Warning
                The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
                    
    
    Favourites
    
    
    For Word
    
        
                            
[n]	M. Putignano and C. P. Welsch, “Optimization Studies of Planar Supersonic Gas-jets for Beam Profile Monitor Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE073, pp. 1149-1151. 
                            
[n]	S. X. Peng et al., “A Pepper-pot Based Device for Diagnostics of the Single-shot Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOAB102, pp. 3093-3095. 
                            
[n]	Q. S. Shu et al., “An Advanced Rotating T-R Mapping & its Diagnoses of TESLA 9-Cell Superconducting Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP11, pp. 1639-1641. 
                            
[n]	O. Bagnato, R. Defavari, F. Francisco, and D. Kakizaki, “Mechanical characterization of the BPMs brazing interface for Sirius storage ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM013, unpublished. 
                            
[n]	Y. Wu, “BEPC Upgrades and Tau-Charm Factory Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEX03B, pp. 48-52. 
                            
[n]	H. Du et al., “Dynamics Study of a Drift Tube Linac for Both Heavy Ions and Proton”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 148-151. doi:10.18429/JACoW-HIAT2018-WEPB08
                            
[n]	L. Adams and I. Thomson, “A Solid-State Dosimeter Based on a New Glow Curve for Beryllia”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4307-4311. 
                            
[n]	T. Bergmark, D. Li, D. Reistad, and Y. Yin, “D.C. to 100 kHz Beam Current Transformer for CELSIUS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP102L, pp. 1740-1742. 
                            
[n]	L. S. Stoel et al., “Phase Space Folding Studies for Beam Loss Reduction During Resonant Slow Extraction at the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 615-618. doi:10.18429/JACoW-IPAC2017-MOPIK046
                            
[n]	A. I. Drozhdin, D. E. Johnson, and L. G. Vorobiev, “Numerical Studies of High-Intensity Injection Painting for Project X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP059, pp. 1418-1420. 
                            
[n]	N. Golubeva, V. Balandin, and W. Decking, “Layout and Optics of the Dump Line at the European XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1138-1140. doi:10.18429/JACoW-IPAC2014-TUPRO049
                            
[n]	A. Ijspeert, A. Puntambekar, and J. Salminen, “Superconducting Sextupole Corrector Magnet for the LHC Main Dipoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP024G, pp. 2252-2254. 
                            
[n]	M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715. 
                            
[n]	B. Gottschalk, “Exact Calculation of Nonlinear Orbit Properties of a Synchrotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2267-2270. 
                            
[n]	N. Kuklev, I. Lobach, H. Shang, and R. Soliday, “Upgrades to logging and ml analytics architecture at APS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4432-4435. doi:10.18429/JACoW-IPAC2023-THPL008
                            
[n]	D. C. Carey, “The Effect of Errors in Charged Particle Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1146-1149. 
                            
[n]	J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP022, pp. XX-XX. 
                     
     
    
    For LaTeX
        
        
                            Use Complete Form
                    
    
    For BibTeX
        
    References
    
                    - M. Putignano and C. P. Welsch, “Optimization Studies of Planar Supersonic Gas-jets for Beam Profile Monitor Applications”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE073, pp. 1149-1151.
- S. X. Peng et al., “A Pepper-pot Based Device for Diagnostics of the Single-shot Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOAB102, pp. 3093-3095.
- Q. S. Shu et al., “An Advanced Rotating T-R Mapping & its Diagnoses of TESLA 9-Cell Superconducting Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPP11, pp. 1639-1641.
- O. Bagnato, R. Defavari, F. Francisco, and D. Kakizaki, “Mechanical characterization of the BPMs brazing interface for Sirius storage ring”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM013, unpublished.
- Y. Wu, “BEPC Upgrades and Tau-Charm Factory Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEX03B, pp. 48-52.
- H. Du et al., “Dynamics Study of a Drift Tube Linac for Both Heavy Ions and Proton”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 148-151.
- L. Adams and I. Thomson, “A Solid-State Dosimeter Based on a New Glow Curve for Beryllia”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4307-4311.
- T. Bergmark, D. Li, D. Reistad, and Y. Yin, “D.C. to 100 kHz Beam Current Transformer for CELSIUS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP102L, pp. 1740-1742.
- L. S. Stoel et al., “Phase Space Folding Studies for Beam Loss Reduction During Resonant Slow Extraction at the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 615-618.
- A. I. Drozhdin, D. E. Johnson, and L. G. Vorobiev, “Numerical Studies of High-Intensity Injection Painting for Project X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP059, pp. 1418-1420.
- N. Golubeva, V. Balandin, and W. Decking, “Layout and Optics of the Dump Line at the European XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1138-1140.
- A. Ijspeert, A. Puntambekar, and J. Salminen, “Superconducting Sextupole Corrector Magnet for the LHC Main Dipoles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP024G, pp. 2252-2254.
- M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715.
- B. Gottschalk, “Exact Calculation of Nonlinear Orbit Properties of a Synchrotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2267-2270.
- N. Kuklev, I. Lobach, H. Shang, and R. Soliday, “Upgrades to logging and ml analytics architecture at APS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL008, pp. 4432-4435.
- D. C. Carey, “The Effect of Errors in Charged Particle Beams”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1146-1149.
- J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP022, pp. XX-XX.
Back to search