Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Furuta et al., “Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 492-495. doi:10.18429/JACoW-LINAC2016-TUPLR011
[n] K. G. Sonnad, K. R. Butler, G. Dugan, M. A. Palmer, and M. T. F. Pivi, “Simulations of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP109, pp. 1683-1685.
[n] O. Stein et al., “Identification and Analysis of Prompt Dose Maxima in the Insertion Regions IR1 and IR5 of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2078-2080. doi:10.18429/JACoW-IPAC2017-TUPVA016
[n] D. Yu. Sergeeva, M. N. Strikhanov, and A. A. Tishchenko, “Incoherent and Coherent Polarization Radiation as Instrument of the Transversal Beam Size Diagnostics”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 792-794. doi:10.18429/JACoW-IBIC2016-WEPG62
[n] Y. Roblin, V. S. Morozov, B. Terzic, M. Aturban, D. Ranjan, and M. Zubair, “GPU-optimized Code for Long-term Simulations of Beam-beam Effects in Colliders”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO080, pp. 1064-1066.
[n] A. N. Chernykh, M. S. Bulatov, V. S. Khoroshkov, and G. I. Klenov, “Preliminary Design Study of the Gantry for the Proton Radiotherapy Center NRC Kurchatov Institute""”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 196-198. doi:10.18429/JACoW-RuPAC2021-MOPSA46
[n] J.-L. Fernandez-Hernando, S. Molloy, J. D. A. Smith, and N. K. Watson, “Measurements of Collimator Wakefields at End Station A”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP163, pp. 2868-2870.
[n] R. T. Dowd, G. LeBlanc, and K. Zingre, “Linac Waveguide Upgrade at the Australian Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC001, pp. 62-64.
[n] M. Checchin, A. Grassellino, M. Martinello, O. S. Melnychuk, A. Romanenko, and D. A. Sergatskov, “Origin of Trapped Flux Caused by Quench in Superconducting Niobium Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3309-3311. doi:10.18429/JACoW-IPAC2015-WEPTY021
[n] T. Lensch and S. Liu, “Status and Commissioning of the Wire Scanner System for the European XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1919-1922. doi:10.18429/JACoW-IPAC2018-WEPAF047
[n] T. Khabiboulline et al., “Recent Results of Testing 3-cell 3.9 GHz Accelerating Cavity at Fermilab”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP14, pp. 267-267.
[n] W. Anders, “Bunch Length Measurements at the BESSY Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 798-801.
[n] G. Franzini et al., “Analysis and Correction of Geometrical Non-Linearities of ELI-NP BPMs on Position and Current Measurements”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 235-237. doi:10.18429/JACoW-IPAC2017-MOPAB057
[n] C. Mitsuda et al., “The Construction Status of Beam Transport Line from XFEL-linac to SPring-8 Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC144, pp. 3224-3226.
[n] F. Furuta et al., “HOM Measurements for Cornell's ERL Main Linac Cryomodule”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 496-499. doi:10.18429/JACoW-LINAC2016-TUPLR012
[n] K. E. Robinson, S. C. Gottschalk, F. E. James, D. C. Quimby, J. M. Slater, and A. S. Valla, “Developement of a 10-m Wedged-Pole Undulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 783-786.
[n] S. Fukumoto and S. Takano, “KEK Preinjector Accelerating Column”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D02, pp. 189-192.
[n] T. L. Buller, T. D. Hayward, D. R. Smith, V. S. Starkovich, and A. M. Vetter, “Design of the APLE Accelerator Cavity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-30, pp. 689-691.
[n] H. Tanaka et al., “Operation Status of the SCSS Test Accelerator: Continuous Saturation of SASE FEL at the Wavelength Range from 50 to 60 nanometers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOAM01, pp. 1944-1946.
[n] E. V. Gorbachev et al., “Nuclotron and NICA Control System Development Status”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 437-440. doi:10.18429/JACoW-ICALEPCS2015-MOPGF149
[n] M. Shuptar et al., “Mechanical Design of the Cryogenic Sub-Systems for ReA6 Quarter Wave Resonator Cryomodule”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA13, pp. 1256-1258.
