Favourites
For Word
[n] E. Roussel et al., “Microbunching Instability in Relativistic Electron Bunches: Direct Observations of the Microstructures Using Ultrafast YBCO Detectors”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 17-21. doi:10.18429/JACoW-IBIC2015-MOCLA01
[n] G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1249-1253.
[n] S. H. Kim et al., “Preservation of Quality Factor of Half Wave Resonator during Quenching in the Presence of Solenoid Field”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3270-3272. doi:10.18429/JACoW-IPAC2015-WEPTY009
[n] D. Voulot, M. A. Fraser, D. Lanaia, and T. Olsson, “Transverse Emittance Measurements of the REX-ISOLDE Beams in Preparation for the HIE-ISOLDE Commissioning”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP037, pp. 513-515.
[n] J. R. Richardson, E. W. Blackmore, M. K. Craddock, G. Dutto, C. J. Kost, and G. H. Mackenzie, “Production of Simultaneous, Variable Energy Beams from the TRIUMF Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1402-1408.
[n] H.-D. Gr?ñf and A. Richter, “The Darmstadt Superconducting Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU2-02, pp. 231-236.
[n] M. J. Vicente, “Conceptual Design of the Vacuum System for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP098L, pp. 2530-2534.
[n] J. Jacob, L. Farvacque, G. Gautier, M. L. Langlois, and J. M. Mercier, “Commissioning of First 352.2 MHz - 150 kW Solid State Amplifiers at the ESRF and Status of R&D”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI004, pp. 2708-2710.
[n] G. Lebec, C. Benabderrahmane, and J. Chavanne, “Simulation of NdFeB Permanent Magnets at Low Temperature”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP085, pp. 327-329.
[n] A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC19, pp. 186-188.
[n] S. Sandru, V. Babin, M. R. Leonovici, and V. I. R. Niculescu, “On a Biscuit Current Undulator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC126, pp. 2303-2304.
[n] A. Ijspeert, M. Karppinen, and S. Russenschuck, “Automated Design of a Correction Dipole Magnet for LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP025G, pp. 1250-1252.
[n] G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
[n] T. Honda and M. Katoh, “A Single-Pass Beam Position Monitor for the Injection Beam at the Photon Factory Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP050L, pp. 1660-1662.
[n] W. Shields et al., “Observations of Microbunching Instabilities from a THz Port at Diamond Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR079, pp. 3114-3116.
[n] S. Koscielniak, “Correction of Field Errors in ISAC RFQ”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP133G, pp. 1298-1300.
[n] G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206.
[n] S. M. Liuzzo et al., “Preparation of the EBS Beam Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1388-1391. doi:10.18429/JACoW-IPAC2019-TUPGW005
[n] A. Araz, U. Bonnes, R. Eichhorn, F. Hug, M. Konrad, and A. Richter, “Development of an FPGA Based RF Control System For the S-DALINAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP026, pp. 718-720.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Roussel et al., “Microbunching Instability in Relativistic Electron Bunches: Direct Observations of the Microstructures Using Ultrafast YBCO Detectors”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 17-21.
- G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1249-1253.
- S. H. Kim et al., “Preservation of Quality Factor of Half Wave Resonator during Quenching in the Presence of Solenoid Field”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3270-3272.
- D. Voulot, M. A. Fraser, D. Lanaia, and T. Olsson, “Transverse Emittance Measurements of the REX-ISOLDE Beams in Preparation for the HIE-ISOLDE Commissioning”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP037, pp. 513-515.
- J. R. Richardson, E. W. Blackmore, M. K. Craddock, G. Dutto, C. J. Kost, and G. H. Mackenzie, “Production of Simultaneous, Variable Energy Beams from the TRIUMF Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1402-1408.
- H.-D. Gr?ñf and A. Richter, “The Darmstadt Superconducting Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU2-02, pp. 231-236.
- M. J. Vicente, “Conceptual Design of the Vacuum System for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP098L, pp. 2530-2534.
- J. Jacob, L. Farvacque, G. Gautier, M. L. Langlois, and J. M. Mercier, “Commissioning of First 352.2 MHz - 150 kW Solid State Amplifiers at the ESRF and Status of R&D”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI004, pp. 2708-2710.
- G. Lebec, C. Benabderrahmane, and J. Chavanne, “Simulation of NdFeB Permanent Magnets at Low Temperature”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP085, pp. 327-329.
- A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC19, pp. 186-188.
- S. Sandru, V. Babin, M. R. Leonovici, and V. I. R. Niculescu, “On a Biscuit Current Undulator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC126, pp. 2303-2304.
- A. Ijspeert, M. Karppinen, and S. Russenschuck, “Automated Design of a Correction Dipole Magnet for LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP025G, pp. 1250-1252.
- G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
- T. Honda and M. Katoh, “A Single-Pass Beam Position Monitor for the Injection Beam at the Photon Factory Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP050L, pp. 1660-1662.
- W. Shields et al., “Observations of Microbunching Instabilities from a THz Port at Diamond Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR079, pp. 3114-3116.
- S. Koscielniak, “Correction of Field Errors in ISAC RFQ”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP133G, pp. 1298-1300.
- G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206.
- S. M. Liuzzo et al., “Preparation of the EBS Beam Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1388-1391.
- A. Araz, U. Bonnes, R. Eichhorn, F. Hug, M. Konrad, and A. Richter, “Development of an FPGA Based RF Control System For the S-DALINAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP026, pp. 718-720.
Back to search