Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. P. Kobets et al., “Development of Investigations on the MILAC Heavy Ion Linear Accelerator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP050, pp. 187-189.
[n] A. Molodojentsev, “Transverse Emittance Blow-up in Compact Proton Synchrotrons Caused by the Space-Charge Effects”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH062, pp. 2991-2993.
[n] G. V. Dolbilov et al., “Compact Infrared FEL for Scientific Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B11, pp. 744-745.
[n] M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3032-3035. doi:10.18429/JACoW-IPAC2018-THPAF034
[n] A. Xiao and L. Emery, “International Linear Collider Damping Ring Lattice Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN097, pp. 3450-3452.
[n] T. Batten, “Invitation to IBIC2023”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper THCI1, unpublished.
[n] D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478.
[n] K. Shinto et al., “CURRENT STATUS OF A STRETCHER-BOOSTER RING AT TOHOKU UNIVERSITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP002, pp. XX-XX.
[n] F. M. Alrumayan, M. S. Shawoo, and M. Vora, “Status Report of the Cyclotrons C-30, CS-30 and RDS-111 at KFSHRC, Saudi Arabia”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT001, pp. 28-30.
[n] C. Rodrigues, G. O. Brunheira, B. E. Limeira, and G. M. Rogatto, “Design and Experimental Results of a 1.1kA/800V AC Power Supply for Sirius Booster Dipoles”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1227-1229. doi:10.18429/JACoW-IPAC2019-TUPMP001
[n] W. Manwaring, “Ramping Controls for the IUCF Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1258-1261.
[n] R. Schnuerer, C. P. Welsch, J. S. L. Yap, H. D. Zhang, O. Girard, and G. J. Haefeli, “Implementation of a Non-Invasive Online Beam Monitor at a 60 MeV Proton Therapy Beamline”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 449-452. doi:10.18429/JACoW-IPAC2018-MOPML024
[n] S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX.
[n] V. M. Skorkin, S. V. Akulinichev, and A. V. Andreev, “The High-Current Deuteron Accelerator for the Neutron Therapy”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper FRCHX01, pp. 399-401.
[n] R. Noble, “Beam Transport with Magnetic Solenoids and Plasma Lenses”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-51, pp. 173-175.
[n] M. Canzari et al., “Improving Performance of Taranta: Analysis of Memory Requests and Implementation of the Solution”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 617-621. doi:10.18429/JACoW-ICALEPCS2023-TUPDP044
[n] R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n] I. Roth, M. P. J. Gaudreau, M. K. Kempkes, J. Domenge, and J. L. Lancelot, “Pulsed Power Systems for ESS Klystrons”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3634-3636. doi:10.18429/JACoW-IPAC2016-THPMW037
[n] H. S. Butler, Z. Li, and H. A. Thiessen, “Using MOTER to Design PILAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 281-284.
[n] R. C. Gupta, G. H. Morgan, and P. A. Thompson, “A Single Layer Coil Superconducting Magnet for SSC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1413-1416.
[n] J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
[n] H. N. Jungwirth, R. L. Kustom, S. Martin, P. F. Meads, E. Zaplatine, and K. Ziegler, “Design of Fixed Field Alternating Gradient Cyclotrons - FFAG - as Accelerators for Intense Pulsed Proton Beams”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-08, pp. 625-628.
[n] A. I. Govorov, “Upgrades of the Nuclotron Injector for Acceleration of Ions with Z/A=0.28”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP13, pp. 352-354.
[n] C. Rodrigues and A. R. Silva, “Active Shunts for the LNLS Storage Ring Quadrupoles”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN002, pp. 143-145.
[n] Y. Zou and M. Olveg?Ñrd, “Studies on Beam Collimation System for the ESSnuSB Accumulator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4107-4110. doi:10.18429/JACoW-IPAC2021-THPAB176
[n] A. Salom et al., “Latest Development of the ALBA DLLRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4034-4036. doi:10.18429/JACoW-IPAC2017-THPAB134
[n] C. G. Dols and R. A. Kilpatrick, “Synchrotron - Magnet Cost Studies”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 354-359.