[n] B. Podobedov, W. X. Cheng, Y. Hidaka, H.-C. Hseuh, and G. M. Wang, “NSLS-II Beam Lifetime Measurements and Modeling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 416-418. doi:10.18429/JACoW-IPAC2015-MOPJE053
[n] M. D. McCaughan, J. F. Benesch, Y. Roblin, and T. Satogata, “First e-/Photon Commissioning Results for the GlueX Experiment/Hall D at CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1916-1919. doi:10.18429/JACoW-IPAC2015-TUPMA036
[n] W. Weingarten and R. G. Eichhorn, “Field-Dependent Surface Resistance for Superconducting Niobium Accelerating Cavities: The Case of N-Doping”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB010, pp. 95-99.
[n] K. Ko, Z. Li, and S. Tantawi, “Mode Launcher Design for the Multi-moded DLDS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP27F, pp. 1900-1902.
[n] P. Cameron et al., “Tune, Coupling, and Chromaticity Measurement and Feedback During RHIC Run 7”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC10, pp. 331-333.
[n] G. A. Loew, R. H. Miller, and C. K. Sinclair, “The SLAC Low Emittance Accelerator Test Facility”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-43, pp. 144-147.
[n] C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
[n] P. Belochitskii, “Status of the Antiproton Decelerator and of the ELENA Project at CERN”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOM1I02, pp. 6-10.
[n] V. P. Golubev, G. A. Nalivaiko, S. G. Tsepakin, and D. V. Efremov, “The Source of Negative Ions”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P10, pp. 356-357.
[n] A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3837-3839. doi:10.18429/JACoW-IPAC2017-THPAB055
[n] H. von der Schmitt and H. Aufhaus, “A Modular System for the Control of Complex Accelerators Using Portable Software”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H06, pp. 274-276.
[n] Y. Xu et al., “Integrated Thermal Analysis of the FRIB Cryomodule Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD007, pp. 2510-2512.
[n] A. Aleksandrov, “Commissioning of the Spallation Neutron Source front End Systems”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPB002, pp. 65-69.
[n] E. V. Gorbachev and G. S. Sedykh, “Development of NICA Control System: Access Control and Logging”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 822-825. doi:10.18429/JACoW-ICALEPCS2017-TUPHA171
[n] C. Mitsuda et al., “Suppression of Stored Beam Oscillation at Injection by Fast Kicker in the SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 280-282. doi:10.18429/JACoW-IPAC2014-MOPRO082
[n] G. Franzini et al., “Measurements with the ELI-NP Cavity Beam Position Monitor Read-out Electronics at FLASH”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2169-2172. doi:10.18429/JACoW-IPAC2018-WEPAL012
[n] I. R. R. Shinton and R. M. Jones, “Large Scale Linac Simulations Using a Globalised Scattering Matrix Approach”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP034, pp. 619-621.
[n] S. A. Belomestnykh, V. D. Shemelin, K. W. Smolenski, and V. Veshcherevich, “Deflecting Cavity for Beam Diagnostics in ERL Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS004, pp. 2331-2333.
[n] A. Facco, C. Compton, J. Popielarski, and G. J. Velianoff, “Virtual Welding as a Tool for Superconducting Cavity Coarse Tuning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3412-3414. doi:10.18429/JACoW-IPAC2015-WEPTY060
[n] P. Wise et al., “Mechanical Engineering for the Front End Test Stand”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP041, pp. 448-450.
[n] S. Russenschuck et al., “Challenges for the Magnet System of LHeC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR075, pp. 1996-1998.
[n] K. L. F. Bane, C. K. Ng, and F. Zimmermann, “Collimator Wake Fields in the SLC Final Focus”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP099G, pp. 504-506.
[n] I. V. Bazarov et al., “Initial Beam Results from the Cornell High-Current ERL Injector Prototype”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU2GRI01, pp. 683-687.
[n] T. K. Charles et al., “Comparison of Bunch Compression Schemes for the AXXS FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1399-1402. doi:10.18429/JACoW-IPAC2015-TUPWA005
[n] V. Litvinenko, Y. C. Jing, I. Pinayev, G. Wang, D. F. Ratner, and V. Samulyak, “Testing Aspects of Advanced Coherent Electron Cooling Technique”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 445-448. doi:10.18429/JACoW-IPAC2015-MOPJE062
[n] M. Berz, K. Joh, J. A. Nolen, B. M. Sherrill, and A. F. Zeller, “On-Line Correction of Aberrations in Particle Spectrographs”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 884-887.
