Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Capshew, J. C. Collins, D. DuPlantis, D. W. Frame, J. Graham, and D. D. Reid, “The IUCF High Intensity Polarized Ion Source Control System”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-02, pp. 641-643.
[n] S. Joly et al., “Progress Report on the BRC Photo-injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 140-143.
[n] K. Eppley, “The Use of Electromagnetic Particle-in-Cell Codes in Accelerator Applications”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE1-02, pp. 267-272.
[n] P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
[n] K. R. Crandall, R. A. Jameson, D. Morris, and D. Swenson, “The dt Turn-On Procedure”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper F01, pp. 122-125.
[n] K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514.
[n] L. O. Dallin and M. S. de Jong, “Coherent Synchrotron Radiation Production at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP017, pp. 1126-1128.
[n] A. Harvey, F. P. Blackstein, A. J. Otter, and W. A. Wolfe, “Accelerator Magnet Development at CRNL”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper A-4, pp. 41-51.
[n] C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995.
[n] H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
[n] A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 251-254. doi:10.18429/JACoW-ICALEPCS2015-MOPGF070
[n] J. J. Pon, E. Klassen, K. S. Lee, M. M. Mouat, T. Tateyama, and P. J. Yogendran, “Early Control System Applications Using PDAs at TRIUMF”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP510, pp. XX-XX.
[n] J. L. Conradie et al., “Improvements To The Ithemba Labs Cyclotron Facilities”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 140-142.
[n] S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
[n] G. F. Burdzik et al., “Decentralization of the NAC Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-05, pp. 422-425.
[n] E. Lecorche et al., “The Spiral2 Control System Progress Towards the Commission Phase”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOAAB03, pp. 8-11.
[n] K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
[n] E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
[n] F. Lin et al., “Overview of (Some) Computational Approaches in Spin Studies”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IOPK04, pp. 18-22.
[n] U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 173-176.
[n] T. Fujino et al., “Promising Performance of the Nb/Cu Clad Seamless Superconducting RF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP002, pp. 372-375.
[n] G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861.
[n] B. X. Yang, S. H. Lee, J. W. Morgan, and H. Shang, “High-Energy X-Ray Pinhole Camera for High-Resolution Electron Beam Size Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 504-507. doi:10.18429/JACoW-IBIC2016-TUPG66
[n] I. R. Bailey et al., “A Prototype Target Wheel for the ILC Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP069, pp. 706-708.
[n] J. W. Wang et al., “Positron Injector Accelerator and RF System for the ILC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA109, pp. 473-475.
[n] C. W. Park, D. H. An, and H. Yim, “Beam Tracking on the High Energy Beam Transport Line in KHIMA Medical Machine”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3302-3304. doi:10.18429/JACoW-IPAC2016-THPMB033
[n] A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
[n] H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
[n] S. H. Nam, J. H. Suh, K. M. Ha, J. Y. Huang, and I. S. Ko, “High Current Shunt Regulator for Quadrupole Magnets in PLS 2-GeV Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P013, pp. 3479-3481.
[n] D. J. Scott, D. Capista, I. Kourbanis, K. Seiya, and M.-J. Yang, “Coalescing at 8 GeV in the Fermilab Main Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP022, pp. 3779-3781.
[n] J. Marroncle et al., “IFMIF-LIPAc Diagnostics and its Challenges”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper WECC01, pp. 557-565.
[n] K. M. Ha et al., “PLS Fully Digital Controlled Corrector Power Supplies”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_045.
[n] J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 411-414.
[n] S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB05, pp. 819-821.
[n] J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
[n] P. Bauer et al., “Advances in the Understanding and Operations of Superconducting Colliders”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA001, pp. 54-58.
[n] A. I. Wawrzyniak et al., “Solaris Project Progress”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA046, pp. 181-183.
[n] H. K. Yue et al., “Analysis and Design of Matching Unit for a RF Driven Plasma Source for Fusion Purpose”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI047, pp. 389-391.
[n] J. P. Girardeau-Montaut et al., “Preliminary Results of ADELE (*) Experiment”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 700-703.
[n] B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1858-1860. doi:10.18429/JACoW-IPAC2017-TUPIK070
[n] F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n] J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2948-2951. doi:10.18429/JACoW-IPAC2015-WEPMN014
[n] K. R. Crandall and D. P. Rusthoi, “TRACE: An Interactive Beam Transport Code”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0017, pp. 371-373.
[n] S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644.
