Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
[n] R. Nagaoka et al., “Study of Ion-induced Instabilities and Transverse Feedback Performance at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS049, pp. 712-714.
[n] J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
[n] R. Wider?Âe, J. P. Blaser, G. Burton, B. Larsson, and K. E. Scheer, “Panel Session: Accelerators for Hospitals”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-01, pp. 403-407.
[n] T. P. Wangler et al., “Linear Accelerator for Production of Tritium: Physics Design Challenges”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH102, pp. 548-552.
[n] V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210.
[n] J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452.
[n] J. P. Lidestri, “A Synchrotron Design for Macromolecular Structure Determination”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH127, pp. 2772-2774.
[n] Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4098-4100. doi:10.18429/JACoW-IPAC2016-THPOY007
[n] D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
[n] E. Daly et al., “Improved Prototype Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB077, pp. 1377-1379.
[n] H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
[n] K. W. Shepard, M. Kedzie, J. R. Delayen, J. Mammosser, and C. Piller, “Prototype 350 MHz Niobium Spoke-loaded Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP123, pp. 955-956.
[n] J. F. Tooker et al., “Parameter Overview of SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-11, pp. 323-325.
[n] L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311.
[n] M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
[n] B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1316-1318. doi:10.18429/JACoW-IPAC2014-TUPRO113
[n] R. Nussbaumer, D. Dale, H. Hui, J. Richards, and P. Levy, “The Laser Stabilization Controls for the ISAC Beam Polarizer”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP065, pp. XX-XX.
[n] X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX.
[n] F. Fer, “Theoretical Study of Beam Extraction by the Method of Curvilinear Coordinates”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E08, pp. XX-XX.
[n] G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
[n] L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
[n] R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2150-2153.
[n] M. Riva, B. Esposito, and D. Marocco, “A Novel FPGA-based Digital Approach to Neutron/Gamma-Ray Pulse Acquisition and Discrimination in Scintillators”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_041.
[n] R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 180-185.
[n] C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Preparation and Study of Bunches Containing 1011Protons in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2037-2040.
[n] T. Fujita, T. Kasuga, Y. Minagawa, and T. Obina, “Detection of Wake Field Using Test-Bunch Method at Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG039, pp. 3261-3263.
[n] M. P. Howell et al., “History of Cryomodule Repairs at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP109, pp. 1108-1110.
[n] H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154.
[n] D. Van Winkle, J. Browne, J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Teytelman, “Amplitude Linearizers for PEP-II 1.2 MW Klystrons and LLRF Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH200, pp. 1480-1482.
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n] D. L. Bruhwiler et al., “Cross-platform and Cloud-based Access to Multiple Particle Accelerator Codes via Application Containers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 720-723. doi:10.18429/JACoW-IPAC2015-MOPMN009
[n] R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA003, pp. 10-14.
[n] C. M. Lyneis, D. J. Clark, and Z. Q. Xie, “LBNL 88-Inch Cyclotron Improvements”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-03, pp. 173-176.
[n] U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3631-3634.
[n] H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
[n] J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “An Overview of the MaRIE X-FEL and Electron Radiography Linac RF Systems”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3482-3484. doi:10.18429/JACoW-IPAC2015-WEPWI001
[n] E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n] W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277.
[n] H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n] L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686.
[n] H. K. Yue et al., “Analysis and Design of Matching Unit for a RF Driven Plasma Source for Fusion Purpose”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI047, pp. 389-391.
[n] R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2624-2626. doi:10.18429/JACoW-IPAC2015-WEPWA053
[n] M. E. Read, V. Ivanov, L. Ives, A. Krasnykh, and G. Miram, “Gridded Sheet Beam Gun for a Sheet Beam Klystron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE026, pp. 1137-1139.
[n] Ch. Markovits, S. Jaccard, and Ch. Perret, “The Proton Beam Facility OPTIS for the Therapy of Ocular Tumours”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-02, pp. 507-510.
[n] A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253.
[n] R. Neswold and C. King, “Generation of Simple, Type-Safe Messages for Inter-Task Communications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP024, pp. 137-139.
[n] R. D?Âlling, F. Marcellini, and M. Sapinski, “Test of a Prototype for Modular Profile and Position Monitors in the Shielding of the 590 MeV Beam Line at HIPA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 92-95. doi:10.18429/JACoW-IBIC2022-MOP24
[n] L. R. Carmichael, M. D. Church, R. Neswold, and A. Warner, “Development of a Machine Protection System for the Superconducting Beam Test Facility at FERMILAB”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU013, pp. 1084-1086.
