Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Defendini, R. Jones, J. P. Matheys, P. Vande Vyvre, and A. Vascotto, “The State Manager: A Tool to Control Large Data-Acquisition Systems”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 524-527. doi:10.18429/JACoW-ICALEPCS1991-S14OOP06
[n] S. Benitez Berrocal et al., “Development and Testing of a Cherenkov Beam Loss Monitor in CLEAR Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2640-2643. doi:10.18429/JACoW-IPAC2021-WEPAB021
[n] M. S. Champion, M. P. Kelly, A. M. Rowe, J. P. Ozelis, and C. M. Ginsburg, “Superconducting RF Cavity Production Processing and Testing at Fermilab”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP026, pp. 815-817.
[n] P. Madela, G. Abeillé, Y.-M. Abiven, X. Elattaoui, J. Pham, and F. Potier, “Conan for Building C++ Tango Devices at SOLEIL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1227-1230. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO15
[n] J. Rodnizki and Z. Horvitz, “RF and Heat Flow Simulations of the SARAF RFQ 1.5 MeV/nucleon Proton/Deuteron Accelerator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP045, pp. 506-508.
[n] A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished.
[n] C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246.
[n] D. A. Swenson and C. A. Willis, “High-Power Lithium Target for Accelerator-Based BNCT”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP063, pp. 223-225.
[n] G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
[n] R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 672-677.
[n] B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 141-143. doi:10.18429/JACoW-RUPAC2016-THCDMH02
[n] N. Solyak et al., “Performance of the First LCLS-II Cryomodules: Issues and Solutions”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 34-37. doi:10.18429/JACoW-IPAC2018-MOZGBD3
[n] Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440.
[n] R. J. Barlow, G. Yu. Kourevlev, and A. Mercer, “Simulation of Wake Field Effects on High Energy Particle Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP028, pp. 2018-2020.
[n] Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495.
[n] S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n] H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
[n] N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
[n] Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
[n] T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775.
[n] B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
[n] A. Olmos et al., “Commissioning of the ALBA Fast Orbit Feedback System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD23, pp. 691-695.
[n] T. Chanwattana et al., “Upgrades of beam diagnostics for linac of Siam Photon Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1046-1049. doi:10.18429/JACoW-IPAC2023-MOPM028
[n] P. Arcioni, K. Ko, and R. P. Pendleton, “Numerical Evaluation of Beam Coupling Impedances in Heavily Damped Accelerating Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 907-910.
[n] D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
[n] Yu. N. Denisov, “Cyclotrons of the JINR Laboratory of Nuclear Problems (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-07, pp. 62-67.
[n] Yu. N. Denisov and V. N. Anosov, “Automatic Parameter Measuring Systems and Control Systems for Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-10, pp. 617-620.
[n] D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 192-195. doi:10.18429/JACoW-NAPAC2019-MOPLH10
[n] V. Roger, S. K. Chandrasekaran, and D. Passarelli, “Design Strategy of the PIP-II Cryomodules”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 307-310. doi:10.18429/JACoW-SRF2019-MOP094
[n] B. Baklakov et al., “Ground Motion Measurements for Fermilab Future Collider Projects”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA133, pp. 1387-1389.
[n] D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n] M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 258-260. doi:10.18429/JACoW-MEDSI2018-WEPH24
For LaTeX
Use Complete Form
For BibTeX
References
- A. Defendini, R. Jones, J. P. Matheys, P. Vande Vyvre, and A. Vascotto, “The State Manager: A Tool to Control Large Data-Acquisition Systems”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S14OOP06, pp. 524-527.
- S. Benitez Berrocal et al., “Development and Testing of a Cherenkov Beam Loss Monitor in CLEAR Facility”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2640-2643.
- M. S. Champion, M. P. Kelly, A. M. Rowe, J. P. Ozelis, and C. M. Ginsburg, “Superconducting RF Cavity Production Processing and Testing at Fermilab”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP026, pp. 815-817.
- P. Madela, G. Abeillé, Y.-M. Abiven, X. Elattaoui, J. Pham, and F. Potier, “Conan for Building C++ Tango Devices at SOLEIL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO15, pp. 1227-1230.
- J. Rodnizki and Z. Horvitz, “RF and Heat Flow Simulations of the SARAF RFQ 1.5 MeV/nucleon Proton/Deuteron Accelerator”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP045, pp. 506-508.
- A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished.
- C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246.
- D. A. Swenson and C. A. Willis, “High-Power Lithium Target for Accelerator-Based BNCT”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP063, pp. 223-225.
- G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
- R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 672-677.
- B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 141-143.
- N. Solyak et al., “Performance of the First LCLS-II Cryomodules: Issues and Solutions”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 34-37.
- Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440.
- R. J. Barlow, G. Yu. Kourevlev, and A. Mercer, “Simulation of Wake Field Effects on High Energy Particle Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP028, pp. 2018-2020.
- Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495.
- S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 345.
- H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
- N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
- Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
- T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775.
- B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
- A. Olmos et al., “Commissioning of the ALBA Fast Orbit Feedback System”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD23, pp. 691-695.
- T. Chanwattana et al., “Upgrades of beam diagnostics for linac of Siam Photon Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM028, pp. 1046-1049.
- P. Arcioni, K. Ko, and R. P. Pendleton, “Numerical Evaluation of Beam Coupling Impedances in Heavily Damped Accelerating Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 907-910.
- D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
- Yu. N. Denisov, “Cyclotrons of the JINR Laboratory of Nuclear Problems (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-07, pp. 62-67.
- Yu. N. Denisov and V. N. Anosov, “Automatic Parameter Measuring Systems and Control Systems for Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-10, pp. 617-620.
- D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 192-195.
- V. Roger, S. K. Chandrasekaran, and D. Passarelli, “Design Strategy of the PIP-II Cryomodules”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 307-310.
- B. Baklakov et al., “Ground Motion Measurements for Fermilab Future Collider Projects”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA133, pp. 1387-1389.
- D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 78-81.
- M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 258-260.
Back to search