Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Gaowei and J. Cen, “New Methods of Synthesizing Ultra-Smooth and High Efficiency Alkali Antimonide Photocathodes for Future Light Sources”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper TUYBA5, unpublished.
[n] B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
[n] G. Gelato and L. Magnani, “Better Dynamic Closed Loop control of the PSB RF Accelerating System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1536-1539.
[n] A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842.
[n] C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 375-379. doi:10.18429/JACoW-ICALEPCS2017-TUPHA006
[n] A. Regan et al., “Newly Designed Field Control Module for the SNS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB036, pp. 3371-3373.
[n] S. Heifets and A. Michailichenko, “On the Impedance Due to Synchrotron Radiation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 458-461.
[n] D. F. Cosgrove, C. Curtis, and E. Gray, “Injection Methods in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1423-1426.
[n] T. Barts and W. Chou, “The Computer Code BPERM for Wakepotential & Impedance Calculations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB10, pp. 2294-2296.
[n] Y. Tang, K. C. D. Chan, C. Ekdahl, and T. P. Hughes, “BBU Calculations for Beam Stability Experiments on DARHT-2”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH069, pp. 2943-2945.
[n] B. Muratori, J. Crone, J. Jones, T. Pacey, D. Symes, and H. Owen, “The EPAC electron transport beamline - physics considerations and design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1553-1556. doi:10.18429/JACoW-IPAC2023-TUPA105
[n] O. Nezhevenko et al., “Magnicon - High Power RF Source for TESLA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1924-1927.
[n] R. Moser et al., “ProShell ÔÇô The MedAustron Accelerator Control Procedure Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN005, pp. 246-249.
[n] J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n] A. Vergara-Fern?índez et al., “Information Management within the LHC Hardware Commissioning Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP008, pp. 4791-4793.
[n] A. H. Lumpkin et al., “Investigations of Electron-Beam Microbunching and Beam Coalignment Using CTR in a High-Gain SASE FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB011, pp. 550-552.
[n] A. Miura et al., “Bunch Length Measurement of 181 MeV Beam in J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME027, pp. 532-534.
[n] L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
[n] G. Ulm, F. Bellorini, D. P. Brodrick, R. N. Fernandes, N. Levchenko, and D. P. Piso, “PLC Factory: Automating Routine Tasks in Large-Scale PLC Software Development”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 495-500. doi:10.18429/JACoW-ICALEPCS2017-TUPHA046
[n] R. N. Fernandes, S. R. Gysin, S. Regnell, S. Sah, M. Vitorovic, and V. Vuppala, “Controls Configuration Database at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 775-779. doi:10.18429/JACoW-ICALEPCS2017-TUPHA156
[n] G. Mavrogenes, Y. Cho, and T. Khoe, “Positron Injection Linac System for the Argonne Light Source”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-2, pp. 431-433.
[n] R. Koontz, “Design Optimization and Construction of the Thyratron/PFN Based Cost Model Modulator for the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP16, pp. 1512-1514.
[n] R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2150-2153.
[n] E. L?®corch?® and P. Lermine, “Use of the Ingres RDBMS inside the new Ganil Linux based control system”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_087.
[n] S. R. Smith et al., “LCLS Cavity Beam Position Monitors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUOC03, pp. 285-287.
[n] G. T. Danby and J. W. Jackson, “Superconductivitty and Future Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3405-3408.
[n] R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1303-1306.
[n] N. Malitsky, J. Smith, and J. Wei, “A Prototype of the UAL 2.0 Application Toolkit”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP013, pp. XX-XX.
[n] J. Nash et al., “Precision Measurements of the SLC Beam Energy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1550-1553.
[n] P. W. Allison, C. R. Emigh, and R. R. Stevens Jr, “Initial Operation of the Beam-Transport System In the LAMPF Injector Complex”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper B-3, pp. 143-161.
[n] F. Rossi and M. Ferianis, “Installation and Commissioning of the Pulsed Optical Timing System Extension”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 451-454. doi:10.18429/JACoW-IBIC2022-WEP25
For LaTeX
Use Complete Form
For BibTeX
References
- M. Gaowei and J. Cen, “New Methods of Synthesizing Ultra-Smooth and High Efficiency Alkali Antimonide Photocathodes for Future Light Sources”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper TUYBA5, unpublished.
- B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
- G. Gelato and L. Magnani, “Better Dynamic Closed Loop control of the PSB RF Accelerating System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1536-1539.
- A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842.
- C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 375-379.
- A. Regan et al., “Newly Designed Field Control Module for the SNS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB036, pp. 3371-3373.
- S. Heifets and A. Michailichenko, “On the Impedance Due to Synchrotron Radiation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 458-461.
- D. F. Cosgrove, C. Curtis, and E. Gray, “Injection Methods in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1423-1426.
- T. Barts and W. Chou, “The Computer Code BPERM for Wakepotential & Impedance Calculations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB10, pp. 2294-2296.
- Y. Tang, K. C. D. Chan, C. Ekdahl, and T. P. Hughes, “BBU Calculations for Beam Stability Experiments on DARHT-2”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH069, pp. 2943-2945.
- B. Muratori, J. Crone, J. Jones, T. Pacey, D. Symes, and H. Owen, “The EPAC electron transport beamline - physics considerations and design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA105, pp. 1553-1556.
- O. Nezhevenko et al., “Magnicon - High Power RF Source for TESLA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1924-1927.
- R. Moser et al., “ProShell ÔÇô The MedAustron Accelerator Control Procedure Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN005, pp. 246-249.
- J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244.
- A. Vergara-Fern?índez et al., “Information Management within the LHC Hardware Commissioning Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP008, pp. 4791-4793.
- A. H. Lumpkin et al., “Investigations of Electron-Beam Microbunching and Beam Coalignment Using CTR in a High-Gain SASE FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB011, pp. 550-552.
- A. Miura et al., “Bunch Length Measurement of 181 MeV Beam in J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME027, pp. 532-534.
- L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
- G. Ulm, F. Bellorini, D. P. Brodrick, R. N. Fernandes, N. Levchenko, and D. P. Piso, “PLC Factory: Automating Routine Tasks in Large-Scale PLC Software Development”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 495-500.
- R. N. Fernandes, S. R. Gysin, S. Regnell, S. Sah, M. Vitorovic, and V. Vuppala, “Controls Configuration Database at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 775-779.
- G. Mavrogenes, Y. Cho, and T. Khoe, “Positron Injection Linac System for the Argonne Light Source”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-2, pp. 431-433.
- R. Koontz, “Design Optimization and Construction of the Thyratron/PFN Based Cost Model Modulator for the NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP16, pp. 1512-1514.
- R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2150-2153.
- E. L?®corch?® and P. Lermine, “Use of the Ingres RDBMS inside the new Ganil Linux based control system”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_087.
- S. R. Smith et al., “LCLS Cavity Beam Position Monitors”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUOC03, pp. 285-287.
- G. T. Danby and J. W. Jackson, “Superconductivitty and Future Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3405-3408.
- R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1303-1306.
- N. Malitsky, J. Smith, and J. Wei, “A Prototype of the UAL 2.0 Application Toolkit”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP013, pp. XX-XX.
- J. Nash et al., “Precision Measurements of the SLC Beam Energy”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1550-1553.
- P. W. Allison, C. R. Emigh, and R. R. Stevens Jr, “Initial Operation of the Beam-Transport System In the LAMPF Injector Complex”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper B-3, pp. 143-161.
- F. Rossi and M. Ferianis, “Installation and Commissioning of the Pulsed Optical Timing System Extension”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 451-454.
Back to search