[n] A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and J. Watson, “Quantum Yield Measurements of Photocathodes Illuminated by Pulsed Ultraviolet Laser Radiation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1993-1996.
[n] J. P. Edelen, M. V. Keilman, P. Moeller, and R. Nagler, “A Cloud Based Framework for Advanced Accelerator Controls”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 656. doi:10.18429/JACoW-ICALEPCS2019-MOSH4002
[n] R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
[n] T. K. Kroc, T. B. Bolshakov, A. V. Burov, S. Seletsky, and A. V. Shemyakin, “Electron Beam Size Measurements in a Cooling Solenoid”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT069, pp. 3801-3803.
[n] E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663.
[n] A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n] E. Syresin et al., “Synchrotron Radiation Test Validations of European XFEL MCP-based Detectors at DORIS Beamline BW1”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2180-2182. doi:10.18429/JACoW-IPAC2014-WEPRO094
[n] A. Scheinker, “Model Independent Beam Tuning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA068, pp. 1862-1864.
[n] L. Zhao, S. An, Y. J. Ke, Z. Pengjiao, L. Wenliang, and B. Z. Zhou, “Development of 150.4MHz Continuous Wave Solid-state Amplifier”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 917-919. doi:10.18429/JACoW-LINAC2018-THPO104
[n] L. H. Chen et al., “Thermal Simulations of a New Target Configuration for Production of Radioactive Nuclide”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI026, pp. 336-338.
[n] C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 207-210.
[n] N. Barov, J. S. Kim, and D. J. Newsham, “A Compact, Low-Voltage Multi-Beam Klystron for 1300 MHz Cryomodules”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP015, pp. 842-842.
[n] A. H. Regan, S. I. Kwon, Y. M. Wang, and C. D. Ziomek, “LEDA LLRF Control System Performance: Model and Operational Experience”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA2, pp. 1064-1066.
[n] N. Yu. Kazarinov and F. R. Osswald, “Simulation of Hollow Beam Formation at the Initial Part of RIB Transport Channel of SPIRAL2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS017, pp. 3457-3459.
[n] T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
[n] M. Xiao, “Transport from the Recycler Ring to the Antiproton Source Beamlines”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR086, pp. 2026-2028.
[n] G. O. Bolme, G. P. Boicourt, K. F. Johnson, R. A. Lohsen, O. R. Sander, and L. S. Walling, “Measurement of RF Accelerator Cavity Field Levels at High Power from X-Ray Emissions”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO461, pp. 219-222.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
- R. Nagaoka et al., “Study of Ion-induced Instabilities and Transverse Feedback Performance at SOLEIL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS049, pp. 712-714.
- J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
- R. Wider?Âe, J. P. Blaser, G. Burton, B. Larsson, and K. E. Scheer, “Panel Session: Accelerators for Hospitals”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-01, pp. 403-407.
- T. P. Wangler et al., “Linear Accelerator for Production of Tritium: Physics Design Challenges”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH102, pp. 548-552.
- V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210.
- J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452.
- J. P. Lidestri, “A Synchrotron Design for Macromolecular Structure Determination”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH127, pp. 2772-2774.
- Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4098-4100.
- D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
- E. Daly et al., “Improved Prototype Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB077, pp. 1377-1379.
- H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
- K. W. Shepard, M. Kedzie, J. R. Delayen, J. Mammosser, and C. Piller, “Prototype 350 MHz Niobium Spoke-loaded Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP123, pp. 955-956.
- J. F. Tooker et al., “Parameter Overview of SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-11, pp. 323-325.
- L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311.
- M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
- B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1316-1318.
- R. Nussbaumer, D. Dale, H. Hui, J. Richards, and P. Levy, “The Laser Stabilization Controls for the ISAC Beam Polarizer”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP065, pp. XX-XX.
- X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX.
- F. Fer, “Theoretical Study of Beam Extraction by the Method of Curvilinear Coordinates”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E08, pp. XX-XX.
- G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
- L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
- R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2150-2153.
- M. Riva, B. Esposito, and D. Marocco, “A Novel FPGA-based Digital Approach to Neutron/Gamma-Ray Pulse Acquisition and Discrimination in Scintillators”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_041.
- R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 180-185.
- C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Preparation and Study of Bunches Containing 1011Protons in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2037-2040.
