Favourites
For Word
[n] N. S. Joshi, G. Bollen, M. Brodeur, D. J. Morrissey, and S. Schwarz, “Status of NSCL Cyclotron Gas Stopper”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR087, pp. 2029-2031.
[n] Y. K. Batygin et al., “Particle-In-Cell Simulation of Electron-Helium Plasma in Cyclotron Gas Stopper”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC006, pp. 266-269.
[n] E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “MOPA FEL Scheme as a Source of Primary Photons for Gamma-Gamma Collider at TESLA and SBLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W001, pp. 575-577.
[n] T. G. Berenc and M. Borland, “Modeling RF Feedback in Elegant for Bunch-Lengthening Studies for the Advanced Photon Source Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 540-542. doi:10.18429/JACoW-IPAC2015-MOPMA006
[n] A. Saini, A. Shemyakin, B. Hanna, J.-P. Carneiro, and L. Prost, “Selected beam measurements at PIP-II injector test facility”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR04, unpublished.
[n] E. J. Wolin et al., “cMsg - A Publish/Subscribe Interprocess Communication Package”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ04, pp. 28-30.
[n] R. A. Kostin et al., “3-Cell Superconducting Traveling Wave Cavity Tuning at Room Temperature”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 858-860. doi:10.18429/JACoW-LINAC2016-THPLR008
[n] A. M. Sessler, W. M. Fawley, and E. T. Scharlemann, “Coherence and Linewidth Studies of a 4-nm High Power FEL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1530-1533.
[n] K. Okada et al., “Upgrade of SACLA DAQ System Adapts to Multi-Beamline Operation”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO205, pp. 22-24.
[n] S. Ackermann et al., “High-Repetition-Rate Seeding Schemes Using a Resonator-Amplifier Setup”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 222-225. doi:10.18429/JACoW-FEL2019-TUP073
[n] M. W. McGee et al., “Status of 3.9 GHz Superconducting RF Cavity Technology at Fermilab”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP028, pp. 845-847.
[n] S. DiMaggio et al., “Development of One Meter-Long Lithium Plasma Source and Excimer Mode Reduction for Plasma Wakefield Applications”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA138, pp. 3705-3707.
[n] S. Di Mitri et al., “Experimental evidence of the effect of transverse Landau damping on the microbunching instability”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2590-2593. doi:10.18429/JACoW-IPAC2024-WEPR43
[n] Z. C. Zhang et al., “Design of a Superconducting Undulator Magnet Prototype for SSRF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA035, pp. 2205-2207.
[n] W. Lin, J. A. Crittenden, G. H. Hoffstaetter, Y. C. Jing, M. A. Sampson, and K. Shih, “Simulation Studies and Machine Learning Applications at the Coherent electron Cooling experiment at RHIC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2387-2390. doi:10.18429/JACoW-IPAC2022-WEPOMS057
[n] L. E. Munoz et al., “Robotic Process Automation: on the Continuity of Applications Development at SOLEIL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1275-1279. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO32
[n] Y. Miyahara and H. Nishimura, “Investigation of the Touschek Effect in VUV Electron Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3821-3824.
[n] J. Dumas et al., “SARAF Commissioning: Injector, MEBT and Chopper”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 872-877. doi:10.18429/JACoW-LINAC2022-FR1AA04
[n] H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927.
[n] R. A. Kostin et al., “Status of Superconducting Traveling Wave Cavity for High Gradient Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3591-3593. doi:10.18429/JACoW-IPAC2015-WEPWI045
[n] G. Martinet et al., “Low Temperature Properties of Piezoelectric Actuators Used in SRF Cavities Cold Tuning Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH144, pp. 390-392.
[n] D. R. Welch, “IPROP Simulations of the GAMBLE II Proton Transport Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3549-3552.
[n] J. Spencer, W. Ha, J. Mansell, T. Plettner, and J. Wisdom, “Miniaturization Techniques for Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG028, pp. 1861-1863.
[n] T. Sugimoto et al., “Current Status and Upgrade Plan of the Data-Acquisition System at SACLA”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THIA02, pp. 90-93.
[n] E. J. Minehara, “Non-thermal Laser Machining with ERL-FELs for Nuclear Industries”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THDAU04, pp. 525-528.
[n] J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313.
[n] D. E. Moncton, “Toward a Fourth-Generation X-ray Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper FR2002, pp. 1048-1051.
[n] A. Peters, R. Cee, Th. Haberer, and T. Winkelmann, “The HIT Accelerator as Part of a Medical Product: Impacts on the Maintenance Strategy”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA005, pp. 3639-3641.
[n] W. F. Bergan, “Improvements to Simulations of Microbunched Electron Cooling for the EIC”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P2008, pp. 103-106.
[n] S. P. Antipov, R. A. Kostin, S. V. Kuzikov, and A. A. Vikharev, “Inexpensive Brazeless Accelerator Prototype”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2528-2530. doi:10.18429/JACoW-IPAC2018-WEPMF068
[n] E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Coherent Radiation of an Electron Bunch Moving in an Arc of a Circle”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V027, pp. 1658-1660.
