[n] C. E. Houghton, C. Bloomer, and L. Bobb, “An Experimental Comparison of Single Crystal CVD Diamond and 4H-SiC Synchrotron X-Ray Beam Diagnostics”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 21-25. doi:10.18429/JACoW-IBIC2021-MOOC02
[n] O. Piquet et al., “Performance Analysis from ESS Cryomodule Testing at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 727-730. doi:10.18429/JACoW-SRF2023-WEPWB064
[n] X. Huang, “Beam-based alignment simulations for the Future Circular Collider electron lattice”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 308-311. doi:10.18429/JACoW-IPAC2024-MOPG08
[n] M. A. Montironi, C. J. Andrews, G. Marcus, and H.-D. Nuhn, “Considerations From Deploying, Commissioning, and Maintaining the Control System for LCLS-II Undulators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1546-1548. doi:10.18429/JACoW-IPAC2022-TUPOMS052
[n] H. Guo, “Full automatic clean assembly of HWR cavity”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper WEXA004, unpublished.
[n] Y. Shoji, “Observation of Sub-THz Coherent Radiation from the Linac Beam Injected in the NewSUBARU Storage Ring”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP014, pp. 76-78.
[n] R. C. Juras, M. J. Meigs, D. K. Olsen, and C. M. Jones, “Use of the Holifield Facility 25-MV Tandem Accelerator in the Oak Ridge Radioactive Ion Beam Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1660-1663.
[n] M. Bueno, S. Fiedler, L. Kolwicz-Chodak, J. Meyer, and U. Ristau, “Cryogenics Monitoring and Control System for EMBL Facilities at PETRA III”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 167. doi:10.18429/JACoW-MEDSI2020-TUPB11
[n] H. Umezawa, M. Yamanaka, and N. Nishida, “Study on the strength of large grain sliced niobium discs”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS65, unpublished.
[n] R. Wanzenberg, M. Bieler, J. Keil, G. Sahoo, and M. Schaumann, “PETRA III operation and studies in 2022”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 415-417. doi:10.18429/JACoW-IPAC2023-MOPA155
[n] S. Fu et al., “Design of the CSNS DTL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP063, pp. 554-556.
[n] A. Zholents, “Fabrication and testing of corrugated waveguides for a collinear wakefield accelerator”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUYD1, unpublished.
[n] A. Bosotti et al., “Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP019, pp. 821-823.
[n] J. Saisut, M. Jitvisate, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulations of Linear Accelerator for Natural Rubber Vulcanization at Chiang Mai University”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2491-2493. doi:10.18429/JACoW-IPAC2022-THPOST021
[n] Y. Kobayashi, A. Ueda, T. Mitsuhashi, and T. Yamakawa, “Experimental Measurement of Dynamic Aperture at the Photon Factory Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 215-218.
[n] P. Nanthanasit, N. Chattrapiban, M. Jitvisate, P. Nimmanpipug, and S. Rimjaem, “Investigation on Intermolecular Interactions in Ionic Liquids Using Accelerator-based THz Transition Radiation”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3053-3056. doi:10.18429/JACoW-IPAC2022-THPOMS039
[n] W. F. Bergan, “Improvements to Simulations of Microbunched Electron Cooling for the EIC”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P2008, pp. 103-106.
[n] P. Wongkummoon, N. Kangrang, M. W. Rhodes, S. Rimjaem, J. Saisut, and C. Thongbai, “Design and Parameterization of Electron Beam Irradiation System for Natural Rubber Vulcanization”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3061-3063. doi:10.18429/JACoW-IPAC2022-THPOMS041
[n] G. Kropachev, T. Kulevoy, and A. Sitnikov, “Beam Dynamics in ITEP Heavy Ion Linac”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA05, unpublished.
[n] R. Veness, “Recommissioning of the CERN Injector Complex Beam Instrumentation”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 7-12. doi:10.18429/JACoW-IBIC2021-MOOB02
[n] C. H. Rivetta, J. D. Fox, and T. Mastoridis, “Identification of the Inter-Bunch and Intra-Bunch Beam Dynamics Based on Dynamic Modal Decomposition (DMD)”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 473-477. doi:10.18429/JACoW-IBIC2021-FROA01
[n] K. Takayama et al., “Synchrotron Radiation Damage Test of Insulating Materials in the TRISTAN MR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2205-2208.
[n] Y. S. Chung, G. D. Kim, J. W. Kwon, E. H. Lim, and H. J. Woo, “Overview of RAON Beam Instrumentation System and Construction Status of the Low-Energy Linac”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 13-15. doi:10.18429/JACoW-IBIC2021-MOOB03
[n] M. A. K. Othman et al., “Terahertz Driven Compression and Time-Stamping Technique for Single-Shot Ultrafast Electron Diffraction”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 492-494. doi:10.18429/JACoW-IPAC2021-MOPAB141
[n] P. Apiwattanakul, P. Lithanatudom, P. Nimmanpipug, C. Phueng-ngern, S. Rimjaem, and J. Saisut, “Monte Carlo Simulation of Electron Beam in Phantom Water for Radiotherapy Application”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3011-3013. doi:10.18429/JACoW-IPAC2022-THPOMS026
[n] T. Weiland, A. Novokhatski, W. Koch, and M. Krassilnikov, “Beam Dynamics On-Line Simulation”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB18, pp. 836-838.