- T. Fujita, T. Kasuga, Y. Minagawa, and T. Obina, “Detection of Wake Field Using Test-Bunch Method at Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG039, pp. 3261-3263.
- M. P. Howell et al., “History of Cryomodule Repairs at SNS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP109, pp. 1108-1110.
- H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154.
- D. Van Winkle, J. Browne, J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Teytelman, “Amplitude Linearizers for PEP-II 1.2 MW Klystrons and LLRF Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH200, pp. 1480-1482.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
- D. L. Bruhwiler et al., “Cross-platform and Cloud-based Access to Multiple Particle Accelerator Codes via Application Containers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 720-723.
- R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOA003, pp. 10-14.
- C. M. Lyneis, D. J. Clark, and Z. Q. Xie, “LBNL 88-Inch Cyclotron Improvements”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-03, pp. 173-176.
- U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3631-3634.
- H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
- J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “An Overview of the MaRIE X-FEL and Electron Radiography Linac RF Systems”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3482-3484.
- E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 582-585.
- W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277.
- H. Li et al., “The Status of CSNS Front End”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 771-773.
- L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686.
- H. K. Yue et al., “Analysis and Design of Matching Unit for a RF Driven Plasma Source for Fusion Purpose”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI047, pp. 389-391.
- R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2624-2626.
- M. E. Read, V. Ivanov, L. Ives, A. Krasnykh, and G. Miram, “Gridded Sheet Beam Gun for a Sheet Beam Klystron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE026, pp. 1137-1139.
- Ch. Markovits, S. Jaccard, and Ch. Perret, “The Proton Beam Facility OPTIS for the Therapy of Ocular Tumours”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-02, pp. 507-510.
- A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253.
- R. Neswold and C. King, “Generation of Simple, Type-Safe Messages for Inter-Task Communications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP024, pp. 137-139.
- R. D?Âlling, F. Marcellini, and M. Sapinski, “Test of a Prototype for Modular Profile and Position Monitors in the Shielding of the 590 MeV Beam Line at HIPA”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 92-95.
- L. R. Carmichael, M. D. Church, R. Neswold, and A. Warner, “Development of a Machine Protection System for the Superconducting Beam Test Facility at FERMILAB”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU013, pp. 1084-1086.
- A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and J. Watson, “Quantum Yield Measurements of Photocathodes Illuminated by Pulsed Ultraviolet Laser Radiation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1993-1996.
- J. P. Edelen, M. V. Keilman, P. Moeller, and R. Nagler, “A Cloud Based Framework for Advanced Accelerator Controls”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 656.
- R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
- T. K. Kroc, T. B. Bolshakov, A. V. Burov, S. Seletsky, and A. V. Shemyakin, “Electron Beam Size Measurements in a Cooling Solenoid”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT069, pp. 3801-3803.
- E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663.
- A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 575-578.
- E. Syresin et al., “Synchrotron Radiation Test Validations of European XFEL MCP-based Detectors at DORIS Beamline BW1”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2180-2182.
- A. Scheinker, “Model Independent Beam Tuning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA068, pp. 1862-1864.
- L. Zhao, S. An, Y. J. Ke, Z. Pengjiao, L. Wenliang, and B. Z. Zhou, “Development of 150.4MHz Continuous Wave Solid-state Amplifier”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 917-919.
- L. H. Chen et al., “Thermal Simulations of a New Target Configuration for Production of Radioactive Nuclide”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI026, pp. 336-338.
- C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 207-210.
- N. Barov, J. S. Kim, and D. J. Newsham, “A Compact, Low-Voltage Multi-Beam Klystron for 1300 MHz Cryomodules”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP015, pp. 842-842.
- A. H. Regan, S. I. Kwon, Y. M. Wang, and C. D. Ziomek, “LEDA LLRF Control System Performance: Model and Operational Experience”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA2, pp. 1064-1066.
- N. Yu. Kazarinov and F. R. Osswald, “Simulation of Hollow Beam Formation at the Initial Part of RIB Transport Channel of SPIRAL2”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS017, pp. 3457-3459.
- T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
- M. Xiao, “Transport from the Recycler Ring to the Antiproton Source Beamlines”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR086, pp. 2026-2028.
- G. O. Bolme, G. P. Boicourt, K. F. Johnson, R. A. Lohsen, O. R. Sander, and L. S. Walling, “Measurement of RF Accelerator Cavity Field Levels at High Power from X-Ray Emissions”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO461, pp. 219-222.
Back to search