Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Gonin et al., “Hydroforming Test of Back Extruded Niobium Tube”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C19, pp. 590-597.
[n] F. Meot et al., “eRHIC EIC: Plans for Rapid Acceleration of Polarized Electron Bunch at Cornell Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 108-111. doi:10.18429/JACoW-IPAC2018-MOPMF013
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] M. Akemoto, Y. H. Chin, and Y. Sakamoto, “Solid-State Klystron Modulator for JLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH028, pp. 3732-3734.
[n] A. J. Dobbs, A. Alekou, and K. R. Long, “The MICE Muon Beamline and Induced Host Accelerator Beam Loss”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP021, pp. 148-150.
[n] P. Tenenbaum, “Lucretia: A Matlab-Based Toolbox for the Modeling and Simulation of Single-Pass Electron Beam Transport Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT086, pp. 4197-4199.
[n] H. Takahashi et al., “Synchronized Data Monitoring and Acquisition System for J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH117, pp. 3077-3079.
[n] P. Kneisel, J. Mammosser, and J. F. Benesch, “Analysis of Mechanical Fabrication Experience with CEBAF's Production SRF Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 947-950.
[n] J. R. Alonso and T. Smidt, “High Power, High Energy Cyclotrons for Muon Antineutrino Production: the DAEdALUS Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS071, pp. 2667-2669.
[n] R. Calaga, “Some Aspects of 704 MHz Superconducting RF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO003, pp. 514-518.
[n] S. T. Artikova, M. Grieser, and J. Ullrich, “Investigation of Intrabeam Scattering in the Heavy Ion Storage Ring TSR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS005, pp. 2490-2492.
[n] S. Geyer, O. Meusel, D. Ries, and O. K. Kester, “A Transverse Electron Target for Heavy Ion Storage Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA015, pp. 97-99.
[n] A. Bogdanov, R. Maier, and Yu. Senichev, “Separatrix Formalizm in Super-conducting Linac Design”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE106, pp. 1235-1237.
[n] J. Franko, “The Method And Results Of Formation Of The Dc-60 Cyclotron Magnetic Field”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 432-434.
[n] I. Podadera et al., “The Medium Energy Beam Transport Line (MEBT) of IFMIF/EVEDA LIPAc”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS058, pp. 2628-2630.
[n] K. W. Shepard, M. Kedzie, J. R. Delayen, C. Piller, and A. M. Porcellato, “Development of Niobium Spoke Cavities for a Superconducting Light-Ion Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4082, pp. 956-958.
[n] S. Takama et al., “Completion of the Australian Synchrotron Storage Ring RF System Commissioning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN052, pp. 1040-1042.
[n] S. Posen, M. Liepe, and Th. Proslier, “Nb3Sn Materials Studies”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP019, pp. 92-94.
[n] H. Park, A. Castilla, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Analyses of 476 MHz and 952 MHz Crab Cavities for JLAB Electron Ion Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2348-2350. doi:10.18429/JACoW-IPAC2016-WEPMR034
[n] H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
[n] P. Kneisel, “Surface Characterization of Bulk Nb: What Has Been Done, What Has Been Learnt?”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO02, pp. 206-219.
[n] P. Kneisel, B. Lewis, and L. Turlington, “Experience with High Pressure Ultrapure Water Rinsing of Niobium Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I09, pp. XX-XX.
[n] A. Dubrovsky and J. A. Rodriguez, “An Automatic Control System for Conditioning 30 GHz Accelerating Structures”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP008, pp. 1541-1543.
[n] M. Dehler, I. Wilson, and W. Wuensch, “A Tapered Damped Accelerating Structure for CLIC”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4083, pp. 959-961.
[n] D. Sagan et al., “Unified Accelerator Modeling Using the Bmad Software Library”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC134, pp. 2310-2312.
[n] S. Kawata, A. Manabe, and H. Watanabe, “Cross-Field Acceleration by Electromagnetic Wave”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 703-706.
[n] E. Baron, “Invited Paper: Upgrading the GANIL Facilities for High-Intensity Heavy Ion Beams (T.H.I. Project)”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-02, pp. 39-44.
[n] P. Kneisel et al., “Investigation of Ingot Material with Large Grain for RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP58, pp. 382-382.
[n] R. Floersch, G. Domer, and N. Jett, “Resonance Control Cooling System for the APT/LEDA CCDTL Hot Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP1, pp. 649-651.
[n] H. Sato et al., “Switching Power Supply for the PFL Kicker Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE038, pp. 1165-1167.
