Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. W. Baumhoff, F. P. Brady, G. A. Carlson, J. A. Jungerman, and J. A. McCray, “Orbit Studies for a 72 - Inch Cyclotron with Large Spiral Angle”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E01, pp. XX-XX.
[n] Z. Duan, J. S. Hummelt, M. A. Shapiro, and R. J. Temkin, “Retrieval of Effective Parameters of Metamaterials for Accelerator and Vacuum Electron Device Applications”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA13, pp. 910-912.
[n] S. I. Bibko et al., “50 MeV Superconducting Electron Linear Accelerator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91B03, pp. XX-XX.
[n] D. Reggiani, T. Reiss, M. Seidel, V. Talanov, and M. Wohlmuther, “Simulation of a Beam Rotation System for the SINQ Spallation Source at PSI”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO083, pp. 3954-3956.
[n] T. Sieber, H. Fadil, M. Grieser, A. Wolf, and R. von Hahn, “Beam Diagnostics Development for the Cryogenic Storage Ring CSR”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB23, pp. 283-285.
[n] T. Sieber et al., “Intensity and Profile Measurement for Low Intensity Ion Beams in an Electrostatic Cryogenic Storage Ring”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOA02, pp. 418-420.
[n] J. A. Doyle et al., “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2815-2817. doi:10.18429/JACoW-IPAC2017-WEPAB099
[n] Y. Otake et al., “Development of the Optical Timing and RF Distribution System for XFEL/SPring-8”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH046, pp. 352-355.
[n] K. Floettmann, “Lattice Studies for a Large Dog-bone Damping Ring for TESLA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 509-512.
[n] A. Neumann et al., “Final Design for the BERLinPro Main Linac Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP070, pp. 217-220.
[n] S. P. M?©ller et al., “A Novel Proton and Light Ion Synchrotron for Particle Therapy”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH160, pp. 2305-2307.
[n] R. Ianconescu, A. Gover, E. Hemsing, A. Marinelli, and A. Nause, “Sub-Radiance and Enhanced-Radiance of Undulator Radiation from a Correlated Electron Beam”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 221-226. doi:10.18429/JACoW-FEL2015-MOP078
For LaTeX
Use Complete Form
For BibTeX
References
- L. W. Baumhoff, F. P. Brady, G. A. Carlson, J. A. Jungerman, and J. A. McCray, “Orbit Studies for a 72 - Inch Cyclotron with Large Spiral Angle”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E01, pp. XX-XX.
- Z. Duan, J. S. Hummelt, M. A. Shapiro, and R. J. Temkin, “Retrieval of Effective Parameters of Metamaterials for Accelerator and Vacuum Electron Device Applications”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA13, pp. 910-912.
- S. I. Bibko et al., “50 MeV Superconducting Electron Linear Accelerator”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91B03, pp. XX-XX.
- D. Reggiani, T. Reiss, M. Seidel, V. Talanov, and M. Wohlmuther, “Simulation of a Beam Rotation System for the SINQ Spallation Source at PSI”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO083, pp. 3954-3956.
- T. Sieber, H. Fadil, M. Grieser, A. Wolf, and R. von Hahn, “Beam Diagnostics Development for the Cryogenic Storage Ring CSR”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB23, pp. 283-285.
- T. Sieber et al., “Intensity and Profile Measurement for Low Intensity Ion Beams in an Electrostatic Cryogenic Storage Ring”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper WEOA02, pp. 418-420.
- J. A. Doyle et al., “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2815-2817.
- Y. Otake et al., “Development of the Optical Timing and RF Distribution System for XFEL/SPring-8”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH046, pp. 352-355.
- K. Floettmann, “Lattice Studies for a Large Dog-bone Damping Ring for TESLA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 509-512.
- A. Neumann et al., “Final Design for the BERLinPro Main Linac Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP070, pp. 217-220.
- S. P. M?©ller et al., “A Novel Proton and Light Ion Synchrotron for Particle Therapy”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH160, pp. 2305-2307.
- R. Ianconescu, A. Gover, E. Hemsing, A. Marinelli, and A. Nause, “Sub-Radiance and Enhanced-Radiance of Undulator Radiation from a Correlated Electron Beam”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 221-226.
Back to search