[n] K. G. Simonov, A. A. Borisov, I. I. Golenitskiy, A. V. Mamontov, A. N. Yunakov, and O. A. Morozov, “Principles for Design of High Power Pulsed Microwave Devices and Devices with Low Operating Voltage for Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2273-2275. doi:10.18429/JACoW-IPAC2014-WEPME009
[n] R. Kuroda et al., “Beam Diagnostics for Laser Undulator Based on Compton Backward Scattering”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP053, pp. XX-XX.
[n] A. I. Iliev and V. Senichev, “Racetrack Lattices for Low-medium-energy Synchrotrons”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1904-1907.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Furuta et al., “Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 492-495.
- K. G. Sonnad, K. R. Butler, G. Dugan, M. A. Palmer, and M. T. F. Pivi, “Simulations of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP109, pp. 1683-1685.
- O. Stein et al., “Identification and Analysis of Prompt Dose Maxima in the Insertion Regions IR1 and IR5 of the Large Hadron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2078-2080.
- D. Yu. Sergeeva, M. N. Strikhanov, and A. A. Tishchenko, “Incoherent and Coherent Polarization Radiation as Instrument of the Transversal Beam Size Diagnostics”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 792-794.
- Y. Roblin, V. S. Morozov, B. Terzic, M. Aturban, D. Ranjan, and M. Zubair, “GPU-optimized Code for Long-term Simulations of Beam-beam Effects in Colliders”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO080, pp. 1064-1066.
- A. N. Chernykh, M. S. Bulatov, V. S. Khoroshkov, and G. I. Klenov, “Preliminary Design Study of the Gantry for the Proton Radiotherapy Center NRC Kurchatov Institute""”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 196-198.
- J.-L. Fernandez-Hernando, S. Molloy, J. D. A. Smith, and N. K. Watson, “Measurements of Collimator Wakefields at End Station A”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP163, pp. 2868-2870.
- R. T. Dowd, G. LeBlanc, and K. Zingre, “Linac Waveguide Upgrade at the Australian Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC001, pp. 62-64.
- M. Checchin, A. Grassellino, M. Martinello, O. S. Melnychuk, A. Romanenko, and D. A. Sergatskov, “Origin of Trapped Flux Caused by Quench in Superconducting Niobium Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3309-3311.
- T. Lensch and S. Liu, “Status and Commissioning of the Wire Scanner System for the European XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1919-1922.
- T. Khabiboulline et al., “Recent Results of Testing 3-cell 3.9 GHz Accelerating Cavity at Fermilab”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP14, pp. 267-267.
- W. Anders, “Bunch Length Measurements at the BESSY Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 798-801.
- G. Franzini et al., “Analysis and Correction of Geometrical Non-Linearities of ELI-NP BPMs on Position and Current Measurements”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 235-237.
- C. Mitsuda et al., “The Construction Status of Beam Transport Line from XFEL-linac to SPring-8 Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC144, pp. 3224-3226.
- F. Furuta et al., “HOM Measurements for Cornell's ERL Main Linac Cryomodule”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 496-499.
- K. E. Robinson, S. C. Gottschalk, F. E. James, D. C. Quimby, J. M. Slater, and A. S. Valla, “Developement of a 10-m Wedged-Pole Undulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 783-786.
- S. Fukumoto and S. Takano, “KEK Preinjector Accelerating Column”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D02, pp. 189-192.
- T. L. Buller, T. D. Hayward, D. R. Smith, V. S. Starkovich, and A. M. Vetter, “Design of the APLE Accelerator Cavity”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-30, pp. 689-691.
- H. Tanaka et al., “Operation Status of the SCSS Test Accelerator: Continuous Saturation of SASE FEL at the Wavelength Range from 50 to 60 nanometers”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOAM01, pp. 1944-1946.
- E. V. Gorbachev et al., “Nuclotron and NICA Control System Development Status”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 437-440.
- M. Shuptar et al., “Mechanical Design of the Cryogenic Sub-Systems for ReA6 Quarter Wave Resonator Cryomodule”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA13, pp. 1256-1258.
- B. Podobedov, W. X. Cheng, Y. Hidaka, H.-C. Hseuh, and G. M. Wang, “NSLS-II Beam Lifetime Measurements and Modeling”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 416-418.
