Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Enegren, R. Burge, and D. A. Dohan, “A Modular RF Control System at TRIUMF”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 550-553.
[n] D. Horan and Y. Kang, “Design and Construction of a 1-MW, 352-MHz RF Test Load”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P036, pp. 3687-3689.
[n] M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 879-881. doi:10.18429/JACoW-LINAC2018-THPO084
[n] S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
[n] F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479.
[n] G. Decker et al., “Global DC Closed Orbit Correction Experiments on the NSLS X-Ray Ring and SPEAR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2275-2278.
[n] A. Loulergue et al., “Baseline Lattice for the Upgrade of SOLEIL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4726-4729. doi:10.18429/JACoW-IPAC2018-THPML034
[n] A. C. C. Villari et al., “PK-ISIS: a New Superconducting ECR Ion Source at Pantechnik”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK01, pp. 26-26.
[n] N. Inabe, “FIXED-FREQUENCY RING CYCLOTRON (fRC) IN RIBF”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P15, pp. XX-XX.
[n] T.-C. Yu et al., “Adaptive Control of Klystron Operation Parameters for Energy Saving at Storage Ring of TPS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3748-3751. doi:10.18429/JACoW-IPAC2021-THXC07
[n] F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
[n] A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 114-117. doi:10.18429/JACoW-MEDSI2018-TUPH34
[n] I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1869-1872. doi:10.18429/JACoW-ICALEPCS2017-THPHA184
[n] K. Zhao et al., “Laboratory Activities on RF Superconductvity at Peking University”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B06, pp. XX-XX.
[n] C. M. Bhat, “Measurements of Higher Order Modes in 3rd Harmonic RF Cavity at Fermilab”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 787-790.
[n] G. Morgan et al., “Superconducting Magnet System for the AGS High Energy Unseparated Beam”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1164-1168.
[n] M. L. Lopes, “SolCalc: A Suite for the Calculation and the Display of Magnetic Fields Generated by Solenoid Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 445-447. doi:10.18429/JACoW-IPAC2014-MOPME031
[n] L. T. Huang et al., “Test of the Tune Measurement System Based on BBQ at HLS-II Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4926-4928. doi:10.18429/JACoW-IPAC2018-THPML111
[n] C. M. Bhat and P. S. Martin, “Radiation Shielding of the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA12, pp. 2105-2107.
[n] R. D. Ryne, C. E. Mitchell, J. Qiang, B. E. Carlsten, and N. A. Yampolsky, “Large-scale Simulation of Synchrotron Radiation using a Lienard-Wiechert Approach”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP036, pp. 1689-1691.
[n] E. Gluskin et al., “The Ellipitical Multipole Wiggler Project”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ17, pp. 1426-1428.
[n] G. H. Morgan et al., “Construction and Results of the 50 mm Short R&D Dipole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2167-2170.
[n] T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3704-3707.
[n] S. S. Mohite, R. Hettinger, K. Knie, and I. J. Petzenhauser, “Development of 400 kA Pulsed Power Supply for Magnetic Horn at FAIR Antiproton Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 517-519. doi:10.18429/JACoW-IPAC2014-MOPME066
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] A. Stillman, “Laser Compton Polarimetry of Proton Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB15, pp. 2560-2562.
[n] A. Cabrespine, Y. Dupuis, and C. Bieth, “RF System of the Orsay Isochronous 80-Inch Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F03, pp. XX-XX.
[n] E. Trakhtenberg, B. Brajuskovic, P. Den Hartog, and G. Wiemerslage, “New Insertion Device Vacuum Chambers at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB003, pp. 830-832.
[n] I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593.
[n] Z. Zhang et al., “Tunable High-Intensity Electron Bunch Train Production Based on Nonlinear Longitudinal Space Charge Oscillation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1782-1784. doi:10.18429/JACoW-IPAC2016-TUPOW018
[n] T. Y. Zhou et al., “Design of Bunch Length Measurement System at the IRFEL Using a Martin-Puplett Interferometer”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 178-180. doi:10.18429/JACoW-IPAC2016-MOPMB039
[n] M. Hara et al., “Storage Ring Design of SPring-8, 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 466-469.
[n] K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
[n] T. F. Godlove et al., “Injector Design for a Model Electron Ring at the University of Maryland”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V038, pp. 1959-1961.