[n] W. Leemans et al., “BELLA Laser and Operations”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THYAA1, pp. 1097-1100.
[n] K. Vodopivec and B. Vacaliuc, “High Throughput Data Acquisition with EPICS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 213-217. doi:10.18429/JACoW-ICALEPCS2017-TUBPA05
For LaTeX
Use Complete Form
For BibTeX
References
- N. S. Joshi, G. Bollen, M. Brodeur, D. J. Morrissey, and S. Schwarz, “Status of NSCL Cyclotron Gas Stopper”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR087, pp. 2029-2031.
- Y. K. Batygin et al., “Particle-In-Cell Simulation of Electron-Helium Plasma in Cyclotron Gas Stopper”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC006, pp. 266-269.
- E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “MOPA FEL Scheme as a Source of Primary Photons for Gamma-Gamma Collider at TESLA and SBLC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W001, pp. 575-577.
- T. G. Berenc and M. Borland, “Modeling RF Feedback in Elegant for Bunch-Lengthening Studies for the Advanced Photon Source Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 540-542.
- A. Saini, A. Shemyakin, B. Hanna, J.-P. Carneiro, and L. Prost, “Selected beam measurements at PIP-II injector test facility”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR04, unpublished.
- E. J. Wolin et al., “cMsg - A Publish/Subscribe Interprocess Communication Package”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOZ04, pp. 28-30.
- R. A. Kostin et al., “3-Cell Superconducting Traveling Wave Cavity Tuning at Room Temperature”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 858-860.
- A. M. Sessler, W. M. Fawley, and E. T. Scharlemann, “Coherence and Linewidth Studies of a 4-nm High Power FEL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1530-1533.
- K. Okada et al., “Upgrade of SACLA DAQ System Adapts to Multi-Beamline Operation”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO205, pp. 22-24.
- S. Ackermann et al., “High-Repetition-Rate Seeding Schemes Using a Resonator-Amplifier Setup”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 222-225.
- M. W. McGee et al., “Status of 3.9 GHz Superconducting RF Cavity Technology at Fermilab”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP028, pp. 845-847.
- S. DiMaggio et al., “Development of One Meter-Long Lithium Plasma Source and Excimer Mode Reduction for Plasma Wakefield Applications”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA138, pp. 3705-3707.
- S. Di Mitri et al., “Experimental evidence of the effect of transverse Landau damping on the microbunching instability”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR43, pp. 2590-2593.
- Z. C. Zhang et al., “Design of a Superconducting Undulator Magnet Prototype for SSRF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA035, pp. 2205-2207.
- W. Lin, J. A. Crittenden, G. H. Hoffstaetter, Y. C. Jing, M. A. Sampson, and K. Shih, “Simulation Studies and Machine Learning Applications at the Coherent electron Cooling experiment at RHIC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2387-2390.
- L. E. Munoz et al., “Robotic Process Automation: on the Continuity of Applications Development at SOLEIL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO32, pp. 1275-1279.
- Y. Miyahara and H. Nishimura, “Investigation of the Touschek Effect in VUV Electron Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3821-3824.
- J. Dumas et al., “SARAF Commissioning: Injector, MEBT and Chopper”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 872-877.
- H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927.
- R. A. Kostin et al., “Status of Superconducting Traveling Wave Cavity for High Gradient Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3591-3593.
- G. Martinet et al., “Low Temperature Properties of Piezoelectric Actuators Used in SRF Cavities Cold Tuning Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH144, pp. 390-392.
- D. R. Welch, “IPROP Simulations of the GAMBLE II Proton Transport Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3549-3552.
- J. Spencer, W. Ha, J. Mansell, T. Plettner, and J. Wisdom, “Miniaturization Techniques for Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG028, pp. 1861-1863.
- T. Sugimoto et al., “Current Status and Upgrade Plan of the Data-Acquisition System at SACLA”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THIA02, pp. 90-93.
- E. J. Minehara, “Non-thermal Laser Machining with ERL-FELs for Nuclear Industries”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THDAU04, pp. 525-528.
- J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313.
- D. E. Moncton, “Toward a Fourth-Generation X-ray Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper FR2002, pp. 1048-1051.
- A. Peters, R. Cee, Th. Haberer, and T. Winkelmann, “The HIT Accelerator as Part of a Medical Product: Impacts on the Maintenance Strategy”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA005, pp. 3639-3641.
- W. F. Bergan, “Improvements to Simulations of Microbunched Electron Cooling for the EIC”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper P2008, pp. 103-106.
- S. P. Antipov, R. A. Kostin, S. V. Kuzikov, and A. A. Vikharev, “Inexpensive Brazeless Accelerator Prototype”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2528-2530.
- E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Coherent Radiation of an Electron Bunch Moving in an Arc of a Circle”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5V027, pp. 1658-1660.
- W. Leemans et al., “BELLA Laser and Operations”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THYAA1, pp. 1097-1100.
- K. Vodopivec and B. Vacaliuc, “High Throughput Data Acquisition with EPICS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 213-217.
Back to search