Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Rossi et al., “Commissioning and Operational Experience Gained with the Linac4 RFQ at CERN”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP037, pp. 926-928.
[n] A. M. Lombardi, “Commissioning of the Low-Energy Part of Linac4”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOA02, pp. 6-10.
[n] W. Bauer et al., “Design Study of a Superconducting Deflecting Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 181-186.
[n] M. S. Toplis, J. W. McKenzie, B. D. Muratori, D. J. Scott, and P. H. Williams, “Comparison of Model vs. Reality for VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1810-1813. doi:10.18429/JACoW-IPAC2016-TUPOW028
[n] E. Bravin, “High Resolution Transverse Profile Measurement”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper MOO1A02, pp. XX-XX.
[n] H. M. Xie, “IPM design and new ideas for HIAF”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPMO23, unpublished.
[n] D. Trines, “Status of the TESLA Design”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO1002, pp. 8-12.
[n] J. L. Abelleira, E. Cruz Alaniz, A. Seryi, L. van Riesen-Haupt, and M. I. Besana, “FCC-hh Final-Focus for Flat-Beams: Parameters and Energy Deposition Studies”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2139-2142. doi:10.18429/JACoW-IPAC2017-TUPVA037
[n] I. S. Ko and J. H. Han, “Current Status of PAL-XFEL”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOB04, pp. 26-30.
[n] R. Bruce, “SixTrack Simulations of Beam Cleaning During High-beta Operation in the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2060-2063. doi:10.18429/JACoW-IPAC2015-TUPTY027
[n] H. Brand et al., “The PHELIX Control System Based on UML Design Level Programming in LabVIEW”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP549, pp. XX-XX.
[n] G. Stancari, A. Valishev, R. Bruce, S. Redaelli, A. Rossi, and B. Salvachua, “Electron Lenses for the Large Hadron Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 918-920. doi:10.18429/JACoW-IPAC2014-TUOBA01
[n] P. J. Tipping, J. W. McKenzie, and B. L. Militsyn, “Simulations of Field Emitted Dark Current Dynamics in DC Photoinjectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3971-3974. doi:10.18429/JACoW-IPAC2016-THPOW018
[n] T. K??rzeder et al., “Commissioning of a Cleanroom for SRF Activities at the Helmholtz Institute Mainz”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1162-1167. doi:10.18429/JACoW-SRF2019-THP101
[n] P. D. Hermes, R. Bruce, J. M. Jowett, and S. Redaelli, “Betatron Cleaning for Heavy Ion Beams with IR7 Dispersion Suppressor Collimators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2057-2059. doi:10.18429/JACoW-IPAC2015-TUPTY025
[n] V. M. Pugatch et al., “Micro-strip Metal Foil Detectors for the Beam Profile Monitoring”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTMM02, pp. XX-XX.
[n] A. Lechner et al., “Protection of Superconducting Magnets in Case of Accidental Beam Losses during HL-LHC Injection”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2128-2131. doi:10.18429/JACoW-IPAC2015-TUPTY049
[n] D. Leitner et al., “Removal and Installation Planning for the Advanced Light Source - Upgrade Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1609-1611. doi:10.18429/JACoW-IPAC2019-TUPGW088
[n] L. Arnaudon, M. D. Disdier, P. M. Maesen, and M. P. Prax, “Control of the LHC 400 MHz RF System (ACS)”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT004, pp. 533-535.
[n] B. D. Muratori, J. K. Jones, and H. L. Owen, “An EMMA Racetrack”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD020, pp. 1452-1454.
[n] L. Lari, R. Bruce, and F. Cerutti, “Studies of Thermal Loads on Collimators for HL-LHC Optics in case of Fast Losses”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO047, pp. 999-1001.
[n] K. Eiler, “Characterisation of Magnetic Shielding Material for HL-LHC Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 273-277. doi:10.18429/JACoW-SRF2017-MOPB089
[n] R. Versaci, V. Baglin, M. Brugger, and A. Mereghetti, “Exploiting the Undesired: Beam-gas Interactions in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR063, pp. 927-929.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Rossi et al., “Commissioning and Operational Experience Gained with the Linac4 RFQ at CERN”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP037, pp. 926-928.
- A. M. Lombardi, “Commissioning of the Low-Energy Part of Linac4”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOA02, pp. 6-10.
- W. Bauer et al., “Design Study of a Superconducting Deflecting Cavity”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 181-186.
- M. S. Toplis, J. W. McKenzie, B. D. Muratori, D. J. Scott, and P. H. Williams, “Comparison of Model vs. Reality for VELA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1810-1813.
- E. Bravin, “High Resolution Transverse Profile Measurement”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper MOO1A02, pp. XX-XX.
- H. M. Xie, “IPM design and new ideas for HIAF”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUPMO23, unpublished.
- D. Trines, “Status of the TESLA Design”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO1002, pp. 8-12.
- J. L. Abelleira, E. Cruz Alaniz, A. Seryi, L. van Riesen-Haupt, and M. I. Besana, “FCC-hh Final-Focus for Flat-Beams: Parameters and Energy Deposition Studies”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2139-2142.
- I. S. Ko and J. H. Han, “Current Status of PAL-XFEL”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOB04, pp. 26-30.
- R. Bruce, “SixTrack Simulations of Beam Cleaning During High-beta Operation in the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2060-2063.
- H. Brand et al., “The PHELIX Control System Based on UML Design Level Programming in LabVIEW”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP549, pp. XX-XX.
- G. Stancari, A. Valishev, R. Bruce, S. Redaelli, A. Rossi, and B. Salvachua, “Electron Lenses for the Large Hadron Collider”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 918-920.
- P. J. Tipping, J. W. McKenzie, and B. L. Militsyn, “Simulations of Field Emitted Dark Current Dynamics in DC Photoinjectors”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3971-3974.
- T. K??rzeder et al., “Commissioning of a Cleanroom for SRF Activities at the Helmholtz Institute Mainz”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1162-1167.
- P. D. Hermes, R. Bruce, J. M. Jowett, and S. Redaelli, “Betatron Cleaning for Heavy Ion Beams with IR7 Dispersion Suppressor Collimators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2057-2059.
- V. M. Pugatch et al., “Micro-strip Metal Foil Detectors for the Beam Profile Monitoring”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper CTMM02, pp. XX-XX.
- A. Lechner et al., “Protection of Superconducting Magnets in Case of Accidental Beam Losses during HL-LHC Injection”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2128-2131.
- D. Leitner et al., “Removal and Installation Planning for the Advanced Light Source - Upgrade Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1609-1611.
- L. Arnaudon, M. D. Disdier, P. M. Maesen, and M. P. Prax, “Control of the LHC 400 MHz RF System (ACS)”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT004, pp. 533-535.
- B. D. Muratori, J. K. Jones, and H. L. Owen, “An EMMA Racetrack”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD020, pp. 1452-1454.
- L. Lari, R. Bruce, and F. Cerutti, “Studies of Thermal Loads on Collimators for HL-LHC Optics in case of Fast Losses”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO047, pp. 999-1001.
- K. Eiler, “Characterisation of Magnetic Shielding Material for HL-LHC Crab Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 273-277.
- R. Versaci, V. Baglin, M. Brugger, and A. Mereghetti, “Exploiting the Undesired: Beam-gas Interactions in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR063, pp. 927-929.
Back to search