[n] S. Yu et al., “Heavy Ion Fusion 2 MV Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE01, pp. 1178-1182.
[n] R. E. Laxdal et al., “The Injector Cryomodule for e-Linac at TRIUMF”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOCS6, pp. 1469-1471.
[n] M. Reichanadter, C. M. Bhat, C. Crawford, and P. S. Martin, “A High Intensity Beam Absorber Corebox for the Fermilab Main Injector Abort System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P014, pp. 243-245.
[n] K. Sonnad et al., “Progress on Simulation of Beam Dynamics with Electron Cloud Effects: An update”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST05, pp. 100-102.
[n] Y. Ishi et al., “Practical Betatron Tune Behavior During Acceleration in Scaling FFAG Rings at KURNS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3287-3289. doi:10.18429/JACoW-IPAC2018-THPAK034
[n] C. K. Yang, C.-H. Chang, T. Y. Chung, J. C. Huang, C.-S. Hwang, and Y. Y. Lin, “Design of a System at NSRRC to Measure the Field for an In-vacuum Cryogenic Undulator with Permanent Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2041-2043. doi:10.18429/JACoW-IPAC2014-WEPRO045
[n] F. Willeke, “Dynamic Aperture, A Review of Theory and Experiment”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 219-224.
[n] M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
[n] O. Chimalpopoca et al., “Engineering and Fabrication of the High Gradient Structure for Compact Ion Therapy Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 267-269. doi:10.18429/JACoW-NAPAC2019-MOPLO15
[n] V. V. Vardanyan et al., “Distributed Cooling System for the AREAL Test Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4010-4012. doi:10.18429/JACoW-IPAC2014-THPRI100
[n] A. Fisher, P. Gilad, F. Goldin, and N. Rostoker, “Studies of an Unneutral Electron Cloud in the CFIA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3383-3386.
[n] I. J. Petzenhauser, U. Blell, and S. Heberer, “Injection and Extraction Systems of the SIS100 Heavy Ion Synchrotron at FAIR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3514-3516. doi:10.18429/JACoW-IPAC2021-WEPAB348
[n] R. Rujanakraikarn, “FPGA-Based Pulsed-RF Phase and Amplitude Detector at SLRI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 557-561. doi:10.18429/JACoW-ICALEPCS2017-TUPHA068
[n] C. M. Bhat, “Antiproton Stacking and Un-stacking in the Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE010, pp. 2345-2347.
[n] T. Sen, C. M. Bhat, and J.-F. Ostiguy, “Stability of Flat Bunches in the Recycler Barrier Bucket”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP061, pp. 4679-4681.
[n] R. H. Stokes, “Proposed Accelerator for Heavy Ions”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 159-163.
[n] M. A. Al-Najdawi, H. Al-Mohammad, E. Huttel, F. Makahleh, and M. M. Shehab, “Vacuum System of SESAME Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 71-73. doi:10.18429/JACoW-MEDSI2016-MOPE28
[n] R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 427-429. doi:10.18429/JACoW-MEDSI2018-THPH43
[n] V. G. Khachatryan, V. H. Petrosyan, A. Sargsyan, and A. V. Tsakanian, “Particle Tracking Simulations with FLUKA for DESY FLASH and EXFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 363-365. doi:10.18429/JACoW-IPAC2014-MOPRO114
[n] S. R. Koscielniak et al., “Accelerator Design for a 1/2 MW Electron Linac for Rare Isotope Beam Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP090, pp. 2728-2730.
[n] N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4368-4371. doi:10.18429/JACoW-IPAC2019-FRXXPLS1
[n] B. Yasatekin et al., “Commissioning of SANAEM RFQ Accelerator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 690-692. doi:10.18429/JACoW-IPAC2021-MOPAB209
[n] H. Henke, “Diffraction Radiation by a Charge Sheet Moving Past a Conducting Wedge”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 380-383.
[n] M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518.
[n] H. Henke, “Planar Structures for Electron Acceleration”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ14, pp. 1750-1752.
[n] C. M. Bhat, “Barrier RF Systems in Synchrotrons”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOBCH03, pp. 236-238.
[n] M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523.
[n] M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393.
[n] D. A. Finley, R. P. Johnson, and F. Willeke, “Control and Initial Operation of the Fermilab Bzero Low beta Insertion”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1678-1681.