[n] L. Walling, D. Neuffer, and G. Spalek, “Transmission-Line Impedance Measurements of Beam Pipes for an Advanced Hadron Faciliity”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1164-1167.
[n] O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4114-4117. doi:10.18429/JACoW-IPAC2017-THPIK005
For LaTeX
Use Complete Form
For BibTeX
References
- T. Capshew, J. C. Collins, D. DuPlantis, D. W. Frame, J. Graham, and D. D. Reid, “The IUCF High Intensity Polarized Ion Source Control System”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-02, pp. 641-643.
- S. Joly et al., “Progress Report on the BRC Photo-injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 140-143.
- K. Eppley, “The Use of Electromagnetic Particle-in-Cell Codes in Accelerator Applications”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE1-02, pp. 267-272.
- P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
- K. R. Crandall, R. A. Jameson, D. Morris, and D. Swenson, “The dt Turn-On Procedure”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper F01, pp. 122-125.
- K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514.
- L. O. Dallin and M. S. de Jong, “Coherent Synchrotron Radiation Production at the Canadian Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP017, pp. 1126-1128.
- A. Harvey, F. P. Blackstein, A. J. Otter, and W. A. Wolfe, “Accelerator Magnet Development at CRNL”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper A-4, pp. 41-51.
- C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995.
- H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
- A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 251-254.
- J. J. Pon, E. Klassen, K. S. Lee, M. M. Mouat, T. Tateyama, and P. J. Yogendran, “Early Control System Applications Using PDAs at TRIUMF”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP510, pp. XX-XX.
- J. L. Conradie et al., “Improvements To The Ithemba Labs Cyclotron Facilities”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 140-142.
- S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
- G. F. Burdzik et al., “Decentralization of the NAC Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-05, pp. 422-425.
- E. Lecorche et al., “The Spiral2 Control System Progress Towards the Commission Phase”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOAAB03, pp. 8-11.
- K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
- E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
- F. Lin et al., “Overview of (Some) Computational Approaches in Spin Studies”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IOPK04, pp. 18-22.
- U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 173-176.
- T. Fujino et al., “Promising Performance of the Nb/Cu Clad Seamless Superconducting RF Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP002, pp. 372-375.
- G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861.
- B. X. Yang, S. H. Lee, J. W. Morgan, and H. Shang, “High-Energy X-Ray Pinhole Camera for High-Resolution Electron Beam Size Measurements”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 504-507.
- I. R. Bailey et al., “A Prototype Target Wheel for the ILC Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP069, pp. 706-708.
- J. W. Wang et al., “Positron Injector Accelerator and RF System for the ILC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA109, pp. 473-475.
- C. W. Park, D. H. An, and H. Yim, “Beam Tracking on the High Energy Beam Transport Line in KHIMA Medical Machine”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3302-3304.
- A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
- H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
- S. H. Nam, J. H. Suh, K. M. Ha, J. Y. Huang, and I. S. Ko, “High Current Shunt Regulator for Quadrupole Magnets in PLS 2-GeV Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P013, pp. 3479-3481.
- D. J. Scott, D. Capista, I. Kourbanis, K. Seiya, and M.-J. Yang, “Coalescing at 8 GeV in the Fermilab Main Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP022, pp. 3779-3781.
- J. Marroncle et al., “IFMIF-LIPAc Diagnostics and its Challenges”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper WECC01, pp. 557-565.
- K. M. Ha et al., “PLS Fully Digital Controlled Corrector Power Supplies”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_045.
- J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 411-414.
- S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB05, pp. 819-821.
- J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
- P. Bauer et al., “Advances in the Understanding and Operations of Superconducting Colliders”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA001, pp. 54-58.
- A. I. Wawrzyniak et al., “Solaris Project Progress”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA046, pp. 181-183.
- H. K. Yue et al., “Analysis and Design of Matching Unit for a RF Driven Plasma Source for Fusion Purpose”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI047, pp. 389-391.
- J. P. Girardeau-Montaut et al., “Preliminary Results of ADELE (*) Experiment”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 700-703.
- B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1858-1860.
- F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL169, pp. 2143-2146.
- J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2948-2951.
- K. R. Crandall and D. P. Rusthoi, “TRACE: An Interactive Beam Transport Code”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0017, pp. 371-373.
- S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644.
- L. Walling, D. Neuffer, and G. Spalek, “Transmission-Line Impedance Measurements of Beam Pipes for an Advanced Hadron Faciliity”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1164-1167.
- O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4114-4117.
Back to search