, “Fast Ferroelectric Phase Shifter Design for ERLs”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG317, pp. 67-71.
- Z. Jiang et al., “Design and status of SHINE injector”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC47, pp. 164-166.
- W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGC3, unpublished.
- P. Heikkinen et al., “Feasibility Studies of the H- Acceleration in the K130 Cyclotron in Jyv?ñskyl?ñ”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-16, pp. 650-653.
- P. Golonka and F. Varela, “Consolidation and Redesign of CERN Industrial Controls Frameworks”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 962.
- H. S. Vora et al., “Master Slave Topology Based, Remotely Operated, Precision X-ray Beam Profiler and Placement System for High Pressure Physics Experiment at Indus-2 Beam Line”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD04, pp. 128-130.
- G. G. Gulbekyan et al., “New Development at the JINR Heavy Ion Cyclotron Facility (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-02, pp. 11-21.
- S. Atieh et al., “First Results of SRF Cavity Fabrication by Electro-Hydraulic Forming at CERN”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THAA05, pp. 1012-1018.
- A. J. Dick, J. D. Jarvis, and P. Piot, “Characterization and Simulation of Optical Delay System for the Proof-of-Principle Experiment of Optical Stochastic Cooling at IOTA”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3269-3272.
- F. Zhou et al., “Emittance Growth due to the Laser Non-uniformity in a Photoinjector”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUAGB003, pp. 275-277.
- P. Emma, J. Wu, R. A. Bosch, and K. J. Kleman, “Design and Optimization of Electron Bunch Acceleration and Compression”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP050, pp. 512-514.
- A. Valishev, V. S. Kashikhin, S. Nagaitsev, and V. V. Danilov, “Ring for Test of Nonlinear Integrable Optics”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP070, pp. 1606-1608.
Back to search