Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Winick et al., “An All Wiggler and Undulator Synchrotron Radiation Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3097-3100.
[n] F. Caspers et al., “Design of A Chopper Line for The CERN SPL”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO416, pp. 76-78.
[n] F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
[n] C. Johnstone, “A new center for heavy ion research”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5036-5038. doi:10.18429/JACoW-IPAC2023-THPM061
[n] H. Blosser, “30 YEARS OF SUPERCONDUCTING CYCLOTRON TECHNOLOGY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 22B1, pp. XX-XX.
[n] S. Thielk, R. Agustsson, P. Carriere, and S. Kutsaev, “Evaluation of low-loss alumina material for high-power RF windows”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4373-4376. doi:10.18429/JACoW-IPAC2023-THPA174
[n] J. Kamiya et al., “Commissioning Results of the Kicker Magnet in J-PARC RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP097, pp. 3590-3592.
[n] V. I. Beloglasov, G. L. Fursov, G. D. Kramskoj, E. S. Zlunitsyn, and A. I. Zykov, “An Electron Linac producing Beam Power up to 15 kW”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP090G, pp. 798-800.
[n] M. Choi, J. D. Gonczy, J. W. Howell, and R. C. Niemann, “ANL Advanced Photon Source Crotch Absorber Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2301-2304.
[n] C. Dickerson, S. A. Kondrashev, P. N. Ostroumov, R. C. Vondrasek, and A. Perry, “Offline Testing of the CARIBU EBIS Charge Breeder”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3973-3975. doi:10.18429/JACoW-IPAC2015-THPF110
[n] K. Shibata, T. Kageyama, and Y. Suetsugu, “Development of Movable Mask with Reduced-HOM Design for KEKB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE027, pp. 800-802.
[n] G. R. Lambertson, A. F. Jacob, R. A. Rimmer, and F. Voelker, “Techniques for Beam Impedance Measurements Above Cutoff”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1049-1052.
[n] M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661.
[n] M. Billing, “Controls in Use at CESR for Adjusting Horizontal to Vertical Coupling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2246-2249.
[n] H. D. de Almeida, D. P. Magalhaes, M. A. L. Moraes, and J. M. Polli, “The Back-End Computer System for the Medipix Based PI-MEGA X-Ray Camera”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1149-1151. doi:10.18429/JACoW-ICALEPCS2017-THBPA03
For LaTeX
Use Complete Form
For BibTeX
References
- H. Winick et al., “An All Wiggler and Undulator Synchrotron Radiation Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3097-3100.
- F. Caspers et al., “Design of A Chopper Line for The CERN SPL”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO416, pp. 76-78.
- F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
- C. Johnstone, “A new center for heavy ion research”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM061, pp. 5036-5038.
- H. Blosser, “30 YEARS OF SUPERCONDUCTING CYCLOTRON TECHNOLOGY”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 22B1, pp. XX-XX.
- S. Thielk, R. Agustsson, P. Carriere, and S. Kutsaev, “Evaluation of low-loss alumina material for high-power RF windows”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA174, pp. 4373-4376.
- J. Kamiya et al., “Commissioning Results of the Kicker Magnet in J-PARC RCS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP097, pp. 3590-3592.
- V. I. Beloglasov, G. L. Fursov, G. D. Kramskoj, E. S. Zlunitsyn, and A. I. Zykov, “An Electron Linac producing Beam Power up to 15 kW”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP090G, pp. 798-800.
- M. Choi, J. D. Gonczy, J. W. Howell, and R. C. Niemann, “ANL Advanced Photon Source Crotch Absorber Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2301-2304.
- C. Dickerson, S. A. Kondrashev, P. N. Ostroumov, R. C. Vondrasek, and A. Perry, “Offline Testing of the CARIBU EBIS Charge Breeder”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3973-3975.
- K. Shibata, T. Kageyama, and Y. Suetsugu, “Development of Movable Mask with Reduced-HOM Design for KEKB”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE027, pp. 800-802.
- G. R. Lambertson, A. F. Jacob, R. A. Rimmer, and F. Voelker, “Techniques for Beam Impedance Measurements Above Cutoff”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1049-1052.
- M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661.
- M. Billing, “Controls in Use at CESR for Adjusting Horizontal to Vertical Coupling”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2246-2249.
- H. D. de Almeida, D. P. Magalhaes, M. A. L. Moraes, and J. M. Polli, “The Back-End Computer System for the Medipix Based PI-MEGA X-Ray Camera”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1149-1151.
Back to search