[n] D. Kehne, L. K. Len, and F. Mako, “Studies of High-Voltage Breakdown Suppression Resulting from E-Beam Modification of Copper Surfaces”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH043, pp. 864-866.
[n] V. Gubaidulin, O. Boine-Frankenheim, and V. Kornilov, “Landau damping with a transversely gaussian pulsed electron lens”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2654-2656. doi:10.18429/JACoW-IPAC2023-WEPA005
[n] H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
[n] S. V. Kutsaev et al., “New Microwave Thermionic Electron Gun for APS Upgrade: Test Results and Operation Experience”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2665-2667. doi:10.18429/JACoW-IPAC2022-THPOPT036
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, H. A. Day, and F. Toral, “Transverse Impedance Measurements and DC Breakdown Tests on the First Stripline Kicker Prototype for the CLIC Damping Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3058-3061. doi:10.18429/JACoW-IPAC2015-WEPMN058
[n] S. V. Kutsaev, R. B. Agustsson, R. D. Berry, D. Chao, and Z. A. Conway, “Stand-alone Accelerator System Based on SRF Quarter-wave Resonators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2185-2188. doi:10.18429/JACoW-IPAC2019-TUPTS112
[n] C. M. Bhat and J. Marriner, “Gamma Ray Activation of the Fermilab Pbar Target”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 831-834.
[n] A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314.
[n] Y. Kang, M. Tiefenback, and P. Chevtsov, “Reactive RF Tuning for Compensation of A Detuned Accelerating Cavity”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH456, pp. 731-733.
[n] D. F. C. Fernandez-Carreiras et al., “Personnel Protection, Equipment Protection and Fast Interlock Systems: Three Different Technologies to Provide Protection at Three Different Levels”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU005, pp. 1055-1057.
[n] I. Degl'Innocenti, A. Boccardi, D. Bett, and M. Krupa, “HL-LHC BPM electronics development as a case study for direct digitization and integrated processing techniques in accelerator instrumentation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4657-4660. doi:10.18429/JACoW-IPAC2023-THPL089
[n] S. H. Be, Y. P. Lee, Y. Morimoto, Y. Oikawa, H. Sakamoto, and S. Yokouchi, “Vacuum System for the 9 GeV Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 577-580.
[n] P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. XX-XX. doi:10.18429/JACoW-ICALEPCS2019-WECPR04
[n] V. Gubaidulin, S. E. Feddaoui Dellalou, A. Gamelin, S. Habet, L. Nadolski, and R. Nagaoka, “Interaction of intrabeam scattering, longitudinal wakefield, and a passive harmonic RF cavity in SOLEIL II”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS009, unpublished.
[n] Y. Otake, S. Tokumoto, and H. Mizuno, “Design and High-Power Test of a TE11-Mode X-Band RF Window with Taper Transitions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ29, pp. 1590-1592.
[n] F. J. Decker, R. K. Jobe, N. Merminga, and K. A. Thompson, “Controlling Multi-Bunches by a Fast Phase Switching”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU423, pp. 364-366.
[n] B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
[n] Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864.
[n] M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Enegren, R. Burge, and D. A. Dohan, “A Modular RF Control System at TRIUMF”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 550-553.
- D. Horan and Y. Kang, “Design and Construction of a 1-MW, 352-MHz RF Test Load”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P036, pp. 3687-3689.
- M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 879-881.
- S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
- F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479.
- G. Decker et al., “Global DC Closed Orbit Correction Experiments on the NSLS X-Ray Ring and SPEAR”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2275-2278.
- A. Loulergue et al., “Baseline Lattice for the Upgrade of SOLEIL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4726-4729.
- A. C. C. Villari et al., “PK-ISIS: a New Superconducting ECR Ion Source at Pantechnik”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK01, pp. 26-26.
- N. Inabe, “FIXED-FREQUENCY RING CYCLOTRON (fRC) IN RIBF”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P15, pp. XX-XX.
- T.-C. Yu et al., “Adaptive Control of Klystron Operation Parameters for Energy Saving at Storage Ring of TPS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3748-3751.
- F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
- A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 114-117.
- I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1869-1872.
- K. Zhao et al., “Laboratory Activities on RF Superconductvity at Peking University”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B06, pp. XX-XX.
