JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	P. Bertrand and Ch. Ricaud, “Specific Cyclotron Correlations Under Space Charge Effects in the Case of a Spherical Beam”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-3, pp. XX-XX. 
[n]	D. Boutin et al., “Residual Orbit Correction Studies for the FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3332-3334. doi:10.18429/JACoW-IPAC2016-THPMB042
[n]	W. Chou, “Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A3, pp. 95-98. 
[n]	U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776. 
[n]	X. Sun and G. Decker, “Low-Frequency Time Domain Numerical Studies of Transition Radiation in a Cylindrical Waveguide”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP078, pp. 3383-3385. 
[n]	C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n]	S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898. 
[n]	G. Fiorentini, C. Pagani, and L. Serafini, “Asymmetric Emittance Beam Generation Using Round Beam RF Guns and Non-linear Optics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB10, pp. 973-975. 
[n]	S. Levenson et al., “Chemical robustness enhancement of negative electron affinity photocathodes through cesium-iodide deposition”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 646-649. doi:10.18429/JACoW-IPAC2024-MOPR82
[n]	G. Jackson and G. W. Foster, “Storage Ring for Enhanced Antiproton Production at Fermilab”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP16, pp. 473-475. 
[n]	G. Ferrini et al., “Cs2Te Photocathode for the TTF Injector II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP068L, pp. 1510-1512. 
[n]	J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1027-1030. 
[n]	K. W. Smolenski, B. M. Dunham, D. L. Barth, M. Muehlbauer, S. Wacker, and J. M. Maxson, “Successful Laboratory-Industrial Partnerships: the Cornell-Friatec Segmented Insulator for High Voltage DC Photocathode Guns”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 405-407. doi:10.18429/JACoW-NAPAC2016-TUPOA59
[n]	O. Engels, H. Homeyer, W. Pelzer, and A. Schempp, “RF Properties of the VE-RFQ Injector for the ISL Cyclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP063G, pp. 771-773. 
[n]	C. Bieth et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 431-434. 
[n]	A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2015-THHD3O08
[n]	M. Veronese et al., “Longitudinal Electron Beam Diagnostics for the FERMI@Elettra FEL”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper THAP02, pp. 259-263. 
[n]	C. A. Thomas, G. Rehm, F. Ewald, and J. W. Flanagan, “Large Aperture X-ray Monitors for Beam Profile Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEAL1, pp. 608-614. 
[n]	C. Bieth, B. Ducoudret, G. Dugay, A. Joubert, F. Labussi?¿re, and S. Kwiatkowski, “GANIL RF Systems: Cavities, Transmitters and Coupling System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-09, pp. 403-405. 
[n]	A. Chabert, “Status Report on GANIL”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97. 
[n]	J. Strait et al., “Full Length SSC  R&D Dipole Magnet Test Results”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 530-533. 
[n]	R. D. Porter, N. Banerjee, and M. Liepe, “Dynamics of RF Dissipation Probed via High-Speed Temperature Mapping”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 349. doi:10.18429/JACoW-SRF2021-TUOFDV05
[n]	G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 667-668. doi:10.18429/JACoW-ICALEPCS2015-WEM304
[n]	Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4342-4344. doi:10.18429/JACoW-IPAC2018-THPMK020
[n]	S. Rugmai, P. Klysubun, C. Kwankasem, and P. Sudmuang, “Beam Based Alignment and COD Correction for the Siam Photon Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA020, pp. 130-132. 
[n]	A. Joubert, “Invited Paper: Status Report on the GANIL Facility”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper A02, pp. 3-10. 
[n]	A. G. Valentinov et al., “New Superconducting Wigglers for KSRS”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 407-409. doi:10.18429/JACoW-RUPAC2018-THPSC04
[n]	R. D. Porter, N. Banerjee, and M. Liepe, “Dynamic Temperature Mapping of Nb3Sn Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 6. doi:10.18429/JACoW-SRF2021-SUPCAV003
[n]	D. Wang et al., “The CEPC lattice design with combined dipole magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 315-318. doi:10.18429/JACoW-IPAC2018-MOPMF079
[n]	W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 92-98. doi:10.18429/JACoW-ICALEPCS2017-MODPL02
[n]	P. Thompson et al., “Mechanical Properties of ISABELLE Superconducting Coils”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3303-3306. 
[n]	W. Chou, “Summary: Joint Session of Other Technologies and Energy Efficiency”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 231-233. doi:10.18429/JACoW-eeFACT2016-THS2H6
[n]	G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 111-113. doi:10.18429/JACoW-ECRIS2016-WEPP18

For LaTeX

Use Complete Form

For BibTeX

References

Back to search