[n] F. J. Cullinan, ?à. Andersson, and P. F. Tavares, “Longitudinal Stability with Landau Cavities at MAX IV”, in Proc. IPAC'20, Caen, France, May 2020, pp. 44. doi:10.18429/JACoW-IPAC2020-WEVIR05
[n] S. Fu et al., “Development of a 324 MHz Drift Tube Linac for CSNS”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP061, pp. 548-550.
[n] M. Yamanaka, “A Novel Twin Drive Tuner Mechanism for 1.3 GHz ILC Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 914-916. doi:10.18429/JACoW-SRF2023-WEPWB135
[n] S. S. Kurennoy and R. C. McCrady, “Beam Coupling Impedances of Ferrite-Loaded Cavities: Calculations and Measurements”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 696-699. doi:10.18429/JACoW-IPAC2021-MOPAB211
[n] R. Hrovatin, B. Ocepek, and M. Grewe, “High-reliability and high-performance machine protection system for a demanding electron linac”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG57, unpublished.
[n] S. Kato, “An Idea of Dynamical Cooling of Electron Beam in SR Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3518-3521.
[n] S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Beam Cross Section Monitor for INR Linac”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP085, pp. 605-607.
[n] C. I. Briegel, “Multi-Processor Network Implementations in Multibus II and VME”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 295-298. doi:10.18429/JACoW-ICALEPCS1991-S08NC02
[n] W. Phacheerak et al., “Solid-State Pulsed Power Supply for a 100 keV Electron Source of the New Synchrotron Facility in Thailand”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2803-2805. doi:10.18429/JACoW-IPAC2022-THPOTK015
[n] Q. Wu, G. Mahler, H. Witte, M. Blaskiewicz, S. Nagaitsev, and V. Ranjbar, “Self-correction coil for RCS dipole in Electron Ion Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1531-1533. doi:10.18429/JACoW-IPAC2024-TUPR49
[n] K. Hwang et al., “Beam Tuning at the FRIB Front End Using Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 983-986. doi:10.18429/JACoW-IPAC2022-TUPOST053
[n] A. Sitnikov, G. Kropachev, T. Kulevoy, D. N. Selesnev, and A. I. Semennikov, “The Tuning of RF Parameters of 40 MHz RFQ”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 139-141. doi:10.18429/JACoW-RuPAC2021-MOPSA04
[n] A. Fallahi, N. Kuster, and L. Novotny, “Coherent Radiation From Inverse Compton Scattering Sources by Means of Particle Trapping”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3732-3734. doi:10.18429/JACoW-IPAC2021-THXB07
[n] C. Thongbai et al., “Present Status of Linear Accelerator System for Natural Rubber Vulcanization at Chiang Mai University”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3057-3060. doi:10.18429/JACoW-IPAC2022-THPOMS040
[n] J.-P. Carneiro, H. T. Edwards, A. C. Melissinos, P. L. Colestock, M. J. Fitch, and W. H. Hartung, “Electro-Optic Sampling of Transient Fields From the Passage of High-Charge Electron Bunches”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC05, pp. 155-157.
[n] H. Umezawa, M. Yamanaka, and N. Nishida, “Statistical evaluation of mechanical properties of RRR300 niobium sheets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3897-3900. doi:10.18429/JACoW-IPAC2024-THPS64
[n] X. J. Deng, “Optical Stochastic Cooling in a General Coupled Lattice”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 143-146. doi:10.18429/JACoW-FLS2023-TU4P30
[n] B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3781-3784. doi:10.18429/JACoW-IPAC2024-THPS22
[n] K. Jayamanna, M. McDonald, P. W. Schmor, and D. H. Yuan, “The TRIUMF Compact DC H-/D- Ion Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 647-650.
[n] C.-Y. Tan, “Novel Tune Diagnostics for the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAD002, pp. 140-144.
[n] Y. Morozumi, “Higher Order Modes in a String of Multi-Cell Accelerating Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP066, pp. 4685-4685.
[n] S. Khan, N. Marquardt, W. Sandner, and I. Will, “Generation of Femtosecond X-Ray Pulses and Other Laser-Electron Beam Experiments at DELTA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP21G, pp. 1306-1308.
[n] R. C. Webber, “Challenges to the Fermilab Linac and Booster Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH057, pp. 2581-2583.
[n] J. L. Stanyard, V. Mertens, J. A. Osborne, Y. Loo, C. Sturzaker, and M. Sykes, “Optimisation of the Design of the Future Circular Collider from a Civil Engineering Perspective”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2392-2394. doi:10.18429/JACoW-IPAC2017-TUPVA127
[n] Y. Morozumi, F. Furuta, T. Higo, T. Saeki, and K. Saito, “Revision of Accelerating and Damping Structures for KEK STF 45 MV/m Accelerator Modules”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAKI03, pp. 2575-2577.
[n] R. J. Bakker et al., “Fast and Flexible BPM-System: Valuable Commissioning Tool for the BESSY II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP29G, pp. 1482-1484.
Use Complete Form