- C. M. Bhat, “Measurements of Higher Order Modes in 3rd Harmonic RF Cavity at Fermilab”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 787-790.
- G. Morgan et al., “Superconducting Magnet System for the AGS High Energy Unseparated Beam”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1164-1168.
- M. L. Lopes, “SolCalc: A Suite for the Calculation and the Display of Magnetic Fields Generated by Solenoid Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 445-447.
- L. T. Huang et al., “Test of the Tune Measurement System Based on BBQ at HLS-II Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4926-4928.
- C. M. Bhat and P. S. Martin, “Radiation Shielding of the Main Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA12, pp. 2105-2107.
- R. D. Ryne, C. E. Mitchell, J. Qiang, B. E. Carlsten, and N. A. Yampolsky, “Large-scale Simulation of Synchrotron Radiation using a Lienard-Wiechert Approach”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP036, pp. 1689-1691.
- E. Gluskin et al., “The Ellipitical Multipole Wiggler Project”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ17, pp. 1426-1428.
- G. H. Morgan et al., “Construction and Results of the 50 mm Short R&D Dipole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2167-2170.
- T. M. Taylor, “Technological Aspects of the LEP Low-Beta Insertions”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3704-3707.
- S. S. Mohite, R. Hettinger, K. Knie, and I. J. Petzenhauser, “Development of 400 kA Pulsed Power Supply for Magnetic Horn at FAIR Antiproton Target”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 517-519.
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- A. Stillman, “Laser Compton Polarimetry of Proton Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB15, pp. 2560-2562.
- A. Cabrespine, Y. Dupuis, and C. Bieth, “RF System of the Orsay Isochronous 80-Inch Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F03, pp. XX-XX.
- E. Trakhtenberg, B. Brajuskovic, P. Den Hartog, and G. Wiemerslage, “New Insertion Device Vacuum Chambers at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB003, pp. 830-832.
- I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593.
- Z. Zhang et al., “Tunable High-Intensity Electron Bunch Train Production Based on Nonlinear Longitudinal Space Charge Oscillation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1782-1784.
- T. Y. Zhou et al., “Design of Bunch Length Measurement System at the IRFEL Using a Martin-Puplett Interferometer”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 178-180.
- M. Hara et al., “Storage Ring Design of SPring-8, 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 466-469.
- K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
- T. F. Godlove et al., “Injector Design for a Model Electron Ring at the University of Maryland”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V038, pp. 1959-1961.
- S. Yu et al., “Heavy Ion Fusion 2 MV Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE01, pp. 1178-1182.
- R. E. Laxdal et al., “The Injector Cryomodule for e-Linac at TRIUMF”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOCS6, pp. 1469-1471.
- M. Reichanadter, C. M. Bhat, C. Crawford, and P. S. Martin, “A High Intensity Beam Absorber Corebox for the Fermilab Main Injector Abort System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P014, pp. 243-245.
- K. Sonnad et al., “Progress on Simulation of Beam Dynamics with Electron Cloud Effects: An update”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST05, pp. 100-102.
- Y. Ishi et al., “Practical Betatron Tune Behavior During Acceleration in Scaling FFAG Rings at KURNS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3287-3289.
- C. K. Yang, C.-H. Chang, T. Y. Chung, J. C. Huang, C.-S. Hwang, and Y. Y. Lin, “Design of a System at NSRRC to Measure the Field for an In-vacuum Cryogenic Undulator with Permanent Magnet”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2041-2043.
- F. Willeke, “Dynamic Aperture, A Review of Theory and Experiment”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 219-224.
- M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
- O. Chimalpopoca et al., “Engineering and Fabrication of the High Gradient Structure for Compact Ion Therapy Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 267-269.
- V. V. Vardanyan et al., “Distributed Cooling System for the AREAL Test Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4010-4012.
- A. Fisher, P. Gilad, F. Goldin, and N. Rostoker, “Studies of an Unneutral Electron Cloud in the CFIA”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3383-3386.
- I. J. Petzenhauser, U. Blell, and S. Heberer, “Injection and Extraction Systems of the SIS100 Heavy Ion Synchrotron at FAIR”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3514-3516.
- R. Rujanakraikarn, “FPGA-Based Pulsed-RF Phase and Amplitude Detector at SLRI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 557-561.
