Favourites
For Word
[n] D. Kiehlmann, M. Peiniger, and H. Vogel, “Design and Fabrication of Normal Conducting Accelerator Sections”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1343-1345.
[n] N. Yu. Kazarinov, V. Aleksandrov, V. Shevtsov, and A. Tuzikov, “3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP065, pp. 3509-3511.
[n] P. Burrows et al., “Design, Testing and Performance Results of a High-resolution, Broad-band, Low-latency Stripline Beam Position Monitor System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1136-1138. doi:10.18429/JACoW-IPAC2015-MOPTY084
[n] G. Franchetti, “Effect of Self-consistency on Space Charge Induced Beam Loss”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME001, pp. 1556-1558.
[n] H. G. Blosser, “Adjustment of Trimming-Coil Currents”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59B07, pp. 121-124.
[n] X. H. Ke and F. Jenni, “In-situ System Identification for an Optimal Control of Magnet Power Supplies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172-1174.
[n] J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755.
[n] G. Franchetti, “Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589-591.
[n] T. H. Luo, D. J. Summers, and D. Li, “Design of a Normal-conducting RF-dipole Deflecting Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI091, pp. 2911-2913.
[n] W. R. DeVan, D. P. Gurd, J. Hammonds, S. A. Lewis, and J. D. Smith, “Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL1, pp. 355-359.
[n] A. Willner et al., “High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE007, pp. 2158-2160.
[n] R. Schurig et al., “Overview on Electron Bunch and Photon Beam Diagnostic Techniques for CW Linear Accelerators Using the Example of ELBE”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC38, pp. 158-158.
[n] M. G. Billing et al., “Dependence of the Coupling of Dipole Motion From Bunch to Bunch Caused by Electron Clouds at CesrTA Due to Variations in Bunch Length and Chromaticity”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 538-541. doi:10.18429/JACoW-NAPAC2016-TUPOB22
For LaTeX
Use Complete Form
For BibTeX
References
- D. Kiehlmann, M. Peiniger, and H. Vogel, “Design and Fabrication of Normal Conducting Accelerator Sections”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1343-1345.
- N. Yu. Kazarinov, V. Aleksandrov, V. Shevtsov, and A. Tuzikov, “3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP065, pp. 3509-3511.
- P. Burrows et al., “Design, Testing and Performance Results of a High-resolution, Broad-band, Low-latency Stripline Beam Position Monitor System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1136-1138.
- G. Franchetti, “Effect of Self-consistency on Space Charge Induced Beam Loss”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME001, pp. 1556-1558.
- H. G. Blosser, “Adjustment of Trimming-Coil Currents”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59B07, pp. 121-124.
- X. H. Ke and F. Jenni, “In-situ System Identification for an Optimal Control of Magnet Power Supplies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172-1174.
- J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755.
- G. Franchetti, “Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589-591.
- T. H. Luo, D. J. Summers, and D. Li, “Design of a Normal-conducting RF-dipole Deflecting Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI091, pp. 2911-2913.
- W. R. DeVan, D. P. Gurd, J. Hammonds, S. A. Lewis, and J. D. Smith, “Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL1, pp. 355-359.
- A. Willner et al., “High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE007, pp. 2158-2160.
- R. Schurig et al., “Overview on Electron Bunch and Photon Beam Diagnostic Techniques for CW Linear Accelerators Using the Example of ELBE”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC38, pp. 158-158.
- M. G. Billing et al., “Dependence of the Coupling of Dipole Motion From Bunch to Bunch Caused by Electron Clouds at CesrTA Due to Variations in Bunch Length and Chromaticity”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 538-541.
Back to search