[n] K. Klys, W. Cichalewski, and P. Pierini, “EPICS Based Tool for LLRF Operation Support and Testing”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 432-436. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO30
[n] F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
For LaTeX
Use Complete Form
For BibTeX
References
- A. P. Kobets et al., “Development of Investigations on the MILAC Heavy Ion Linear Accelerator”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP050, pp. 187-189.
- A. Molodojentsev, “Transverse Emittance Blow-up in Compact Proton Synchrotrons Caused by the Space-Charge Effects”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH062, pp. 2991-2993.
- G. V. Dolbilov et al., “Compact Infrared FEL for Scientific Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B11, pp. 744-745.
- M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3032-3035.
- A. Xiao and L. Emery, “International Linear Collider Damping Ring Lattice Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN097, pp. 3450-3452.
- T. Batten, “Invitation to IBIC2023”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper THCI1, unpublished.
- D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478.
- K. Shinto et al., “CURRENT STATUS OF A STRETCHER-BOOSTER RING AT TOHOKU UNIVERSITY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP002, pp. XX-XX.
- F. M. Alrumayan, M. S. Shawoo, and M. Vora, “Status Report of the Cyclotrons C-30, CS-30 and RDS-111 at KFSHRC, Saudi Arabia”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT001, pp. 28-30.
- C. Rodrigues, G. O. Brunheira, B. E. Limeira, and G. M. Rogatto, “Design and Experimental Results of a 1.1kA/800V AC Power Supply for Sirius Booster Dipoles”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1227-1229.
- W. Manwaring, “Ramping Controls for the IUCF Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1258-1261.
- R. Schnuerer, C. P. Welsch, J. S. L. Yap, H. D. Zhang, O. Girard, and G. J. Haefeli, “Implementation of a Non-Invasive Online Beam Monitor at a 60 MeV Proton Therapy Beamline”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 449-452.
- S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX.
- V. M. Skorkin, S. V. Akulinichev, and A. V. Andreev, “The High-Current Deuteron Accelerator for the Neutron Therapy”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper FRCHX01, pp. 399-401.
- R. Noble, “Beam Transport with Magnetic Solenoids and Plasma Lenses”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-51, pp. 173-175.
- M. Canzari et al., “Improving Performance of Taranta: Analysis of Memory Requests and Implementation of the Solution”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP044, pp. 617-621.
- R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2818-2821.
- I. Roth, M. P. J. Gaudreau, M. K. Kempkes, J. Domenge, and J. L. Lancelot, “Pulsed Power Systems for ESS Klystrons”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3634-3636.
- H. S. Butler, Z. Li, and H. A. Thiessen, “Using MOTER to Design PILAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 281-284.
- R. C. Gupta, G. H. Morgan, and P. A. Thompson, “A Single Layer Coil Superconducting Magnet for SSC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1413-1416.
- J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
- H. N. Jungwirth, R. L. Kustom, S. Martin, P. F. Meads, E. Zaplatine, and K. Ziegler, “Design of Fixed Field Alternating Gradient Cyclotrons - FFAG - as Accelerators for Intense Pulsed Proton Beams”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-08, pp. 625-628.
- A. I. Govorov, “Upgrades of the Nuclotron Injector for Acceleration of Ions with Z/A=0.28”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP13, pp. 352-354.
- C. Rodrigues and A. R. Silva, “Active Shunts for the LNLS Storage Ring Quadrupoles”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN002, pp. 143-145.
- Y. Zou and M. Olveg?Ñrd, “Studies on Beam Collimation System for the ESSnuSB Accumulator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4107-4110.
- A. Salom et al., “Latest Development of the ALBA DLLRF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4034-4036.
- C. G. Dols and R. A. Kilpatrick, “Synchrotron - Magnet Cost Studies”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 354-359.
- K. Klys, W. Cichalewski, and P. Pierini, “EPICS Based Tool for LLRF Operation Support and Testing”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUMBCMO30, pp. 432-436.
- F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
Back to search