- M. D. McCaughan, J. F. Benesch, Y. Roblin, and T. Satogata, “First e-/Photon Commissioning Results for the GlueX Experiment/Hall D at CEBAF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1916-1919.
- W. Weingarten and R. G. Eichhorn, “Field-Dependent Surface Resistance for Superconducting Niobium Accelerating Cavities: The Case of N-Doping”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB010, pp. 95-99.
- K. Ko, Z. Li, and S. Tantawi, “Mode Launcher Design for the Multi-moded DLDS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP27F, pp. 1900-1902.
- P. Cameron et al., “Tune, Coupling, and Chromaticity Measurement and Feedback During RHIC Run 7”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC10, pp. 331-333.
- G. A. Loew, R. H. Miller, and C. K. Sinclair, “The SLAC Low Emittance Accelerator Test Facility”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-43, pp. 144-147.
- C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
- P. Belochitskii, “Status of the Antiproton Decelerator and of the ELENA Project at CERN”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOM1I02, pp. 6-10.
- V. P. Golubev, G. A. Nalivaiko, S. G. Tsepakin, and D. V. Efremov, “The Source of Negative Ions”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P10, pp. 356-357.
- A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3837-3839.
- H. von der Schmitt and H. Aufhaus, “A Modular System for the Control of Complex Accelerators Using Portable Software”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H06, pp. 274-276.
- Y. Xu et al., “Integrated Thermal Analysis of the FRIB Cryomodule Design”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD007, pp. 2510-2512.
- A. Aleksandrov, “Commissioning of the Spallation Neutron Source front End Systems”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MOPB002, pp. 65-69.
- E. V. Gorbachev and G. S. Sedykh, “Development of NICA Control System: Access Control and Logging”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 822-825.
- C. Mitsuda et al., “Suppression of Stored Beam Oscillation at Injection by Fast Kicker in the SPring-8 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 280-282.
- G. Franzini et al., “Measurements with the ELI-NP Cavity Beam Position Monitor Read-out Electronics at FLASH”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2169-2172.
- I. R. R. Shinton and R. M. Jones, “Large Scale Linac Simulations Using a Globalised Scattering Matrix Approach”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP034, pp. 619-621.
- S. A. Belomestnykh, V. D. Shemelin, K. W. Smolenski, and V. Veshcherevich, “Deflecting Cavity for Beam Diagnostics in ERL Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS004, pp. 2331-2333.
- A. Facco, C. Compton, J. Popielarski, and G. J. Velianoff, “Virtual Welding as a Tool for Superconducting Cavity Coarse Tuning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3412-3414.
- P. Wise et al., “Mechanical Engineering for the Front End Test Stand”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP041, pp. 448-450.
- S. Russenschuck et al., “Challenges for the Magnet System of LHeC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR075, pp. 1996-1998.
- K. L. F. Bane, C. K. Ng, and F. Zimmermann, “Collimator Wake Fields in the SLC Final Focus”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP099G, pp. 504-506.
- I. V. Bazarov et al., “Initial Beam Results from the Cornell High-Current ERL Injector Prototype”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU2GRI01, pp. 683-687.
- T. K. Charles et al., “Comparison of Bunch Compression Schemes for the AXXS FEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1399-1402.
- V. Litvinenko, Y. C. Jing, I. Pinayev, G. Wang, D. F. Ratner, and V. Samulyak, “Testing Aspects of Advanced Coherent Electron Cooling Technique”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 445-448.
- M. Berz, K. Joh, J. A. Nolen, B. M. Sherrill, and A. F. Zeller, “On-Line Correction of Aberrations in Particle Spectrographs”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 884-887.
- K. G. Simonov, A. A. Borisov, I. I. Golenitskiy, A. V. Mamontov, A. N. Yunakov, and O. A. Morozov, “Principles for Design of High Power Pulsed Microwave Devices and Devices with Low Operating Voltage for Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2273-2275.
- R. Kuroda et al., “Beam Diagnostics for Laser Undulator Based on Compton Backward Scattering”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP053, pp. XX-XX.
- A. I. Iliev and V. Senichev, “Racetrack Lattices for Low-medium-energy Synchrotrons”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1904-1907.
Back to search