[n] F. Sannibale, “Luminosity Optimization in DANE”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT09, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Gonin et al., “Hydroforming Test of Back Extruded Niobium Tube”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C19, pp. 590-597.
- F. Meot et al., “eRHIC EIC: Plans for Rapid Acceleration of Polarized Electron Bunch at Cornell Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 108-111.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- M. Akemoto, Y. H. Chin, and Y. Sakamoto, “Solid-State Klystron Modulator for JLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH028, pp. 3732-3734.
- A. J. Dobbs, A. Alekou, and K. R. Long, “The MICE Muon Beamline and Induced Host Accelerator Beam Loss”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP021, pp. 148-150.
- P. Tenenbaum, “Lucretia: A Matlab-Based Toolbox for the Modeling and Simulation of Single-Pass Electron Beam Transport Systems”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT086, pp. 4197-4199.
- H. Takahashi et al., “Synchronized Data Monitoring and Acquisition System for J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH117, pp. 3077-3079.
- P. Kneisel, J. Mammosser, and J. F. Benesch, “Analysis of Mechanical Fabrication Experience with CEBAF's Production SRF Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 947-950.
- J. R. Alonso and T. Smidt, “High Power, High Energy Cyclotrons for Muon Antineutrino Production: the DAEdALUS Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS071, pp. 2667-2669.
- R. Calaga, “Some Aspects of 704 MHz Superconducting RF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO003, pp. 514-518.
- S. T. Artikova, M. Grieser, and J. Ullrich, “Investigation of Intrabeam Scattering in the Heavy Ion Storage Ring TSR”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS005, pp. 2490-2492.
- S. Geyer, O. Meusel, D. Ries, and O. K. Kester, “A Transverse Electron Target for Heavy Ion Storage Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA015, pp. 97-99.
- A. Bogdanov, R. Maier, and Yu. Senichev, “Separatrix Formalizm in Super-conducting Linac Design”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE106, pp. 1235-1237.
- J. Franko, “The Method And Results Of Formation Of The Dc-60 Cyclotron Magnetic Field”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 432-434.
- I. Podadera et al., “The Medium Energy Beam Transport Line (MEBT) of IFMIF/EVEDA LIPAc”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS058, pp. 2628-2630.
- K. W. Shepard, M. Kedzie, J. R. Delayen, C. Piller, and A. M. Porcellato, “Development of Niobium Spoke Cavities for a Superconducting Light-Ion Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4082, pp. 956-958.
- S. Takama et al., “Completion of the Australian Synchrotron Storage Ring RF System Commissioning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN052, pp. 1040-1042.
- S. Posen, M. Liepe, and Th. Proslier, “Nb3Sn Materials Studies”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP019, pp. 92-94.
- H. Park, A. Castilla, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Analyses of 476 MHz and 952 MHz Crab Cavities for JLAB Electron Ion Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2348-2350.
- H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
- P. Kneisel, “Surface Characterization of Bulk Nb: What Has Been Done, What Has Been Learnt?”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO02, pp. 206-219.
- P. Kneisel, B. Lewis, and L. Turlington, “Experience with High Pressure Ultrapure Water Rinsing of Niobium Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I09, pp. XX-XX.
- A. Dubrovsky and J. A. Rodriguez, “An Automatic Control System for Conditioning 30 GHz Accelerating Structures”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP008, pp. 1541-1543.
- M. Dehler, I. Wilson, and W. Wuensch, “A Tapered Damped Accelerating Structure for CLIC”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4083, pp. 959-961.
- D. Sagan et al., “Unified Accelerator Modeling Using the Bmad Software Library”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC134, pp. 2310-2312.
- S. Kawata, A. Manabe, and H. Watanabe, “Cross-Field Acceleration by Electromagnetic Wave”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 703-706.
- E. Baron, “Invited Paper: Upgrading the GANIL Facilities for High-Intensity Heavy Ion Beams (T.H.I. Project)”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-02, pp. 39-44.
- P. Kneisel et al., “Investigation of Ingot Material with Large Grain for RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP58, pp. 382-382.
- R. Floersch, G. Domer, and N. Jett, “Resonance Control Cooling System for the APT/LEDA CCDTL Hot Model”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP1, pp. 649-651.
- H. Sato et al., “Switching Power Supply for the PFL Kicker Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE038, pp. 1165-1167.
- F. Sannibale, “Luminosity Optimization in DANE”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT09, pp. XX-XX.
Back to search