- C. M. Bhat, “Antiproton Stacking and Un-stacking in the Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE010, pp. 2345-2347.
- T. Sen, C. M. Bhat, and J.-F. Ostiguy, “Stability of Flat Bunches in the Recycler Barrier Bucket”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP061, pp. 4679-4681.
- R. H. Stokes, “Proposed Accelerator for Heavy Ions”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 159-163.
- M. A. Al-Najdawi, H. Al-Mohammad, E. Huttel, F. Makahleh, and M. M. Shehab, “Vacuum System of SESAME Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 71-73.
- R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 427-429.
- V. G. Khachatryan, V. H. Petrosyan, A. Sargsyan, and A. V. Tsakanian, “Particle Tracking Simulations with FLUKA for DESY FLASH and EXFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 363-365.
- S. R. Koscielniak et al., “Accelerator Design for a 1/2 MW Electron Linac for Rare Isotope Beam Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP090, pp. 2728-2730.
- N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4368-4371.
- B. Yasatekin et al., “Commissioning of SANAEM RFQ Accelerator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 690-692.
- H. Henke, “Diffraction Radiation by a Charge Sheet Moving Past a Conducting Wedge”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 380-383.
- M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2515-2518.
- H. Henke, “Planar Structures for Electron Acceleration”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ14, pp. 1750-1752.
- C. M. Bhat, “Barrier RF Systems in Synchrotrons”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOBCH03, pp. 236-238.
- M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2520-2523.
- M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393.
- D. A. Finley, R. P. Johnson, and F. Willeke, “Control and Initial Operation of the Fermilab Bzero Low beta Insertion”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1678-1681.
- D. Kehne, L. K. Len, and F. Mako, “Studies of High-Voltage Breakdown Suppression Resulting from E-Beam Modification of Copper Surfaces”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH043, pp. 864-866.
- V. Gubaidulin, O. Boine-Frankenheim, and V. Kornilov, “Landau damping with a transversely gaussian pulsed electron lens”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA005, pp. 2654-2656.
- H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
- S. V. Kutsaev et al., “New Microwave Thermionic Electron Gun for APS Upgrade: Test Results and Operation Experience”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2665-2667.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, H. A. Day, and F. Toral, “Transverse Impedance Measurements and DC Breakdown Tests on the First Stripline Kicker Prototype for the CLIC Damping Rings”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3058-3061.
- S. V. Kutsaev, R. B. Agustsson, R. D. Berry, D. Chao, and Z. A. Conway, “Stand-alone Accelerator System Based on SRF Quarter-wave Resonators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2185-2188.
- C. M. Bhat and J. Marriner, “Gamma Ray Activation of the Fermilab Pbar Target”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 831-834.
- A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314.
- Y. Kang, M. Tiefenback, and P. Chevtsov, “Reactive RF Tuning for Compensation of A Detuned Accelerating Cavity”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH456, pp. 731-733.
- D. F. C. Fernandez-Carreiras et al., “Personnel Protection, Equipment Protection and Fast Interlock Systems: Three Different Technologies to Provide Protection at Three Different Levels”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU005, pp. 1055-1057.
- I. Degl'Innocenti, A. Boccardi, D. Bett, and M. Krupa, “HL-LHC BPM electronics development as a case study for direct digitization and integrated processing techniques in accelerator instrumentation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL089, pp. 4657-4660.
- S. H. Be, Y. P. Lee, Y. Morimoto, Y. Oikawa, H. Sakamoto, and S. Yokouchi, “Vacuum System for the 9 GeV Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 577-580.
- P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. XX-XX.
- V. Gubaidulin, S. E. Feddaoui Dellalou, A. Gamelin, S. Habet, L. Nadolski, and R. Nagaoka, “Interaction of intrabeam scattering, longitudinal wakefield, and a passive harmonic RF cavity in SOLEIL II”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS009, this conference.
- Y. Otake, S. Tokumoto, and H. Mizuno, “Design and High-Power Test of a TE11-Mode X-Band RF Window with Taper Transitions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ29, pp. 1590-1592.
- F. J. Decker, R. K. Jobe, N. Merminga, and K. A. Thompson, “Controlling Multi-Bunches by a Fast Phase Switching”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU423, pp. 364-366.
- B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
- Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864.
- M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
Back to search