Favourites
For Word
[n] S. R. Markham and R. G. Eichhorn, “On Quench Propagation, Quench Detection, and Second Sound in SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3464-3466. doi:10.18429/JACoW-IPAC2015-WEPTY077
[n] S. Rugmai, P. Klysubun, C. Kwankasem, and P. Sudmuang, “Beam Based Alignment and COD Correction for the Siam Photon Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA020, pp. 130-132.
[n] V. C. Kempson, J. A. Dobbing, C. E. Hansen, N. Hauge, and G. Hilleke, “Pulsed Magnets and Pulser Units for the Booster and Storage Ring of the Diamond Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS028, pp. 3341-3343.
[n] C. M. Thomas and D. C. Faircloth, “Development of Emittance Scanner Software for ISIS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH037, pp. 1085-1087.
[n] N. Suradet, G. G. Hoyes, P. Klysubun, S. Krainara, P. Sudmuang, and S. Teawphet, “Improvement of the Siam Photon Source Beam Loss Monitor System”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 190-192. doi:10.18429/JACoW-IBIC2015-MOPB058
[n] D. McGinnis, J. Budlong, G. Jackson, J. Marriner, and D. Poll, “Design of 4-8 GHz Bunched Beam Stochastic Cooling Arrays for the Fermilab Tevatron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1389-1392.
[n] Y. Okumura, T. Inoue, H. Oguri, and H. Tanaka, “Development of a High Brightness Ion Source for the Proton Linear Accelerator (BTA) at JAERI”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-15, pp. 645-647.
[n] H. Fuchs, “Invited Paper: Nuclear-Physics Research with Heavy Ions in the 10 to 30 MeV/Nucleon Range: Birth and Death of Hot Nuclei”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-04, pp. 570-576.
[n] A. H. Lumpkin, H. Freund, and M. W. Reinsch, “Feasibility of an XUV FEL Oscillator at ASTA”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO51, pp. 88-91.
[n] G. Daniluk et al., “Solving Vendor Lock-in in VME Single Board Computers through Open-sourcing of the PCIe-VME64x Bridge”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 131-136. doi:10.18429/JACoW-ICALEPCS2017-TUAPL03
[n] R. Fliller III et al., “Crystal Collimation at RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUAGB002, pp. 200-202.
[n] M. Fujisawa et al., “Reduction In Resistive-Wall Impedance of Insertion-Device Vacuum Chamber By Copper Coating”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP10H, pp. 984-986.
[n] D. Leroy and R. Perin, “Development of High-field Superconducting Magnets for the Large Hadron Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 326-329.
[n] B. Ducoudret, A. Joubert, and F. Labussi?¿re, “GANIL RF Systems: Feedback Control Systems and Electronics”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-10, pp. 407-409.
For LaTeX
Use Complete Form
For BibTeX
References
- S. R. Markham and R. G. Eichhorn, “On Quench Propagation, Quench Detection, and Second Sound in SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3464-3466.
- S. Rugmai, P. Klysubun, C. Kwankasem, and P. Sudmuang, “Beam Based Alignment and COD Correction for the Siam Photon Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA020, pp. 130-132.
- V. C. Kempson, J. A. Dobbing, C. E. Hansen, N. Hauge, and G. Hilleke, “Pulsed Magnets and Pulser Units for the Booster and Storage Ring of the Diamond Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS028, pp. 3341-3343.
- C. M. Thomas and D. C. Faircloth, “Development of Emittance Scanner Software for ISIS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH037, pp. 1085-1087.
- N. Suradet, G. G. Hoyes, P. Klysubun, S. Krainara, P. Sudmuang, and S. Teawphet, “Improvement of the Siam Photon Source Beam Loss Monitor System”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 190-192.
- D. McGinnis, J. Budlong, G. Jackson, J. Marriner, and D. Poll, “Design of 4-8 GHz Bunched Beam Stochastic Cooling Arrays for the Fermilab Tevatron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1389-1392.
- Y. Okumura, T. Inoue, H. Oguri, and H. Tanaka, “Development of a High Brightness Ion Source for the Proton Linear Accelerator (BTA) at JAERI”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-15, pp. 645-647.
- H. Fuchs, “Invited Paper: Nuclear-Physics Research with Heavy Ions in the 10 to 30 MeV/Nucleon Range: Birth and Death of Hot Nuclei”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-04, pp. 570-576.
- A. H. Lumpkin, H. Freund, and M. W. Reinsch, “Feasibility of an XUV FEL Oscillator at ASTA”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO51, pp. 88-91.
- G. Daniluk et al., “Solving Vendor Lock-in in VME Single Board Computers through Open-sourcing of the PCIe-VME64x Bridge”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 131-136.
- R. Fliller III et al., “Crystal Collimation at RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUAGB002, pp. 200-202.
- M. Fujisawa et al., “Reduction In Resistive-Wall Impedance of Insertion-Device Vacuum Chamber By Copper Coating”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP10H, pp. 984-986.
- D. Leroy and R. Perin, “Development of High-field Superconducting Magnets for the Large Hadron Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 326-329.
- B. Ducoudret, A. Joubert, and F. Labussi?¿re, “GANIL RF Systems: Feedback Control Systems and Electronics”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-10, pp. 407-409.
Back to search